Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
6060 - 6061
With advanced technology and high accuracy, our products are custom designed to meet the most stringent and specific requirements of customers from different industries. We offer extrusion services for 6060 aluminum alloy and special alloys, with extrusion profiles up to 300 mm in CCD (Circumferential Circle Diameter) and extrusion lengths up to 12 meters.
6063
The products we produce with high accuracy and technology are designed to meet the specific requirements of customers in different industries. We offer extrusion services for 6063 aluminum alloy and special alloys with extrusion profiles up to 300 mm in CCD (Circumferential Circle Diameter) and extrusion lengths up to 12 meters.
6082
The products we produce with high accuracy and technology are designed to meet the specific requirements of customers in different industries. We offer extrusion services for 6082 aluminum alloy and special alloys with extrusion profiles up to 300 mm in CCD (Circumferential Circle Diameter) and extrusion lengths up to 12 meters.
Copper Wire Scrap
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper ETP Content 999
Cu 999
Element0005
Copper9999 Min
Lead0005 Max
Bismuth05 Max
Total impurities03 Max
Copper No 2 kinds of alloy Wire cooper without lines containing impurity contain Copper quantity for 96 minimum content 94
Shall not contain excessive lead and tin change of copper wire welding of copper brass and bronze line excessive oil prohibition and nonmetalcrisp burning line utterly margin of fine copper and excessive sexual yarn Need appropriate means to remove dirt Birch
Shall consist of clean untinned uncoated unalloyed
copper wire and cable not smaller than No 16 B S
wire gauge free of burnt wire which is brittle
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.
Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,
Content
Pb â?¥ 99.99 %
Density
11.34 g / cm 2
Color
Bluish
Weight
35 kgs / lump, 55 kgs / lump
Dimension
21" x 4" x 2.5"
Package
Standard Sea-worthy package, fixed by belt per ton
Shape
Rectangular Lump
Application
lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps
cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil
