Dy-hal-i/ii and dy-hal-iii/iv are hand-push airless cold solvent traffic lines marking machine, mainly used for small scale road line marking such as the zebra crossing marking, stop line, sports line, special letters and arrow mark, etc.
1. Firm welded frame chassis, is chrome-plated or corrosion resistant coating sprayed. Equipped with imported high-speed bearing, the whole machine is much lighter and more convenient.
2. Front wheel directional device can lock the front wheel to ensure the road-marking machine move freely in striping straight lines and turnings marking.
3. Adjustable guide rod can be freely adjusted up, down, to the left or right.
4. Equipped with high light warning lights makes the night working convenient. The flicker frequency can be freely adjusted, which greatly improved the safety of the marking work.
5. The new-type diaphragm type high pressure airless paint pump is with big flow and stable pressure.
6. Paint tank is with a build-in filter device and air in-take filter in the feeding port.
7. New-type manual spraying guns with reverse washed nozzle can make the road paint on-spot discharging easy and convenient.
The two-component road marking is a new type and superior road marking and popular in recent years. It is different from thermoplastic and cold paint road line marking, which forms coating relying on chemical reaction instead of physical drying such as temperature falling or solvent ( water-based) volatilizing. The two component road marking machinery can be divided into swing structure type, screeding flat-line type and high-pressure airless spraying type according to different paints and different construction shapes.
Meanwhile, these three types road lines painting can be divided into marking vehicle, driving type line marking and self-propelled type according to different degree of automation, functional configuration, construction quality and efficiency. As for the two-component marking vehicle, its truck platform and electronic control system are basically the same with the airless road marking truck except its functional module.
It is the most typical cold paint road marking machine, oftentimes called cold paint striper or cold striping machine as well, is widely used for spraying cold-solvent paint, water-based paint and other single-component paint, can be applicable to various construction environments as well. It has the characteristics of stable performance, flexible operation and convenient construction and so on.
Engine 5.5HP Honda gasoline engine
Marking method High pressure airless spraying
Paint pump flow 9L/min
Rated maximum working pressure 20Mpa
Paint pump and control mode Piston reciprocating, single pump
Applicable paint Cold-solvent, water-based and other single-component paint
Marking width 100-600mm adjustable
Spray gun quantity 2 manual fixed spray gun
Dimension 1780x980x1200mm
Weigh 150Kg
Product: thermoplastic road marking paint
Used for: asphalt and concrete
Raw materials: c5 petropols, eva, pe wax, titanium dioxide, filler materialsâ?¦
Appearance: powder
Color: white/yellow (or other colors according to buyer's requirement)
Coating thickness: 1.6mm-2.0mm
Abrasion resistance: 56.8
Glass beads: 0%/10%/20%/25%/30%
Softening temperature: 90-104â°c
Heating temperature180-220â°c
Drying time after marking touch dryâ??3 mins full dryâ??10 mins
Shelf life 1 year
Storage: store in a tightly sealed container in a cool & dry place
Area of line:
1 ton thermoplastic paint can mark about 200 m2
Thermoplastic Road Marking Paint is a 100% solids material blend of binder, pigments, glass beads, peformance additives and other wear-resistant fillers. The binder is made from petroleum-derived resins, it is the best used for long-lifespan road marking applications. Intermixed and drop-on glass beads provide retroreflectivity for nighttime visibility of the road marking. Its composition specification and physical technical data conforms to BS3262-1:1989 Part 1 standard.
