Standered stainless steel safety doors fabrication detailes:
1.Stainless Steel Safety doors helps to improve Security with less routine maintenance and longer life compared with Wood, FRP, M.S / Galvanized steel Doors.
2.Stainless Steel Doors And Frame has life up to 75 yr.’s.
3.Three Side Safety Door Holding Framing Done with SS 304 “L “Channel. Three Sided Frame Firmly Fastened with Anhor Flash Fastener On Wooden Door Frame with SS 304 Stainless Steel CSK Allen Cap Bolt.
4.Safety Doors Outer Frames and Internal supports Fabricated with Rectangular Tube SS304 Non Magnetic Material.
5.Safety Door internal Panel being fabricated with 3MM Thickness with SS 304 Non Magnetic Material.
6.Mitered and Fully Welded “Seamless “Edges done from both side face of door Panel.
7.Safety Doors Frame Fully Welded With Finished Faces.
8.Safety Doors Prepared with door Silencer on each strike Door section.
9.Mounted Full Mortise Commercial Grade Lock Set And It’s Reinforcements Drilled, Tapped, And Welded with SS 304 Grade Material. For Added Security This Mortise Lock Set Has Four Stage Lock system With Hand Latch. All Cylinder Keys Set Can Not Be Duplicated.
10.Stainless Steel Dead Bolts Mounted For Internally Lock.
11.Each Safety Door Build Up with Small Window Door Opening which is not visible From out Side Since well Reinforced & Fabricated for Homogeneous Look. This window door can be utilized without opening full door for Courier, postage, small item receipts etc. purpose so that with safe intention your Small kid or Old family member can be safe from outsider routine dealers.
12.Each Safety Door Build Up with Concealed Stainless Steel Heavy Duty Bearing Hinges and its Reinforcements Drlled, Tapped, Welded With SS04 Allen Cap Screw, Nuts And Gauges Edge.
13.Safety Doors Bottom, Top And Middle Rectangular Tubes Reinforcement Fully Welded With Finished Frame Faces.
14.Stainless Steel Doors And Frame Water proof.
15.Stainless Steel Doors And Frame Bacteria Resistant.
16.Stainless Steel Doors And Frame Vermin Proof.
17.Stainless Steel Doors And Frame Fire Rated.
18.Steel Craft Engineers cut out the middlemen, Dealers, And Distributers Who mark up those prices to cover additional overheads and profits. Steel Craft Engineers only “sell direct” through professional team who are ready to explain the customization, product specification and tailor our manufacturing to your personalized design from initial concept to detailed drawings and after-delivery Sales Service.
19For after Sales service each Stainless Steel Doors Tagged With engraved with Laser Mark detail such as Our Phone Number, Web Site, Email ID, Address for Feature correspondences Etc.
20Stainless Steel Doors And Frame Door edges, tops and bottoms are fully and continuously TIG welded with stainless steel filament and Polished for a fully seamless and water-tight condition.
21.Pharmaceutical frames have a pencil-thin filet weld on all seams. There are no exposed seams anywhere.
22.Stainless Steel Doors And Frame All hardware/componentry is welded inside to eliminate any visible weld marks.
We would like to introduce ourselves as one of the leading manufacturers of Smart boards which are an alternative to traditional plywood for the first time in India. We are also manufacturing PVC Foam sheets, PVC profiles like Door frames and Flooring. Our smart boards can be used for manufacturing Partitions, Modular Kitchen cabinets, shutters, Tables, Wardrobes, Industrial sections, Furniture especially for bathrooms, Wall paneling, false ceilings, prefabricated houses and for the same we have our customers spread across India.
Our products have multidimensional characteristics like Anti corrosive and rotting, anti-termite, anti-borer, anti-aging, Fireproof, waterproof, quick and easy to install, easy to clean, high impact strength, maintenance free, easy thermoforming, easy to cut route and fasten, Aesthetic value is high as it has superior finish on both sides which makes it easier to Laminate and print, and lastly it has very good insulation properties.
It’s also an ECO FRIENDLY & GREEN PRODUCT as we use a lot of recycled plastics in the same which helps save trees
We make WPC door frames which look like wooden frames only which have the following benefits over natural wood.
-100% water proof
-100% termite proof
-100% borer proof
-100% weather proof (no expansion contraction)
Have a good fire resistance and does not catch flame.
We make the following sizes.
1)For budget housing: Door Frame made from Wood Plastic composite
-Height: 7 ft
-Size: 2.75" x 1.75" (or say 3" x 2")
-Density: 0.90
-Suitable for Door : 30 mm
2) For Mid level housing also suitable for Internal doors: Door frame made from Wood Plastic composite
-Height: 7 ft
-Size: 4" x 2"
-Density: 0.95
-Suitable for Door: 35 mm
3) For Luxury housing also suitable for main doors
-Height: 7 ft
-Size : 5" x 2"
-Density:0.95
-Suitable for door: 40 mm
4) For Hotels and Luxury projects also suitable for main doors
-Height: 7 ft
-Size: 6" x 2"
-Density: 0.95
-Suitable for door: 45 mm
This would be ready to fix door frame. No need to saw.
We can also make sizes as per buyers requirement.
283 Doors Windows Gates Suppliers
Short on time? Let Doors Windows Gates sellers contact you.
Thickness : 45mm to 88mm
Fire Rating : + hr.to 4 hrs.
Standard Sizes : (a) 2400mm*900mm, (b) 3000mm*1000mm
Composition:- Sandwich construction, premium galvanised sheets of 18g. thickness are spot welded on C channel frame. Insulated with armablaze for thermal insulation.
Atmospheric Protection :- All partition's are made from galvanised steel for protection against atmospheric moisture
Installation:- All components are provided in semi-knocked down condition for easy installation.
Finish:-
(a) Matt, super matt and broad texture
(b) Coating of a smooth film of even microns by way of the EPS/EFB system.
(c) Oven baked at 180¦ C to ensure scratch resistance and a lasting finish.
(d) A coat of Zinc chromate or any finish to match your decor.
Standard sizes of the Doors (with frames):- a) 7ft X 3.5ft b) 7ft X 3ft c) 7ft X 2.5ft
Composition of the Door:- Sandwich Construction, premium Galvanised steel sheets of desired thickness are spot welded on C channel frame. Insulated with Polyurethane foam (PUF)/ Polystyrene
Standard sizes of the Doors :- a) 2030mm X 970mm b) 2190mm X 1100mm c) As per your specifications
Composition of the Door:- Glavanised sheets alsong with advance powder coating technology (or any desired laminated finish) provides an out standing hardness & superior finish to the exposed surfaces of the door. Between the two galvanised sheets their lies a super insulation pad.
Our Inspection Plugs / Seals are designed and manufactured in Non-Destructive Testing (NDT) programs on insulated and non-insulated pipes and vessels. These Inspection Plugs consists of an elastomer sleeve and a metal cap with handle, lanyard and locking ring. They are easy to remove & reuse.
Inspection Windows are manufactured in Stainless Steel in 2.5 Inch, 3 Inch and 5 Inch sizes. Other sizes are available on request.
We are a supplier of varies kind of Aluminium & UPVC Windows/Doors & Other Products. Moreover, we also provide design, installation and post-installation services for our extensive product range. Our products are in great demand for usage in construction and real estate development projects for residential and commercial customers.
These uPVC offerings meet the required customer satisfaction levels, safety standards, and corrosion resistance and durability.
Some of our offerings are listed below:
1. Aluminium Windows & Doors
2. uPVC Windows & Doors
3. FRP Doors
4. Fins
5. Grills, Railing and Fencing
6. ACP Structural
7. PVC Ceiling Sheet
8. Automatic Glass Door
Type Of Freezer : Bottom Freezer
Brand : Rudraa Kitchen Equipment
Door Type : double door
Storage Capacity : 700liters
Number Of Doors : 2
No. of Baskets/Shelves : 2
Door Material : Glass Door
Dimension : 48"x24"x72"
Capacity : 700
Model Name/Number : Rudraa pepsi display
Temperature Range -4*
Buy pepsi display fridge online at best price in Mumbai. We have wide range of pepsi display fridge in Refrigerators.Quikr deliver across Mumbai.
Seal is used to prevent the water leakage between fixed glass and sliding door, to be used as side seal.
Developed/Engineered from top quality grade of PVC Extrution.
Durable and Resistant to the extreme change in temperature.
Ideal for usage in shower cubicles for sealing the edges to prevent water leakage.
RoHs Certified
Available for 8mm, 10mm and 12mm Glass.
Available in various lengths: 2.2Mtr., 2.4Mtr. (Can be supplied as per customer's requirement upto 3 meters)
27MM SLIDING Series
Technical Specifications
Maximum Shutter Dimensions 1200mm x 2200mm
Maximum Glass Thickness 18mm
Available in 2 track, 3 track and 4 track frame
Single or Double insulated Glass available
Multi point lock
KPa DG Handle shutter
Flymesh Integration
Hardware Options : A) Concealed Lock Automatic
B) Short Neck Handle C) Metro Handle
