The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Raw materials - Birch and pine sawdust mix
Dimensions - Length - 300 mm +-15 mm, Diameter - 90 mm +5 mm
Humidity - 8.4 %
Ash content - 0.72 %
Calorific value - 18,87 - 20,02 MJ/kg
Raw materials - Birch and pine sawdust mix
Dimensions - Length - 300 mm +-15 mm, Diameter - 90 mm +5 mm
Humidity - 8.4 %
Ash content - 0.72 %
Calorific value - 18,87 - 20,02 MJ/kg
Combusting temperature: 4200Kcal/kg
Moisture: around 10%
Ash content : around 4%
Mechanical durability: 95%
Partly destroyed briquettes:14%
Size : 155 x 110 x 65 mm
Combusting temperature: 4200Kcal/kg
Moisture: around 10%
Ash content : around 4%
Mechanical durability: 95%
Partly destroyed briquettes:14%
Size : 155 x 110 x 65 mm
Colour Light brown to tan.
Flavour & Odour Aromatic pleasant flavour and aroma, typical of coriander, free from any objectionable taints.
Moisture - 12.0% maximum
Total Ash - 6.0% minimum
Acid Insoluble Ash - 1.0% maximum
Volatile Oil - 0.3% minimum
Bulk Index - 60 - 85g / 250mL
Water Activity - 0.69 maximum
Extraneous Matter - 0.75% w/w maximum (ASTA 14.0)
MICROBIOLOGICAL:
E.coli Not detected in 1g
Salmonella Not detected in 25g
154 Fly Ash Bricks Suppliers
Short on time? Let Fly Ash Bricks sellers contact you.
