Machine Structure Horizontal
Color Grey
Voltage 440
Condition Used
Operating Mode Automatic
Power 3-6kw
Pressure High Pressure
Uses Automotive Industry, Steel Industry
Specialities High Performance
Port India port
Used complete gas turbine plants / heat recovery steam generator from 40-150 Mw, Siemens, GE, Pratt & Whitney , Alstom etc.
No one year warranty on used equipment
Price only valid for GE 6000, not for the other manufacturers. Price depends on size and manufacturer.
We can provide services for the purchase of Aviation Turbine Fuel (Jet A1, JA1, JP A1) for export.
Origin: Kazakhstan/ Russia, MOQ:500.000BBLS, FOB price: $73/$69, CIF price: $69/$65 (Gross and Net respectively).
contact us for the procedure.
Note: Seller do not work according to someone else's procedures.
The seller will deliver on the terms: CIF / FOB ports ROTTERDAM, SHARJAH UAE/MERSIN TURKEY, UST-LUGA.
The purpose of this document is to provide instructions for the use of TC200A an oilsoluble ultrahigh alkali
magnesium additive specifically designed to inhibit vanadium in ashforming crude and residual fuels for gas
turbines
TC200A additive is a turbinequality oilsoluble organomagnesium fuel additive prepared by reacting high
purity magnesium compounds with carboxylic acid It possesses excellent physical and chemical properties and
is proprietary in its formulation The additive can be easily dissolved in heavy fuel oil in any proportion
The primary function of TC200A additive is to supply available MgO which reacts with V2O5 present in heavy
fuel oil forming a highmeltingpoint vanadium magnesium compound through chemical combination This
compound effectively inhibits vanadium corrosion and results in the formation of dispersed ash that is carried
away with the turbine exhaust gas
The recommended dosage of TC200A additive in heavy fuel oil is around 3 to 35 MgV3 to 35 or as per the
instructions provided by the gas turbine manufacturer When calculating the additive dosage the nickel content
in the heavy fuel oil must be considered along with vanadium
TC200A additive is manufactured in strict accordance with GE standard GEK28150B It exhibits stability to
hydrolysis is oilsoluble nonvolatile and harmless The additive is suitable for use in heavyduty gas turbines
employed in industrial marine and utility applications
Additive Type Oil Soluble and oil spersed
Magnesium content 20
Physical appearance Brown or black viscous liquid
Density 120125gml 20
Viscosity 60mm2s 40
Flash Point 65
Pour Point 20
NaK 50mgKg
Ca 500mgKg
Pb 5mgKg
V 5mgKg
turbine
Material:low alloy
Weight:60.7kg
Process: investment casting+Machining
Description:Turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work
Material:low alloy
Weight:60.7kg
Process: investment casting+Machining
Description:Turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work
We offer the best competitive pricing for a large range of parts from nuts and bolts, gaskets, thermocouples, valves and sensors to major "Hot Gas Path" components such as nozzles, buckets, X-Fire tubes, combustion liners, fuel liners, fuel nozzles, and transition pieces. All of our parts carry a full one-year warranty against defects in material or workmanship.
Origin: Kazakhstan
The detailed specification: Meets all International Standards
Total Spot quantity order: 2.000.000 BARRELS
The price and discount:
- FOB ROTTERDAM: DISCOUNT $4 PER BARREL FROM NWE PLATTS CODE
LINE â??PJAAV00â??
Shipment:
- TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per
conditions in Seller`s FCO
Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via
MT103
Payment Procedure: According to the terms of the contract, to be mutually agreed upon
by Buyer & Seller.
Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
In a Francis turbine, the water flows radially into the turbine and axially out of the runner. The Francis turbine, invented by an American engineer in 1849, is the most widely deployed modern turbine. The main characteristics of the Francis turbine are - a wide range of water head, simple and reliable structure, and high efficiency.
A Francis Turbine can be supplied for a head of 15 m to 250 m. The runner diameter is available from 0.4 m to 4.5 m. Power capacity is from 75 kW to 50 MW.
New style francis turbine, compared to the old one, it has the advantages of convenient installation, high efficiency, low noise and compact structure.
The Axial turbine is for low head power plants. Water flows axially into and out of the turbine. Axial flow turbines fall into two categories, fixed blade runner and variable pitch runner, also known as a Kaplan turbine.
Fixed blade turbines are very well suited to low head power plants with limited variation in head and load.
Its main advantage is its simple design. When operated at fixed speed, maximum efficiency is achieved at the design head and water flow.
Kaplan turbines are used for medium to large power stations where there are large variations in the head, water flow and load.
Its main advantage is its ability to adapt to variable conditions with a high efficiency. The variable pitch runner is mechanically more complex than a fixed pitch runner. Axial flow turbines can be supplied for a head of 2m to 70 m. The runner diameter is available from 0.6 m to 5 m. Power capacity is from 55 kW to 50 MW.
The tubular turbine is an axial flow turbine, in a straight or S-shaped configuration.
A Tubular Turbine can be supplied for a head of 2 m to 30 m. The runner diameter is available from 0.8 m to 5.6 m. Power capacity is from 250 kW to 15 MW.
This turbine has high efficiency and lower constructon cost.
The runner has bucket shaped blades on the periphery. The jet of water is tangential to the runner.
The characteristics are, high head applications, a simple design, few problems with cavitation, highly cost effective.
Pelton turbines can be supplied for a head of 100m to 500 m. The runner diameter is available from 0.55 m to 1.5 m. Power capacity is from 200 kW to 10 MW.
Inclined jet turbine:
The water flows into and out of the runner at an angle to the main shaft.
The characteristics are high efficiency over a wide range of water flow, more flexible installation options, somewhat more complex than a Pelton turbine.
Inclined jet turbines can be supplied for a head of 60m to 300 m. The runner diameter is available from 0.32 m to 0.8 m. Power capacity is from 55 kW to 6.3 MW.
Proven reliability and high efficiency makes Kessels multi-stage steam turbines vital partners with the power and process industries.
High fuel and energy conversion costs demand that steam turbine efficiency be as much a consideration as reliability. Kessels industrial multi-stage steam turbine line helps you meet a variety of energy requirements in industrial environments. These turbines operate at speeds up to 12,000 RPM, with steam inlet conditions up to 105 bar at 560oC, and exhaust conditions up to 12 bar.
The condensing turbines take high pressure steam, expand it in turbine nozzles and blades, and exhaust it to a condenser at lower than atmospheric pressure. It is principally used when power must be generated with minimum steam consumption. The condensing turbine may also have bleed points (uncontrolled extractions) to satisfy steam e.
These type of turbines find application mainly for power generation where bleed steam is required for feed water heating (hp heater, lp heater and deaerator requirement) and / or where bleed steam is utilized to meet small process demands.
MEGATRO is now offering different types of wind generators with competitive price, which including two types, vertical and horizontal type. It is used of wind energy in the wind farm, Energy Company and other fields.
MEGATRO wind-driven generator, is one kind of electro-mechanical device that can transformed wind energy into the mechanical energy, then again transforms them into the electrical energy. It uses the wind power, gathers them to the battery charging and saves the electrical energy. Besides, it also gather the electrical energy transformation and alternating current supply which voltage and hertz is 220V/50HZ ,110V/60HZ,230V/50HZ.
It has the advantages of no need the fuel and can't produce pollution and noises. And it has high efficiency and good low-speed, the speed regulating system adjusts automatically to wind speed, the whole system is easy to install and convenient to maintain.
It is generally suitable for the areas when the wind resources are rich. And it is widely used in the areas when the electricity is not sufficient or the electrical network is not normal. The main applied fields are as follows: air conditioning refrigerator, the washer, the illumination, the television, the searchlight, the communication equipments, the power tool and others.
Our wind generator' main parameters and sizes are as follows:
1 Machine Pattern: The horizontal (or vertical) axis approaches against the wind
2 Leaf Blade Pattern: Propeller
3 Leaf Blade Number: 3 pieces
4 Wind Wheel Diameter: 2.0 m, 2.5m, 2.6m, 2.8m, 3.2m, 4.0m, 5.0m, 7.0m, 8.0m, 12.0m.
5 Rated Speed: 160----400 revolutions/Minute,
6 Rated Power: 150W, 200W, 300W, 600W, 1000W, 1500W, 2000W, 3000W, 5000W, 10KW, 20KW, 30KW, 50KW
7 Working Voltages: 12V, 24V, 36V, 48V, 60V, 96V, 108V, 220V, 380V, 420V
8 Matches the accumulator cell: 480V,
9 Starting Wind Speed: 3.0 meters/ Second
10 Design Wind Speed: 8~ 9 meters/ Second
11 Operating Region: 3~20 rice/ Second
12 Hand of Rotation: Clockwise (face wind wheel)
13 The Wind cans the utilization factor: 0.4
14 High Speed Ratios: 6: 1 to 8: 1
15 Velocity Modulation Way: Leaning tail + electric brake
16 Sets Up an Altitude: 6-9meters
Place of Origin: Qingdao, Shandong, China.
Availability size: Based on the customer's requirements.
Fabrication: Based on the customer's requirements and other technical data agreed by both parties.
Package: packed with wooden case
Terms of Payment: L/C, T/T
Minimum Order Quantity: 1sets
Port of Loading: Qingdao Port
Delivery Time: one month or based on the customer's needs.
