Find Verified Heat Exchangers Suppliers, Manufacturers and Wholesalers

GEA Varitherm VT-20 Plate Heat exchanger is made of several Varitherm-design stainless steel plates which are combined to form one effective heat transfer unit. Within each plate package the heat exchanger plates support each other at the metal-on-metal profile cross points, which ensure the stable behavior of the plate gap. The plate gasket has so called glue less sealing system. VT-20 is specially designed for cooling and heating of fluids with particle content up to a particle size of 2 mm as well as condensation of vapors, gas cooling and gas dehumidifying. This unit is in good operational condition.

Manufacturer: GEA Ecoflex GmbH
Type: VT 20 BC-12
Serial no: 170/12982
Year of manufacture: 2000
Frame material: Stainless Steel AISI 4571
Plate material: Stainless Steel
Max. operating pressure: 16 Bars
Max. operating temp. 100 C
Max flow volume: 90 m3/h
Width: 337 mm
Length: 999 mm.

Manufacturer: GEA Ecoflex GmbH
Type: VT 20 BC-12
Serial no: 170/12982
Year of manufacture: 2000
Frame material: Stainless Steel AISI 4571
Plate material: Stainless Steel
Max. operating pressure: 16 Bars
Max. operating temp. 100 C
Max flow volume: 90 m3/h
Width (plates) 337 mm
Length (plates): 1370 mm.

Working Temperature - +200'C ~ - 200'C
Max Pressure - up to 45 Bar
Thickness - 0.3 mm
SS316L, Cu - 99%; SS304 - optional

We produce shell and tube heat exchangers from carbon or stainless steel.

Heat exchangers are thermal machines where the heat from one media is transferred to another. In practice, they are used for cooling oil, for steam condensation in central heating systems and as boilers for hot tap water. The heat exchangers can be made from steel or stainless steel. The pipes inside the heat exchanger are according to the TIG welding procedure welded to the flange of the heat exchanger.

The heat exchangers are produced in various types: U-shaped, helical, with even pipes, conducting several parallel currents through the heat exchanger.

Plate Heat Exchangers as well as plates and gaskets separately.
Our models are similar to those of Sondex and Funke companies.
ARES offers PHE models: A1S, A1L, A2S, A2L, A3S, A4A, A6S, A6M, A8S, A8L, A12S

Ltd Spetspromenergo-1, Ukraine produce and sell heaters (heaters) water of all sizes and tiering. Heating medium - hot water warmed to 200 ° C and operating pressure up to 1.2 MPa.

Ltd Spetspromenergo-1, Ukraine produce and sell heaters (heaters) Steam, of all sizes, and tiering. Heating medium - steam of 200 ° C and an operating pressure of 1.2 MPa.

we are manufacturer of custom severe/heavy duty all stainless steel ,carbon ...etc biggest heat excahngers .

Model: 504
Width(mm): 200
Height(mm): 480
Length(min-max): 200-400
Horizontal port distance(mm): 70
Vertical port distance(mm): 381
Max. Working pressure(bar): 20
Test pressure(bar): 25
Weight(kg): 23+0.25n
Connection diameter: 1 1/4” thread

Width(mm): 200
Height(mm): 480
Length(min-max): 200-400

Ltd Spetspromenergo-1, Ukraine produce and sell Finned Tubes. Finned tube has been successfully used in heat exchangers: heat exchanger, heat recovery boilers heaters, economizers, heaters, air-cooled condensers, product coil heating furnaces, heating batteries.

Ltd Spetspromenergo-1, Ukraine produce and sell Finned Tubes. Finned tube has been successfully used in heat exchangers: heat exchanger, heat recovery boilers heaters, economizers, heaters, air-cooled condensers, product coil heating furnaces, heating batteries.

Heat sinks (Heat exchangers) for LED headlights in different shapes.

A recuperator is a device which makes additional use of the energy of exhaust gases, which would otherwise be lost through the chimney. In practice the recuperator is a heater, which is installed between the boiler and the chimney. The waste exhaust gases at a temperature of 220° C are conducted through the recuperator and keep heating the supply water of the steam boiler or feedback water of a hot-water boiler. Consequentially the exhaust gases cool off, while the supply or feedback water is additionally heated, which means approximately 5 % of additional efficiency for recuperators of type I totalling to 95 % (applies to steam boilers).

Recuperators of type I are made of steel, while additionally a stainless steel recuperator of type II can be integrated, which brings approximately another 3 % of savings totalling to 98 % (applies to steam boilers).

These hydraulic parts are used in automotive and energy industry. We make mass production such as 60k-80k a month.

Depends on the order quantity

Venco heat recovery units (vhr) are designed for saving energy and also improving indoor air quality. Vhr units provide the facilities of air-conditioning applications (residential, commercial and industrial areas) by using the plate type heat exchangers that recover the heat. The heat is transferred from warm air to cold air by the exchangers with high conductivity, efficiency and performance. The unit could be equipped with the accessories; duct type electrical heater, hot water coil, silencer, high efficiency filter, by-pass kit, carbon dioxide or air quality sensor.

Cartoon box and pallet

Heat Pump Heat Recovery Ventilation Units with heat pump, designed for saving energy and also improving indoor air quality. VHR DX Units provide heat recovery and well conditioned fresh air by air to air plate type exchangers and heat pump. 30 ¦C fresh air in the summer time and 12¦C fresh air in the winter time can be obtained by usual heat recovery units, but these results are not comfortable. You can obtain 20¦C fresh air in the winter time with high efficiency heat pump.

Cartoon Box and Pallet