Metal abrasive
Here belowed is the scope of our products
Steel shot: s70 s110 s130 s170 s230 s280 s330 s390 s460 s550 s660 s780
Steel grit: g10 g12 g14 g16 g18 g25 g40 g50 g80 g120
Steel cut wire shot: 1.0mm 1.2mm, 1.5mm, 2.0mm
Stainless steel cut wire shot, 0.3mm, 0.4mm, 0.5mm, 1.6mm, 0.8mm, 1.0mm
Steel abrasives are used to clean a wide variety of surfaces and parts, for example
De-sanding and cleaning foundry castings
Descaling metal sheet, billets and profiles produced by the steel industry
Surface preparation prior to coating
Steel abrasives are used in the following industries and applications:
Foundries, metal producers, shot peening, surface preparation, general cleaning, granite cutting,
Chemical composition of the products:
C 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%.
Hardness:
Steel shot: 40-60hrc
Steel grit: 42-66hrc
Steel cut wire shot:1.0mm:51-53hrc ; 1.5mm:41-45hrc
Density:
Steel shot: 7.4g/cucm
Steel grit: 7.6g/cucm
Steel cut wire shot:7.8g/cucm
Microstructure: tempered marten site
High strength, long lasting ervin life: cast steel shot and grit: 2000 cycles;
Steel cut wire shot: 2800 cycles.
25kg in one bag, 40bags on one pallet, 20mt for each container
