CM-8Y semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Its maximize product capacity can reach 1600pcs/h.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Suitable for producing PET plastic containers and bottles from 10 to 2,000mL
* Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Container:
o Material: PET, PP and PE
o Volume: 0.1 to 2L
o Theoretical output 1,200 to 1,600
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5 to 38mm
* Molding:
o Max mold plate dimension (L x W): 350 x 380mm
o Max mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
* Power 17.5kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
CM-12 blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and it is widely used to produce any shape of plastic from PET with neck finishes from 15mm-200mm. Its maximize product capacity can reach 1000pcs/h.
1. Perfect function with economic investment.
2. Small size and compact construction with no space waste.
3. Easy to operate and maintain, operation by one person.
4. Saving power and uneasy to worn out, Adopting new double crank four bars to lock mould, the cross fixed. Providing high pressure blowing system.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
-
Key Specifications/Special Features:
* Widely used to produce various shape of plastic from PET
* With neck finish: 15 to 200mm
* Perfect function with economic investment
* Small size and compact construction with no space waste
* Easy to operate and maintain ,operation by one person
* Saving power and uneasy to worn out
* Adopting new double crank four bars to lock mould, the cross fixed
* Providing high pressure blowing system
* Container:
o Product material: PET, PP, PE
o Volume L: 10-25L (3-5 gallon)
o Theoretical output: 90 to 180 pieces/h
o Preform inner diameter: 15 to 200mm
* Moulding:
o Max mould plate dimensions (L x W): 420 x 500mm
o Max.mould thickness: 40 mm
o Clamping force: 330KN
o Mould opening stroke: 38mm
* Machine size and weight:
o Main machine (L x W x H): 218 x 77 x 196cm
o Main machine weight 1,000kg
o Heater (L x W x H): 237 x 68 x 165cm
o Heater weight: 380kg
* Power: 40kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Suitable for producing PET plastic containers and bottles from 10 to 2,000ml
* Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Container:
o Material: PET, PP and PE
o Volume: 0.1 to 2L
o Theoretical output: 600 to 800 pieces/H
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5-38mm
* Molding:
o Maximum mold plate dimension (L x W): 350 x 380mm
o Maximum mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
o Power: 17.5kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-A2 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 2000pcs/h.
1. Reasonable design, full automatic control, save power and labor. Adopt high quality Components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Material: PET, PP, PE
* Pneumatic part:
o Valve SMC
o Cylinder SMC
* Electric part:
o PLC LG/Mitsubishi
o Operation system LG/Hitech
o Relay OMRON
o Infrared thermometer
o America raytek
* Electrical components adopts CE, UL, CCC approved international advanced high-tech product
* Output depend on bottle design: 1,800 to 2,000
* Body diameter: 20 to 100mm
* Height: 50 to 350mm
* Neck diameter: 15 to 38mm
* Mold cavity to cavity
* Mold thickness: 240mm
* Mold 500 x 500mm
* Electrical source power 380/220V 3 Phase 50/60Hz
* Power: 25kW
* Really use power: 6kW
* Air source:
o LP air compressor 1.0m3 1.0MPa 1 set (7.5kW)
o HP air compressor 0.73 3.0MPa 2 set (each set 11kW)
o Air dryer 1.03 3.0MPa 1 set
o Cooling water: cooling water 10L
o Size (L x W x H): 1,908 x 1,280 x 1,920mm
o Weight: 2,000kg
o Auxiliary equipment
o Pre-form unscrambler is equipped:
* Size (L x W x H): 276 x 106 x 186mm
* Weight: 250kg
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
Intertech Equipment Inc!|s mold involves hot jogger mold and cool jogger mold involving cheap hypodermic injection mold, kick the bucket throwing mold, silicon silicone mold, liquid silicone silicone mold, silicone mold along with add molds. Many molds are 100% stated in Taiwan, made within Taiwan, built in Taiwan in addition to sampling in Taiwan ahead of cargo. Program assistance as well as talking to, challenge progression organizing and the project less expensive working out for mold along with generation investments each project previous to promoting are well given by all of our skilled specialized executive crew to the whole consumer.
1.Size of 1.2738 alloy steel
Diameter(mm):20~600
Length (mm):1000~6000
Plate
Thickness(mm):Max:800
Width (mm):Max:2200
Length (mm):Max:6000
The specification can be customized.
2.Chemical Compositions
C:0.32-0.40 Si:0.20-0.40 Mn:1.10-1.50 P: Max 0.030 S:Max 0.015 Cr:1.70-2.00 Mo:0.25-0.40 Ni:0.85-1.15
3.Similar Grade
GB:3Cr2NiMo AISI:P20+Ni DIN:1.2738
4.Features of 1.2738 steel
(1)Good machineability alloy tool steel..
(2)Excellent polished finish for large section.
(3)Supplied in the hardened and tempered condition ready for machining.
(4)Can be case hardened or nitrided.
5.Application
For high-gloss mold,etching of plastic mold,large injection mold.
6.Min.Order Quantity:5 Ton/Tons Our MOQ is flexible
Supply Capacity:5000 Ton/Tons per Month
or based on the clients' demand
Port:Shenzhen
Payment Terms:L/C,D/P,T/T
7.Packaging & Delivery
In seaworthy packing or based on your order
Shipped in 15 days after payment
8.Special Use:Mold Steel
9.Surface treatment:black/polished/machined
Technology:hot rolled/forged/cold drawn
Heat treatment:annealing/Q+T
Our products overaly a precise plastic molding tool creation, the plastics models to process, car precise module molding tool, precise car electronics product, the nicety is only learn a molding tool, shoot to be like a plastic product. Welcome the public colleague call inside the industry to write us talks,
Place of Origin: Zhejiang, China (Mainland),
Brand Name: Zhilian Mould
Model Number: customized
Shaping Mode: Plastic Injection Mould
Product Material:Steel
Product: plastic pallet mould
Name: Taizhou single faced plastic pallet injection moulding machine
Cavity: Single
Gate: Open gates or valve gates
Mould advantage: Competitive price, Efficient service &on time delivery
Runner system: Hot runner system made by YUDO or made by ZHILIAN MOULD
Manufacturing machine: High-speed CNC, EDM, Wire-line cutting, deep hole drilling machines
Mould life: 550000-1000000shots
We are manufacturers of good quality of plastic bottle caps of all sizes 28mm neck for 1 litre bottles, 25mm flip top caps, 28 mm flip top caps, 25mm seal caps, phenoil bottle caps, juice bottle caps, soda bottle caps and 20 litre bottle caps
We are also manufacturers of animal identification ear tags for all animals with laser numbering
1, product name: 3 phase electric meter case
2, material:abs
3, weight:1232.5g(including terminal block)
4, size: 288.8*172*87mm
5, bottom case is made of abs
6, front cover is made of pc
7, lower cover and data window is made of pc
8, terminal block is made of bakelite
9, including the metal parts
1, plastic bag packing 2, carton box size: 60*33*42 cm 3, 26 pcs/carton box
Mould specifications:
Item:disposable cutlery mold, tableware mould, spoon mould, fork mould, knife mould.
Sort:kitchen ware mould, plastic mould, injection mould.
Summary:
Disposable cutlery mold with standard hardness for cavity and core, usually 718/h13/nak80 steel for cavity and core(or according to customer¡¡¥s designation), high speed injection, fully automatic ejection system, filter design in order to stop waste material come into the mould cavity.
Usee mould services:
(1).Usee mould is good at making all kinds of plastic mould.
(2).Send quotation list in time.
(3).Have really senior technical consultant to help solve mold skill issue.
(4).Follow mould making time, will not delay the delivery time.
(5).High efficiency, competitive price.
(6).Every 5-10 days, usee mould will send customer mould machining process by photo or video.
(7).Usee mould always use good machine to mould processing in order to ensure mould quality!
(8).After-sales services: experienced engineers will provide all-round technical solutions to any problems occurred in customers' mould operation.
(9) usee mould always keep to good quality, sincere attitude, do best jobs. Since usee mould knows nobody want to get bad goods after spending money.
Mould specifications:
(1).Item: plastic chair mould
(2).Sort: plastic mold, injection mould, furniture mould, commodity mould.
Summary:
(1).Mould steel: sc45/p20/718 available
(2).Mould base:sc45, made in china
(1).Usee mould is good at making all kinds of plastic mould.
(2).Send quotation list in time.
(3).Have really senior technical consultant to help solve mold skill issue.
(4).Follow mould making time, will not delay the delivery time.
(5).High efficiency, competitive price.
(6).Every 5-10 days, usee mould will send customer mould machining process by photo or video.
(7).Usee mould always use good machine to mould processing in order to ensure mould quality!
(8).After-sales services: experienced engineers will provide all-round technical solutions to any problems occurred in customers' mould operation.
(9).Usee mould always keep to good quality, sincere attitude, do best jobs. Since usee mould knows nobody want to get bad goods after spending money.
1.Unburned slide plate
To meet the needs of continuous casting and reducing steelmaking costs for small and medium-sized steel plant, we have developed unburned slide gate series products: unburned al-c slide plate, which adopts tabular alumina and high pure graphite, adds in proper amount of additive and antioxidant, uses phenolic resin as binder, pressed by press machine. The unburned al-c plates have the following features: no need to be burned, tar impregnated and distilled, easy processing. This product mainly used in small and medium-sized ladle.
2.Ladle upper nozzle
Adopting tabular alumina, white fused alumina, sintered spinel, flake graphite, antioxidants and phonolic resin to produce the upper nozzle, which has the advantages of thermal shock resistance stability, good oxidation resistance and corrosion resistance, fit for all kinds of ladle.
3.Ladle collector nozzle
Adopting tabular alumina, white fused alumina, bauxite, flake graphite, antioxidants and phenolic resin to produce the collector nozzle, which has the advantages of thermal shock resistance stability, strong corrosion resistance and withstands crushing etc.
Product series
1qc, 2qc, b50/60, b250, flc4200, lqcs60/80, lv50, lv150, lv180, c51, c10-40, safflow, ls50/70/90, s500, and lqvsv series etc.
Technical features:
1. Material: cudhp, cuag0.1, cucrzr.
2. Size:
Round copper tubes: 110~1200 mm .
Square copper tubes: 50*50~ 500*500 mm.
Rectangular copper tubes: (100~500)*650 mm.
Rectangular copper plates: (700~1000)*(300~3800)*(30~70) mm
Beam blank copper plates: (700~1016)*(280~480)*(80~140) mm
Manufactured precisely according to your drawing, and we can provide design & customize for you.
3. Coating: cr, ni-cr, ni-fe, ni-co. Meeting the demand of various customers, customize accept.
4. Taper: single taper, double taper, triple taper, quadruplicate taper, parabolic taper and various kinds of continuous tapers achieved high efficiency copper mould tubes. The taper you need will be custom-made designed by our own design team.
5. Hardness of cu-side: 95 hb min.
Dongguan xiongying precision mold co., ltd is very professional in research, development, manufacturing and service of precision mold components. After several years' strugglement, xiongying has become an oem factory of many craft brothers all over the world. Xiongying has the ability to manufacture all kinds of precision non-standard components; these components are commonly used in precision punch mold, plastic mold, auto mold, medicine mold, computer linker mold and other factory automation components. Our products are mainly sold to china, europe, america, east asia and southeast asia. We are able to make and check customised products according to world-brand standard as well as gb, jis, din and aisi international industrial standard. Products' precision: size tolerace within .001mm, axiality within 0.002mm, roundness within 0.0015mm, surface roughness within ra0.025, straightness within 0.002.
5613 Injection Moulded Products Suppliers
Short on time? Let Injection Moulded Products sellers contact you.
