Successful trial of this marking machine, first try to name the trunk road program discontinuity lines of the three, in line width of 15 cm, 10 cm wide dividing line, good practice, has not undergone any mechanical failure. Marking machine chassis car are used as the connection couplings to the standard auto parts, so removal is very convenient, not to engage in lines painting construction, carrying the car to complete the transportation task, a dual-purpose vehicle. The rapid increase in car ownership, the new construction of a large number of highways, urban roads and rural roads, marking paint demand soared, the new coating material with special security features continue to emerge, such as the ability to prevent the vehicle on the downhill and turn slip road skid coating; various shapes protruding structure marking paint, not only reflective properties good day 'in the rainy night marking the protruding part of the film of water flooded, and maintain a certain reflective properties, but also the paint marking designating the eye-catching flash rain line. It is worth mentioning that marking material construction technology and construction machinery has a great influence on the quality and performance of the coating, such as solvents at room temperature, water-based, two-group classification marking paint can be used high-pressure airless spray marking paint spray. Such as hot melt coating construction with a centrifugal coating method, the minimum coating thickness of the coating of the marking Hill original 1.5mm down to 0.7 mm, in the case of small changes in life, can reduce the amount of paint used. The hot melt classes and group classification coatings use of specialized construction machinery can be designated projecting marking shock features and reflective at night, the drainage pavement marking construction is also a good choice.
Zhengzhou Dayu Road Marking Machinery Company was set up in the year 1992. As traffic lane coating facilities supplier in China, we are slao highest level of international road lane coating equipment manufacture, present by road marking equipment and kinds of qualified traffic coating paint. Our famous products are thermoplastic coating devices and reflective traffic lines marking paint! Dayu lines striping equipment has been sell well in China and have been exported abroad for our various strict product lines, reliable product quality, considerate sales service and competitive price! For more products models and types, please visit our machine
According to the engineering and construction experience, it is recommended that the conditions of use for marking for different roads, different regions, the choice of the traffic painting type and painting materials. applied. Solvent-based marking paint. It is a traditional type road marking paint, and it has the advantages of low cost, fast construction, easy to operate, adaptable, commonly used in urban road markings and less demanding provincial highway. Hot melt spray coating material. It is based on the thermoplastic hard resin-based material preparation, the powder room temperature. Construction of special equipment (thermal reactor) the coating is heated to 180 degrees Celsius to 220 degrees Celsius, the formation of a flowing liquid, coating the road to form a hard film. Hot melt marking paint contains reflective glass beads, reflective well. Hot melt spray-type marking film thin (8mm-2mn), construction speed, spray marking table uniform, neat edge, concept of linear Off. Anti-pollution performance is better than ordinary hot melt coating. By changing the coating material applied to the road of the city towel, and anti-pollution facilities after marking performance is greatly improved compared directly and room temperature coatings. Cracks are smaller than scratch-painting. Hot melt spray road marking paint used in the construction of low-pressure gas, centrifugal coating, marking after the film has no internal stress, at the same time marking the coating is thin, subjected to temperature changes caused by the shrinkage stress is relatively small. Higher value of anti-slip. Hot melt spray road marking is a uniform coating on the pavement, the marking surface after the completion of the original road, thus marking slip resistance.
Henan dayu road marking machine Co., Ltd. was founded in 1992, is a leading professional traffic lanes coating facilitie manufacturer in China. Road machinery production base covers an area of 1.7 million square meters, with a construction area of nearly 100,000 square meters. Henan Dayu Road Marking Machinery Company, is internationally renowned lanes painting machines supplier, represented by special road lane construction machinery, highway road marking paint,and dedicated electronic traffic safety facilities,including thermoplastic spraying machines, cold solvent road marking machine, air-auxiliary lane coating equipment, two component road marking machines, auxiliary road marking equipment and kinds of traffic lines coating materials, respective for machine types.
Road lines marking construction requires a number of auxiliary lane striping equipment (http://www.Road-marking-machine.Com) to complete the function of all aspects of traffic marking construction. Auxiliary road striping equipment includes roll booster, primer sprayer, hand-push pre-marker, loader and unloader and wind-force road cleaner. These road painting equipment are optional for customers to solve transportation difficulties of large road marking machines, and improve the road marking quality and efficiency.
Road lines reflective principle is relied on the directional reflection effect of the glass beads sprayed and painted on the road surface. When the incident illumination enter into the glass beads body since the air is light-repellent substance, glass beads are optically dense substances, and thus produces the refraction phenomenon and deep fold to reflection within the lines coatings and in the contact surface of the glass and coatings.
Features of dayu brand thermoplastic road marking materials
1. Fast drying and relatively good abrasion resistance: The road will be open to traffic after 10 minutes for its fast drying, and can be maintained for over six months.
2. Good adhesion: There will be no stripping on the condition of assure the road surface is dry and clean and film thickness before coating road materials on it.
3. Bright and beautiful: Bright in color and meet industry standard. Road Marked Lanes with no yellowing, discoloring, cracking, but strong visibility.
4. Convenient construction: No special requirement for construction machine. Both equipment painting and manual spraying type are proper.
5. Brand traffic marking materials are made of high quality raw material, and its whole production processes of thermoplastic machine paint are finished by completely automatic production line, absolutely avoid quality defects caused by artificial operation, such as over large mixture ratio, unstable quality, and further make sure the traffic coating paint of high quality to customers.
Methods to solve the poor reflectivity of marked pavement lines
Reflective road lines painting is not an easy task. It requires a certain objective conditions and the subjective efforts, extensive construction experience, scientific principle, so the following problems should be paid great attention to resolve during traffic lines construction:
Suitable embedded depth of the elements will lead a good reflective effection. Generally, the best depth is half embedded in the coatings, half exposed. If the glass beads body is embedded too deep, the reflection refractive will not come back. If embedded too shallow, to nuch exposed, the surface of the glass beads body will be worn off soon, the shininess is poor.
The appropriate spreading amount of glass beads is another important point for good reflectivity. The beads amount coated in road lines is too small, result in insufficient reflectivity. Excessive beads, on the one hand, will prone to dense refraction; and also a waste of glass beads, causing pollution. The best reflective effect is per square meter 0. 37k-0. 45k.
Dy-hal-i/ii and dy-hal-iii/iv are hand-push airless cold solvent traffic lines marking machine, mainly used for small scale road line marking such as the zebra crossing marking, stop line, sports line, special letters and arrow mark, etc.
1. Firm welded frame chassis, is chrome-plated or corrosion resistant coating sprayed. Equipped with imported high-speed bearing, the whole machine is much lighter and more convenient.
2. Front wheel directional device can lock the front wheel to ensure the road-marking machine move freely in striping straight lines and turnings marking.
3. Adjustable guide rod can be freely adjusted up, down, to the left or right.
4. Equipped with high light warning lights makes the night working convenient. The flicker frequency can be freely adjusted, which greatly improved the safety of the marking work.
5. The new-type diaphragm type high pressure airless paint pump is with big flow and stable pressure.
6. Paint tank is with a build-in filter device and air in-take filter in the feeding port.
7. New-type manual spraying guns with reverse washed nozzle can make the road paint on-spot discharging easy and convenient.
The two-component road marking is a new type and superior road marking and popular in recent years. It is different from thermoplastic and cold paint road line marking, which forms coating relying on chemical reaction instead of physical drying such as temperature falling or solvent ( water-based) volatilizing. The two component road marking machinery can be divided into swing structure type, screeding flat-line type and high-pressure airless spraying type according to different paints and different construction shapes.
Meanwhile, these three types road lines painting can be divided into marking vehicle, driving type line marking and self-propelled type according to different degree of automation, functional configuration, construction quality and efficiency. As for the two-component marking vehicle, its truck platform and electronic control system are basically the same with the airless road marking truck except its functional module.
Yn917 mini wheel loader with euro 3 engine/joystick control/quick hitch/rops/4 in 1 bucket/new cabin. Ce approved
Rated load/capacity/power: 1000kg/0.5m3/44kw. Euro 3 chinese xinchai engine. Saperate convertor and transmission. Dump height:2660mm. Opearting weight: 3700kg.
Yn938 front end loader with lovol perkins euro 3 engine/joystick control/air conditioner/rops. Rated load/capacity/power: 3000kg/1.8m3/92kw.
Dump height: 3000mm.
But the relatively high price of the nozzle. Equipment carrier steel-brush remover classification the vehicle marking machine: driving horse forms of driving the vehicle before and after the device machinery used in large-scale projects, long-distance construction crossed, the operator must understand the driving technology-driven walking, road making paint pre-heater for sale saving time and effort. Self-marking machine: hand drive form, mechanical drive unit, self-help walking, without human help, applied to large and medium-sized projects, vehicle operation inconvenience excursions construction, smart and easy to operate. The hand push marking machine: walk booster form manually push the rotary skating device requires the use of human walking, for use in small projects, short construction activities convenient road marking paints and flexible operation. According to the construction of the classification of raw materials hot melt marking machine: up gradually developed to improve with the development of.
The hot-melt coating is a high degree of automation machinery. Road line marking construction requires a several equipment from melting expect all aspects of construction marking function. The equipment by the thermal reactor marking machine (including the zebra crossing marking machine), the pre-marking machine hydraulic pre-heater, under the paint of the basic configuration. Of course, the user can be different models, different grades and different functions according to its economic strength, the size of the project amount and degree of specialization of different optional equipment configuration. Configuration in hot melt marking machine can be divided into the hot melt screeding type, hot melt extrusion and hot melt spray three types based on their crossed. Thermoplastic road marking room temperature marking machine: normal temperature marking the oldest a conventional marking, such marking is generally a normal temperature marking machine to complete the construction. Double-cylinder pre-heaters normal temperature.
Description:
Main features:
Originally from Komatsu technology, high reliability and productivity
Cummins China engine, powerful and reliable
Torque converter and counter-shaft transmission gearbox are separated independently, higher reliability and easier maintenance
Driving Axle in Meritor technology
Fully hydraulic steering system, power shift transmission, easy to operate
Comfortable operation environment, spacious cabin, Grammer seat,
Various attachment are available, such as Log clamp, pipe clamp, rock bucket, loose bucket etc.
Description:
Main features:
--originally from komatsu technology, high reliability and productivity
--chinese engine, powerful and reliable
--torque converter and counter-shaft transmission gearbox are separated independently, higher reliability and easier maintenance
--driving axle in meritor technology
--fully hydraulic steering system, power shift transmission, easy to operate
--comfortable operation environment, spacious cabin, grammer seat,
--various attachment are available, such as log clamp, pipe clamp, rock bucket, loose bucket etc.
