The plastic package carries Underwriters laboratory
Flammability Classification 94V-0
For surface mounted applications
Low reverse leakage
Built-in strain relief ideal for automated placement
High forward surge current capability
High temperature soldering guaranteed:
250/10 seconds at terminals
Case: JEDEC DO-214AC molded plastic body
Packaging: Tape and Reel
MPQ: 5Kpcs/reel or 7.5Kpcs/reel
2-3 weeks delivery + with regular stock
Kingtronics own brand KINGTRONICS¡±
Packaging: Tape&reel
Very attractive prices from original manufacturer.
Main feature:
Nontoxic, nonalcoholic, nanotechnology, environmentally friendly, waterless, long effect disinfectant. It is a requisite for traveling!
Ingredients
The fifth-generation cation compound quaternary ammonium salt, chlorhexidine acetate, plant essence, emollient etc.
Certificate:
This product has been approved by FDA.
Application:
It can kill 99.999% of harmful virus or bacteria that causes disease within 1/2 minute effectively. It can also kill escherichia coli, streptococcus pneumoniae, candida albicans, nterococcus faecalis, proteus mirabilis, salmonella enterica, salmonella typhimurium, pseudomonas aeruginosa, staphylococcus aureus, hiv/aids, hepatitis c virus, herpes simplex virus i and ii, influenza 2a virus, hepatitis b virus, hepatitis a virus, sars virus, h1n1 virus etc. It can be applied not only to civil hand disinfection, but also to hand disinfection for workers who work in the environments with strict requirements on sanitation and lustration rate, such as the aseptic manipulation room of hospital, drug and food.
Direction:
Spray appropriate amount on the palm, then rub two hands. There is no need to wash with water. The effect is for up to 12 hours. A bottle of 30ml can be used for 400 times. A bottle of 50ml can be used for 600 times.
Product Property:
Molecular formula: Zn
Molecular Weight: 65.38
Physical Property: light grey metal fine powder.
Density: 7.14g/cm3
Melting Point: 419.4¡ãC
Boiling Point: 908%
Chemical property: insoluble in water, soluble in acid and alkali, slowly soluble in acetic acid, ammonia water, it has strong reducing performance and give out hydrogen. Lumps when being wet, keeps stable in dry air and generates white basic carbonate covering in its surface in wet air. When combusting in the air, it can generate blue green flame and generate zinc oxide. High pure zinc act slowly with sulfuric acid and nitric acid, while act fast when it contains few of other metals such as steel, tin and lead.
This cable is based on new technology that gives you -
the best data transmission between your HDMI source and-
HDMI display unit. The five transmission pairs are with-
identical electrical characteristics that provides-
the best data transmission between devices.
Triple shielded cable with durable connectors has-
the best performance in maximize the data signal integrity,
EMS and worst installation environment.
With the ATC certification,
this cable is fully fulfilling the requirements and up to-
standard of HDMI organization.
All materials of the cable are 100% RoHS compliant and-
lead-free to protect our planet.
Features:
1íóHDMI Ethernet Channel ¿C Adds high-speed networking to an HDMI link,
allowing you to take full advantage of their IP-enabled devices without-
a separate Ethernet cable.
2íóAudio Return Channel ¿C Allows an HDMI-connected TV with-
a built-in tuner to send audio data "upstream" to a surround audio system,
eliminating the need for a separate audio cable.
3íóSupports 3D ¿C Defines input/output protocols for major 3D video formats,
paving the way for true 3D gaming and 3D home theater applications.
4íóSupports 4000X2000 Resolution ¿C
Enables video resolutions far beyond 1080p,
supporting next-generation displays that-
will rival the Digital Cinema systems used in many-
commercial movie theatres.
5íóAdditional Color Spaces ¿C
Adds support for additional color models used in-
digital photographyand computer graphics
Here belowed is the scope of our products
Steel shot: s70 s110 s130 s170 s230 s280 s330 s390 s460 s550 s660 s780
Steel grit: g10 g12 g14 g16 g18 g25 g40 g50 g80 g120
Steel cut wire shot: 1.0mm 1.2mm, 1.5mm, 2.0mm
Stainless steel cut wire shot, 0.3mm, 0.4mm, 0.5mm, 1.6mm, 0.8mm, 1.0mm
Steel abrasives are used to clean a wide variety of surfaces and parts, for example
De-sanding and cleaning foundry castings
Descaling metal sheet, billets and profiles produced by the steel industry
Surface preparation prior to coating
Steel abrasives are used in the following industries and applications:
Foundries, metal producers, shot peening, surface preparation, general cleaning, granite cutting,
Chemical composition of the products:
C 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%.
Hardness:
Steel shot: 40-60hrc
Steel grit: 42-66hrc
Steel cut wire shot:1.0mm:51-53hrc ; 1.5mm:41-45hrc
Density:
Steel shot: 7.4g/cucm
Steel grit: 7.6g/cucm
Steel cut wire shot:7.8g/cucm
Microstructure: tempered marten site
High strength, long lasting ervin life: cast steel shot and grit: 2000 cycles;
Steel cut wire shot: 2800 cycles.
25kg in one bag, 40bags on one pallet, 20mt for each container
í= Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
í= Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
í= Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
í=Technical Parameters:
íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
íe Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
íe Twist (Torsion Length): 125 x Overall Diameter.
íe Working Temperature: -10íµ ~ +70íµ (PE sheath)
íe Storage Temperature: -20íµ ~ +70íµ (PE sheath)
í= Product Highlights:
íe Small diameter and light weight.
íe The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
íe Compact and flexible construction are especially suitable for indoor installations.
íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
íe LSZH jackets can be offered for indoor application for which flame retardancy is required.
íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
íe Fiber geometry are strictly monitored to ensure superior transmission performance.
