1). Size: 25mm*25mm-250mm-250mm
2). Wall thickness: 1.5mm-25mm
3). Length: 1m-12m
4). Grade: Q195, Q235, Q345,SS400,SS540, S235JR, A36 etc
4). Certificate: ISO 9001-2008
5). Packing: Standard exporting package.
6). Delivery: Within 20 days after receiving the deposit.
7). Application: Framework of all kinds of construction and engineering; Construction joint ;Iron tower; Derrick frame ; Building structures, such as beams, bridges, transmission towers, lifting or transporting machines, shipping, industrial boilers ,product according to your needs.
Assortment corresponds to GOST 8509-93. Precision classes:
A - high precision;
B - ordinary precision.
The number of equal flange steel corresponds to flange width, expressed in mm. For example: Angle 25 -flange width 25mm. All other sizes (wall thickness and etc.) according to GOST (shown in the table of GOST book of reference).
Hot-rolled flat bar - the most sought-after type of strip. Distinguish rolled dimensional (length 0.6 and 1.2 m), a multiple of the measured length and unmeasured (length 0.2 - 0.6 m). At the same time, a bar with a thickness of up to 4.5 mm is produced with a width of all sizes provided for by GOST. In accordance with GOST 103-76, the size of this product may vary in the range:length - 2-10m; width - 20 200 mm;thickness - 4 - 40 mm.
The material of manufacture and the range of the round bar in accordance with GOST 2590-2006, where the bar can be made of steel of the following grades: carbon (St3, St20, St35, St45); low alloyed (Steel 40X, Steel 40XH); high-alloyed (08 18 10, 38XH3MA, 40 2 14 17 2 and others), high-speed (U7; U7A; U8A)
Hot-rolled steel channels
This type of channel is produced according to GOST 535-88 with parallel flanges and sloping flanges: 10, 10P and etc. The slope of inner flanges must not exceed 10%. Assortment of the steel hot-rolled channel corresponds to GOST 8240-89. The number of the channel corresponds to its size (distance between the inner flanges) expressed in cm. For example: Channel #10 - distance between the inner flanges equals 10cm. All other parameters: flange width, wall thickness and etc. according to GOST.
Channel that has letter A at the end of the number (14A) is a channel with sloping inner flanges, it means the flanges are wider and hence the weight of each meter is larger than ordinary channel. There are special types of hot-rolled channel:
special channel for automotive industry - GOST 19425-74 (18S, 20S); special channel for wagon production - GOST 5267.1-90 (8W, 14W, 18W).
Thermally strengthened periodically profiled steel rods of the diameter 6-40mm - the so called thermic is used for the construction of strategic reinforced concrete structures, GOST 10884-81. According to the standard this rebar is made out of these types of steel:
AtIII - St (sp, ps);
AtIV, AtIVK - 20GS, 25G2S, 35GS, 28S, 10GS2, 08G2S, 25S2P;
AtV(K and SK) - 20GS, 20GS2, 08G2S, 10GS2, 28S, 25G2S, 35GS, 25S2R, 20HGS2;
AtVII - 30HS2.
I-BEAM- double flanged - this type of products include hot rolled double flanged beams (I-beams), produced according to GOST 535-88.
I-Beams are separated into several types:
I-Beams with parallel flanges
normal (20B, and etc.)
wide flanges (20Sh and etc.)
column (20K and etc.)
I-Beams with sloping edges of flanges
normal (edge slope 6-12%) GOST 8239-89 (â??10, 12, 16 and etc.)
Assortment of such I-Beams corresponds to GOST 8239-89. Special (M and C):
M - for hanging rails (edge slope not more than 12%): 18M, 24M, 30M and etc.;
C - for reinforcement of mine shafts (edge slope not more than 16%): 14S, 20S and etc.
Assortment of such double flanged beams corresponds to GOST 19425-74. The number of the I-beam is its conventional size (height) in cm.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces.
Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%.
The max weight of each pieces is up to 1 ton.
The material can be loaded loose in 20 heavy duty container.
Iron oxide refers to a group of chemical compounds consisting of iron and oxygen atoms, and it comes in various colors, including red, yellow, and black. These compounds are commonly used as pigments in a wide range of applications, from coloring paints, ceramics, and plastics to tinting cosmetics and food products. Red iron oxide (Fe2O3) is often used for its rich, rust-red hue, while yellow iron oxide (Fe2O3�·H2O) provides a vibrant yellow color. Black iron oxide (Fe3O4) is employed as a dark pigment in inks and coatings. Beyond their coloring properties, iron oxides are also used in magnetic materials, catalysts, and as a source of iron in nutritional supplements. The versatility of iron oxide pigments and their ability to add color and functionality to various products make them essential compounds in many industries.
Iron Ore, Manganese Ore,Chrome Ore, Iron Ore Lumps, Iron Ore Fines, Mill Scales, Copper Ore, Lead Ore.
We sell iron ore, iron ore fines, iron ore lumps, hematite iron ore, magnetite iron ore with vairous grades, if you have such demand, pls feel free to contact us.
Iron ore is the source of primary iron for the world's iron and steel industries. It is therefore essential for the production of steel, which in turn is essential to maintain a strong industrial base. Almost all (98%) iron ore is used in steelmaking. Iron ore is mined in about 50 countries. The seven largest of these producing countries account for about three-quarters of total world production. Australia and Brazil together dominate the world's iron ore exports, each having about one-third of total exports
Electro welded wire mesh supply In the forms of rolls or panels, for construction, fences and other industrial uses.
It enjoys the feature of corrosion resistance, compared with plain welded wire mesh. Mainly used as fencing panels or further fabricated into wire partitions, wire container panels, wire baskets, welded wire fences, poultry fences and other welded products.
Type: Electric Wire Mesh
Application: Fence Mesh
Hole Shape: Square
Wire Gauge: 2.0-4.0mm
Processing Service: Bending, Welding, Cutting
Product name: welded wire mesh
Wire diamter: 0.6-5 mm
wire space: 50-300 mm
Surface treatment: galvanized, PVC coated
Width: 500-1500 mm
Length: as request
Factory certification: ISO 9001
Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60
Standard
BS4449,JIS,ASTM/A615
Length
6m,12m
Application
Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container)
Full specification is available on request,
Iron Ore Pellets: Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste. The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more.
Product Type: IRON ORE PELLETS
Fe (T) 64 % Si02 1.150 % Fe0 0.75 Max Ti02 0.021% Al2O3 0.319 % Ca0 1.170 % P 0.032 % S 0.031 % V205 0.004 % Cu 0.057 % N2O 1.290 % Mg0 0.069 % CCS 309 Size 16-19 mm - 7 % 09-16 mm -91 % 06-09 mm 2 % Tumbler Index- for above 6.3 mm 96.2 % - 95 % min Abrasion Index â??for 0.5 mm 3.8 % - 4 % max Sticking Index 950 deg C 20.1 % Bulk Density 2.17 % Compression Strength 270 Kg / Pellet / 150 kg / pellet Fines below 5mm (-) 5 mm 3 % max Reducibility index 55-65 % .
NOTE: Interested parties please contact us with your LOI
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Essential details
Place of Origin:
Austria
Brand Name:
CAST IRON SCRAP
Model Number:
CAST IRON SCRAP
Type:
Rails Scrap
Fe Content:
99
Weight:
50
Fe Content (%):
99
Product name:
CAST IRON SCRAP
Name:
High Grade Cast Iron Scrap
Packing:
Bulk - Bagged
Characteristics:
Oil Drain Valve Mechanism
Cast Iron Scrap:
Iron Electric Motor Scrap
Shape:
Irregularity
Size of Slag:
10-50mm
Cut Size:
0.5 Meters
Supply Ability
Supply Ability
500000 Ton/Tons per Week
Packaging & delivery
Packaging Details
As buyers request
Lead time:
Quantity(tons) 1 - 500 >500
Lead time (days) 14 To be negotiated
Drive innovation in the automotive sector with our 6063 aluminum billets. Designed to meet the stringent requirements of the automotive industry, these billets offer excellent formability and corrosion resistance, making them the go-to choice for manufacturing precision components that enhance vehicle performance.
Explore the strength and lightweight characteristics of our 6063-T6 aluminum billets, tailored for aerospace applications. With a perfect balance of strength and malleability, these billets provide the foundation for manufacturing components that demand high-performance and reliability in the aerospace industry.
Pig feed refers to the nutritional mixture of ingredients specifically formulated to provide essential nutrients to pigs raised for various purposes, such as meat production (pork) or in some cases, as pets or for agricultural work
