Robust, reliable and rust-resistant, our galvanised steel sheet is just the job when weather-proofing is a must. With its tough coating of zinc carbonate, it's designed to withstand the most extreme of the elements and last for a very long time. From walls to washing machines, the scope for our best-selling metal is endless.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
1322 Steel Sheets Suppliers
Short on time? Let Steel Sheets sellers contact you.
Galvanized steel coils are steel coils that have been coated with a layer of zinc to protect the steel from corrosion This process is known as galvanization These coils are widely used in various industries including construction automotive and manufacturing due to their durability resistance to rust and versatility The zinc coating provides a protective barrier that helps prevent corrosion and increases the lifespan of the steel
HS Code
The Harmonized System HS code for galvanized steel coils typically falls under the following classification
HS Code 7210 Flatrolled products of iron or nonalloy steel galvanized or plated with zinc
Subcategories
721011 Hotrolled galvanized steel
721012 Coldrolled galvanized steel
721030 Other galvanized steel products
Specifications
Material Hotrolled or coldrolled steel
Coating Type Zinc coating galvanized
Coil Weight Typically ranges from 1000 kg to 10000 kg
Coil Width 600 mm to 1500 mm depending on customer requirements
Thickness 02 mm to 30 mm
Zinc Coating Weight Measured in gm typically ranging from 60 gm to 275 gm higher zinc coating for more corrosion resistance
Surface Finish Bright spangled or nonspangled depending on the galvanization process
Edge Type Mill edge slit edge or trimmed edge
Product Standard
The quality and performance of galvanized steel coils are governed by international and national standards Common standards include
ASTM A653A653M Standard specification for steel sheet zinccoated galvanized by the hotdip process
JIS G3302 Japanese Industrial Standard for hotdip galvanized steel sheets
EN 10346 European standard for continuously hotdip coated steel flat products
ISO 3575 International standard for continuously hotdip galvanized steel sheets
XPS (Extruded Polystyrene) foam insulation boards are commonly available in 4x8-foot sheets. These sheets are used for various insulation applications in construction, such as insulating walls, roofs, and floors. XPS insulation is known for its closed-cell structure, which provides good thermal resistance and moisture resistance.
3/4" PVC sheets in a 4x8-foot size are not commonly manufactured or available in the same way as traditional plywood or other sheet goods. PVC (polyvinyl chloride) is commonly used in construction for pipes, fittings, and various other applications, but sheets of such dimensions and thickness are not as standard as they are for materials like plywood, MDF, or particleboard.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
