*The engine adopts famous brand engine, 100% inspection before delivery.
*The Snow Cleaning Machine adopts full metal jacket design,after oxidation spray,anti-corrosion rust proof,long service life.
*Double LED lamp of operation panel, greatly improving the workers efficiency and safety at night and early morning.
*The Snow Cleaning Machine uses monolithic auger design, low cost of vulnerability consumption and easy replacement.
*The Snow Cleaning Machine has the advantages of fashion appearance,mult functions, light and flexibility,simple operation.
The snow removing equipment is the necessary equipment of snow cleaning for farm,orchard, schools, parks, squares, residential areas, garden, lanes sideways, bridges and other key securing sites and widely used in snow winter. This equipment could improve the efficiency of snow removal, reduce labor intensity, and ensure pepole going out more safety and convenient.
1).The road sweeper can be matched to tractor,wheel loader,forklift,
2).powered by hydraulic output of these machinery,only tractor could be driven by PTO.
3).PP with steel wires brushes.
4).Working width from 1200 to 2500mm
5).Suitable for cleaning road,street,floor and other flat.
The adjustable louver allows you to control the amount of air entering the building by allowing you to adjust the angle of its fins.
Made of galvanized sheet, galvalume, pintro, kynar, or stainless steel with galvanized hardware. Additionally, it can be manufactured with mosquito net or aviary for added protection, as well as allowing the placement of lters to control the entry of dust.
DESIGN
Custom made according to the project.
Thickness of 4 or 6.
Perimeter moldings designed according to the type of wall.
Made of galvanized sheet, galvalume pintro, kynar cal. 22.
Optionally it can be manufactured in natural aluminum
or stainless steel cal. 18.
Quick and easy installation on site.
Light and durable.
Silicone Emulsion 60% is used in industrial applications such as in Rubber and plastics as release agents and lubricants, in Food trays and plastic serving dishes as release agents, in Car polishes and household cleaners to improve protection, resistance, gloss and spread ability and in Textile finishing to enhance feel, water repellency and reduce the need for ironing. Silicone Emulsion 60% is also used in Perlite, vermiculite and clay and other building materials to improve water repellency and protect against dampness. Itâ??s used in Printing and papermaking for lubrication and as an antistatic agent. Silicone Emulsion 60% used as a Release agent for industrial rubber tire plastics and casting materials; Rotary offset printing lubricant; Industrial waterproofing agent and release agent; Additives for maintenance products; Polishing agent for floors and furniture; And Leather maintenance products, etc.
Silicone Emulsion 60%
WC Code: 24-005-04
Sales Specification
Appearance: White Liquid
Odour: Characterictic
Solid content (%): 60.00 �± 2.0
pH Value: 8.0 �± 1.0
Density (g/cm3): 0.953 �± 0.02
Soluble in water: Miscible
TYPES
1
Cement 42.5 N
CEM II/A-L
Bulk
2
Cement 42.5 R
CEM II/A-L
Bulk
3
Cement 42.5 N
CEM II/A-L
Big Bag 1.5MT
4
Cement 42.5 R
CEM II/A-L
Big Bag 1.5MT
5
Cement 42.5 N
CEM II/A-L NA 442
Bag 50Kg BUNDLED 2,2 MT per pallet
6
Cement 42.5 N
CEM II/A-L NA 442
Bag 25kg BUNDLED 2,15 MT per pallet
7
Cement 42.5 N-LH/SR5
CEM I
Bulk
8
Cement 42.5 N-LH/SR5
CEM I
Bag
9
Cement 52.5
CEM I
Bulk
10
Cement 52.5
CEM I
Bag
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller ´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
Please contact for full specs on quantities, delivery terms, etc...
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
1000 liter / 275 gallon repurposed rain tank. These are used & new tanks, food-grade tanks are comprised of a galvanized metal frame with a pallet (metal, plastic, or wood) and a plastic HDPE bottle. The rain tank has a 6, 8, or 12-inch top-fill cap and a 2-inch bottom butterfly or ball valve. The tanks may or may not include a plastic cap with a buttress or NPT thread for the bottom valve. If a valve cap is included, it can be drilled to accept our garden hose spigot assembly. A spigot assembly and 7/8 inch hole saw are not included. The dimensions are approximately 39 inches wide across the bottom valve, 47 inches deep, and 48 inches tall and the tanks weigh approximately 75 lbs empty. Previous contents may include olive oil, fish oil, organic fertilizer or beverage concentrates and some residue may still remain inside. The residue, if any, will only enrich the soil.
High strength and high corrosionproof, provides long service life and convenient to fill and clean.
It provides wide applicability and can be widely applied for packaging in industries such as chemical engineering, petroleum, medicine and food etc.
Seal liquid test:Put the sealed barrel with liquid upside down or tap,the seal is at the lowest position,and no leakage within 24 hours.
The standard specifies blow-moulding technology requirements of the barrel, test methods and the rules and symbols, packaging, transporting and storage. This standard applies to polyethylene as the main raw material, barrels production through automatic blow molding machine,and this type of blow molding barrel is mainly used for solids or chemical products.
We also can help to change any design as your requirements. such as size,weight,color,capacity ect.
Sulfate Resistant Portland Cement SRPC also named Sulfate Resistant Cement SRC is one of hydraulic binding materials can resistance to sulfate ion attack
Type High Sulfate Resistant Cement PHSR and Moderate Sulfate Resistant Cement PMSR
Grade 325 425
Application
To make concrete of sulfate resistance marine concrete maritime works
To make cement boards precast cement products cement pipes precast concrete pile shop fabricated members
Sea water attack resistance projects for example sea wall dam mariculture project sea water desalination project oceanarium etc
Chemical resistant engineering concrete
To make sulfate resistant concrete engineering of harbor water conservancy underground tunnel drainage pipe diversion works road and bridge foundation etc
Our Steel Walkway System (Catwalk Systems) are a walker attached to the roof system by means of SC-8 oppressors that do not pierce the SSR sheet. It oers a non-slip and safe surface to travel on the roofs and perform maintenance activities on A / C equipment, extractors, etc.
DESIGN
Widths of 12 , 24, 36 , or 48.
Cal galvanized material. 14, 16, or 18.
Easy and fast installation.
Without SSR roof perforations.
Maintenance free.
Optional safety rail.
Special oppressors for dierent types of panels.
CATWALK SYSTEM
Prefabricated, yet custom metal catwalk designs.
Custom decking options for foot-traffic, pallet jacks, building codes, and more.
Easy to install, bolt-together design.
Meet IBC and OSHA code.
Provides ease of access to machinery and equipment.
Free-standing design does not require support from existing structure.
Since ancient times, people have used hydrated lime to build houses and high buildings. Today, the massive architectural works and high-rise buildings are constructed more and more.
Why appear firm architectural construction?
That is cement â??important hydraulic binder in building process, helping to link projects together, forming a solid mass.
With modern advanced machines and science, abundant human resources.
Portland cement is the most common type of cement in general use around the world, used as a basic ingredient of concrete, mortar, stucco, and most non-specialty grout.
It is a fine powder produced by heating materials in a kiln to form what is called clinker, grinding the clinker, and adding small amounts of other materials. Several types of Portland cement are available with the most common being called ordinary Portland cement (OPC) which is grey in color, but a white Portland cement is also available.
Paint production involves the formulation and manufacturing of high-quality coatings designed for durability, aesthetics, and protection. Using advanced technology and a variety of finishes, the process caters to diverse applications, including residential, industrial, and commercial surfaces.
4106 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
