Find Verified Long Grain Rice Suppliers, Manufacturers and Wholesalers

BunderTech International Ltd is an official electronic component distributor specifically engaged in passive components such as capacitors, inductors, resistors for many years. we have served thousands of customers worldwide.

Our Advantages:
1. Direct support from Original Manufacturer
2. Pretty competitive prices with high quality, much cheaper than Avnet,Digikey,Mouser,Arrow.....
3.Quick response,Any problem you can contact us at anytime,we will do our best to satisfy and support you.
4. Prompt delivery system,on time delivery is always our promise to our customers.
5. Never old/Junk stock,all part to be new and continue supply.
6. Six Month warranty for all parts offering.
7. Customization for special specification and requirement is available.



Inner box export carton.

Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.


Roll, box, drum

Applications:
Long distance telephone, catv, data communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct
Burial (with armouring).
Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the
Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical
Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh
Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500n (short term installation); 900n (long term installation)
Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter)
Twist (torsion length): 125 x overall diameter
Working temperature: -20íµ ~ +70íµ (pe sheath)
Storage temperature: -40íµ ~ +70íµ (pe sheath)
Product highlights:
Small diameter and light weight.
Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
Cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
And achieve better flexibility.
íewide operating temperature range.


Roll, box, drum

Main feature:
Nontoxic, nonalcoholic, nanotechnology, environmentally friendly, waterless, long effect disinfectant. It is a requisite for traveling!

Ingredients
The fifth-generation cation compound quaternary ammonium salt, chlorhexidine acetate, plant essence, emollient etc.

Certificate:
This product has been approved by FDA.

Application:
It can kill 99.999% of harmful virus or bacteria that causes disease within 1/2 minute effectively. It can also kill escherichia coli, streptococcus pneumoniae, candida albicans, nterococcus faecalis, proteus mirabilis, salmonella enterica, salmonella typhimurium, pseudomonas aeruginosa, staphylococcus aureus, hiv/aids, hepatitis c virus, herpes simplex virus i and ii, influenza 2a virus, hepatitis b virus, hepatitis a virus, sars virus, h1n1 virus etc. It can be applied not only to civil hand disinfection, but also to hand disinfection for workers who work in the environments with strict requirements on sanitation and lustration rate, such as the aseptic manipulation room of hospital, drug and food.

Direction:
Spray appropriate amount on the palm, then rub two hands. There is no need to wash with water. The effect is for up to 12 hours. A bottle of 30ml can be used for 400 times. A bottle of 50ml can be used for 600 times.

í= Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
í= Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
í= Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
í=Technical Parameters:
íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
íe Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
íe Twist (Torsion Length): 125 x Overall Diameter.
íe Working Temperature: -10íµ ~ +70íµ (PE sheath)
íe Storage Temperature: -20íµ ~ +70íµ (PE sheath)
í= Product Highlights:
íe Small diameter and light weight.
íe The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
íe Compact and flexible construction are especially suitable for indoor installations.
íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
íe LSZH jackets can be offered for indoor application for which flame retardancy is required.
íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
íe Fiber geometry are strictly monitored to ensure superior transmission performance.


roll,box,drum

Metal abrasive

Here belowed is the scope of our products
Steel shot: s70 s110 s130 s170 s230 s280 s330 s390 s460 s550 s660 s780
Steel grit: g10 g12 g14 g16 g18 g25 g40 g50 g80 g120
Steel cut wire shot: 1.0mm 1.2mm, 1.5mm, 2.0mm
Stainless steel cut wire shot, 0.3mm, 0.4mm, 0.5mm, 1.6mm, 0.8mm, 1.0mm
Steel abrasives are used to clean a wide variety of surfaces and parts, for example
De-sanding and cleaning foundry castings
Descaling metal sheet, billets and profiles produced by the steel industry
Surface preparation prior to coating

Steel abrasives are used in the following industries and applications:
Foundries, metal producers, shot peening, surface preparation, general cleaning, granite cutting,
Chemical composition of the products:
C 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%.
Hardness:
Steel shot: 40-60hrc
Steel grit: 42-66hrc
Steel cut wire shot:1.0mm:51-53hrc ; 1.5mm:41-45hrc
Density:
Steel shot: 7.4g/cucm
Steel grit: 7.6g/cucm
Steel cut wire shot:7.8g/cucm
Microstructure: tempered marten site
High strength, long lasting ervin life: cast steel shot and grit: 2000 cycles;
Steel cut wire shot: 2800 cycles.



25kg in one bag, 40bags on one pallet, 20mt for each container

Width:3mm/4mm/6mm/8mm

Color:Single Color/RGB

Working Voltage:DC12V/DC24V

LED Type:3014/3258/2835/5050

Emitting Way:Front Emitting/Side Emitting

Advantage of LED Strip with IC,
1.Each pixel of the three primary colors can achieve 256 brightness,16777216 color full color display, scanning frequency of not less than 400HZ/s
2.Data transmission speeds up to 800Kbps.
3.It can achieve different program, like chasing, fade in&fade out and so on.
4.The color light is highly consistent, the price is competitive.

packed in anti-static bag

About Cellularmega:
(1)Cellularmega is specialized in manufacturing power tool batteries.
(2)Cellularmega products are made with the highest quality materials.Our products are CE certified, tested by manufacturer to match and/or exceed specifications of OEM products.
(3)Cellularmega focus on providing high quality power products and excellent customer service,Looking forward to your support and your positive affirmation.


Advantage:
This Battery is Designed for Makita BL1850 BL1840 BL1830 BL1820 BL1815 LXT-400 194204-5,It is a kind of Lithium-Ion battery,you can carry it anywhere anytime, convenient to use.And it's has no memory effect. Can be charged or discharged as needed without loss of capacity.The functions are the same as the original products
Uses the highest quality cells, safe with rapid-charge technology while providing overcharge and over discharge protection to increase the life of the battery


Products Details:
Cordless Drill Battery for Makita BL1850 18V 5.0Ah Lithium-ion
All items are 100% Brand New in Original Condition guarantee.
Battery Type: A Brand New Li-Ion Rechargeable Battery
Battery Voltage : 18V
Battery Capacity : 5000mAh
Battery Color : Black


Compatibility
MAKITA
194204-5 194205-3 194309-1
BL1815 BL1830 BL1835
LXT400


Fit models
for makita
BCF201 BCF201Z BCL180 BCL180F
BCL180W BCL180Z BCL180 ZW BCL182
BCL182Z BCS550 BCS550F BCS550RFE
BCS550Z BDA350 BDA350F BDA350RFE
BDA350Z BDA351 BDA351RFE BDA351Z
BDF450 BDF451 BDF451RFE BDF451Z
BDF452 BDF452RFE BDF452RHE BDF452SHE
BDF452Z BDF453RHE BDF453SHE BDF453Z
BDF454F BDF454RFE BDF454Z BDF456RFE
BDF456Z BFR550F BFR550L BFR550RFE
BFR550Z BFR750 BFR750F BFR750L
BFR750RFE BFR750Z BFS450 BFS450F
BFS450RFE BFS450Z BFS451RFE BFS451Z
BGA402RFE BGA402Z BGA452 BGA452F
BGA452RFE BGA452Z BGD800 BGD800RFE
BGD800Z BGD801 BGD801RFE BGD801Z
BHP450 BHP451 BHP451RFE BHP451SFE
BHP451Z BHP452 BHP452HW BHP452RFE


Battery Maintenance:
1.Always remove battery pack from your tool when you are assembling parts,making adjustments,cleaning,or when not being used for an extended time.
2.If you don't plan on using the Power Tool Battery for a month or more, store it in a clean, dry, cool place away from heat and metal objects. Ni-Cd, Ni-MH and Li-ion batteries will self-discharge during storage; remember to recharge the batteries before use.
3.Do not leave the battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks.


Warranty:
Cellularmega is committed to providing each customer with satisfactory products and customer service.
All the Cellularmega products are covered by 30 days money back guarantee and 12 month warranty from cellularmega.hk

About Cellularmega:
(1)Cellularmega is specialized in manufacturing power tool batteries.
(2)Cellularmega products are made with the highest quality materials.Our products are CE certified, tested by manufacturer to match and/or exceed specifications of OEM products.
(3)Cellularmega focus on providing high quality power products and excellent customer service,Looking forward to your support and your positive affirmation.


Advantage:
This Battery is Designed for Makita BL1415 BL1430 194066-1 194065-3 Drill,It is a kind of Li-ion battery,you can carry it anywhere anytime, convenient to use.And it's has no memory effect. Can be charged or discharged as needed without loss of capacity.The functions are the same as the original products
Uses the highest quality cells, safe with rapid-charge technology while providing overcharge and over discharge protection to increase the life of the battery


Products Details:
Cell Type:Li-ion
Voltage:14.4V
Weight: 480g~580g
Capacity:1.5Ah~6.0Ah
Application:Power Tools
Warranty:12Months
Cycle time:>500
Packing size:125*90*80mm


Fit models:
Makita BDF343 BDF343H BDF343RH,BDF343SHE,BDF445RHE,BUS142,DF445D,DF445DRH, DF445DSHG DF445DSHX,TD135D,TD135DRH,TD135DSHG,TD135DSHX BHP440RFE BDF440RFE BTW250RFE BTD133RFE.BTD130FRFE BTD135RHE BTS130RFE BGA450RFE BDF444RFE BDF444Z BHP444RFE BHP444Z BDA341RFE BHP343 BDF343 BDF343RHE BDF446 BTD130FZ BTD132RFE BTD132Z BTS130Z BFR540RFE BFS450RFE BCL140Z BHR162Z BHP442Z BML145 BTP130Z BTW250Z BUB142Z BML184 Makita DC18RA DC18RC DC18SC


Replacement Original Battery numbers:
Makita 194558-0,194559-8,BL1415,BL1430


Battery Maintenance:
1.Always remove battery pack from your tool when you are assembling parts,making adjustments,cleaning,or when not being used for an extended time.
2.If you don't plan on using the Power Tool Battery for a month or more, store it in a clean, dry, cool place away from heat and metal objects. Ni-Cd, Ni-MH and Li-ion batteries will self-discharge during storage; remember to recharge the batteries before use.
3.Do not leave the battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks.


Warranty:
Cellularmega is committed to providing each customer with satisfactory products and customer service.
All the Cellularmega products are covered by 30 days money back guarantee and 12 month warranty from cellularmega.hk

Our company is specialized in Desiccated Coconut Medium Grade with high quality and competitive price:
Desiccated Coconut Medium Grade with specification as follow:
- Moisture : 3% max
- FFA (Free fatty acid as) : 0.1-0.15%
- Fat content: 65-69% min
- Size: 3-5mm
- Natural white color of coconut.
- Free from Salmonella and Ecoli.
- Packing:50 kg,25 kg,10 kg/ bag or as customer requirement.
-Quantity : 12 MT/20FT
- Supply period: all year round
Ms. Lily: Email lilyfortunetrade AT163 DOTcom

Our company is specialized in Desiccated Coconut Shred Grade with high quality and competitive price:
Desiccated Coconut Shred Grade with specification as follow:
- Moisture : 3% max
- FFA (Free fatty acid ) : 0.1-0.15%
- Fat content: 65-69% min
- Size: Thickness 0.025-0.044inch,
Length: over 1inch --5-10%
1/2-1inch --10-50%
1/4-1/2inch--20-40%
Below 1/4 inch--20-30%
- Natural white color of coconut.
- Free from Salmonella and Ecoli.
- Packing:50 kg,25 kg,10 kg/ bag or as customer requirement.
-Quantity : 12 MT/20FT
- Supply period: all year round
Ms. Lily: Email lilyfortunetrade AT163 DOTcom