Find Verified Electric Water Heaters Suppliers, Manufacturers and Wholesalers

The boiler is a three-pass, fire-tube steam boiler made by Finnish Ahlström Themoflow in year 1990. The boiler has max operating pressure16 bar with 205 C steam temperature and it is equipped with exhaust gas economizer for preheating incoming feed-water and modulating heavy fuel oil burner. It's has a large 15.2 m3 water volume which allows big momentary changes in load. Other benefits include simple structure, long operating life, reliability and ease of service and maintenance. The boiler is in good operational condition. Feed water pumps and feed water tank with aerator are available for separate request and price.

Technical Data:
Manufacturer: Ahlström Thermoflow, Kaarina
Manufacturing year: 1990
Capacity: 3.3 MW
Water volume: 15.2 m3
Steam characteristics: Max 16 bar, at 205 C temperature, saturated
Oil Burner: Weishaupt Monarch RMS 50/2 A - ZM (YOC 1990)
Oil feeding: 140 - 490 kg/h.

Very little operated (ony 6000 hours totally!) fuel oil fired package boiler made by Högfors (nowadays Foster Wheeler) in 1988. Complete plant with combustion air fan and feed water pumps for immediate delivery, in very good condition.

Main scope of the delivery:
- Högfors 30 t/h boiler
- Oilon burner
- Economizer
- Combustion air fan
- 2 pcs of 90 kW / 25 bar KSB feed water pumps
- Fuel oil pumping unit made by Oilon
- 8 pcs of steam shoot blowers
- valves, fittings and maintenance supports .

Type of boiler Water tube type with natural circulation, with two drums
Manufacturer Kymin Osakeyhtiö, Högfors, Finland (Foster Wheeler)
Model of the boiler: H52-47-25 bar
Year of manufacturing 1980
Starting day of operation 16.11.1980
Evaporation 47 t/h saturated steam
Temperature of steam 226 oC
Effect 30 MW
Structural pressure 25 bar
Feed water temperature 120 oC

Furnace volume 74,5 m3
Surface of furnace c. 136 m2
Surface of convection part 420 m2
Surface of economizer c. 504 m2
Water volume 15,8 m3

Oil Heavy oil (POR 230)
Oil burner Saacke SKV, fully automatic, modulating
Regulating area of burner 610-3050 kg/h
Oil pumping- and pre- Oilon Osva 4000 kg/h
heating station
Feed water pumps 2 pcs + 1 pc as spare.
KSB-centrifugal pump MOVI 65/6,
massflow 59 t/h, 29,5 bar
motor 90 kW, 2900 r/min
Primary air fan Mercantile KDER 75, 37300 Nm3/h, motor 115 kW, 1500 r/min
Sootblowers Diamond Superior sootblowers 4 pcs in boiler part
Diamond Superior sootblowers 4 pcs in economizer.

Dimensions of boiler part: Height 5,2 m, Width c. 4,5 m, Length 10,0 m
Weight of boiler part c. 54 t. without water and accessories
Weight of economizer c. 15 t. without water and accessories
Boiler is suitable for gas operation by changing the burner.
The boiler has been in operation only about 6.000 hours.
Equipment for SaleGeneral Industry Textile Machinery Process Equipment Energy & Power
Gas & HFO Boilers Wind Turbines.

Yogurt production and packaging line 4000 l / shift

0732010 Yogurt production and packaging line 4000 l / shift

Yogurt production equipment consists of 4 pcs 1000 liters of yogurt fermentation tanks, transmission equipment and a fully automated filling line 150 - 200 grams plastic cups. Process operation requires two people and equipment can be made about 4000 liters (or 20000 pieses) of 200g canned yogurt cups or other similar product for a normal 8-hour working shift. Packaging equipment is manufactured in the 1980s by German Ganzhorn & Stirm (nowadays Casti) and an automatic product cup feeder has been added later on the line. Also the tray feeding device has been recently added. The production line is fully operational and suitable besides for yogurt production, also for all curdled / fermented milk packaging in 150g-200g cups.

Fermentation tanks are double walled 1000 liter stainless steel vertical tanks. The product temperature can be adjusted as desired (e.g.36C) by using heating water between double walls. Control valves are manually adjusted.

The fermented yogurt is transferred to two 100 liter feeding tanks of the packing line with gentle rotary lobe pumps. Filling the yogurt cups is fully automated 2-lane packing process. The main equipment are manufactures by German Canzhorn & Srimin. Later installed automatic cup feeding equipment places 150 gr - 200 gr cups in 2 rows on the filling machine. The filling machine fills cups in three phases; first to the bottom desired volume of jam and then two different layers of product mass. ( 3-layer of yogurt). The cups are closed with aluminum lids which is sealed with electric heater. Transfer conveyor moves closed cups on to a palletizing machine which loads 20 cups on each cardboard or plastic tray (tray is automatically fed by a tray feeding device) where full trays are moved to a stacker machine which piles several layers of trays (up to 1 meter tall) for transportation.

Technical Specifications:
The manufacturer: Ganzhorn & Stirm (Casti)
Filling machine type: DOGatherm 61
Stacker type: BE 75/2
Production capacity: up to 4000 liters / shift
Yogurt fermentation tanks: 4 x 1000 liters
Cups & filling: 150 - 200 g / max. 3-layer filling
Filling line length: about 12 meters.

Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery

We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets.

More information on requests, for spam protection please introduce yourself properly.

Main data of one mill:
Manufacture’s type: NTK 130F/LM
Year of manufacture 1988
Total operating hours: approx. 75000
Rated capacity, max: 145 kW
Number of blades: 3 pcs
Rotor diameter: 22 m
Rotor speed: 44.5 rpm
Cut-in wind speed: 4.0 m/sec
Cut-out wind speed: 53 m/sec (120 mph)
Hub height: 26 m
Generator: ASEA 145 kW / 1500 rpm / 50 Hz
Blade type: LM 9.7 m H/H/T diam. 21 m
Gear box type: Lohman & Stolterfort GPC 145
Clutch type: Lohr & Brokamp Universal Joint No 105
Total weight: 15200 kg.

Modem

External basic ADSL modem for single computers. Connection to PC is USB. ull rate speed support up to 8MBps
The modems are ANNEX A type and there is support for
major protocols: G.DMT, T1.413, PPPoA, PPPoE, T1.483
Issue 2
G.992.1, G992.2.

9x/Me/NT/2000/XP.
Qty: 7000 pcs in-stock
Brand new, bulk packed (20 in box)
Warranty 1 year
Price $7 each , or make offer to take all
FOB Helsinki , Finland


Bulk, 20 pcs in a box

The main description of the plant equipmet is:

1. Brew House Make & Capacity:
Steinecker1995 -1999
5 brews/d, 450-500 hl/brew. for 7000 kg malt, 3850 Raw grain
Cast-out quantity: 500 hl, 16,5° Plato
8 Brews/ 24 hours, annual capacity 0.85 Mhl
Controls are based on Siemens S5 and S7 PCS with, Botec Control system, PC Windows 2000 (Steinecker)
Laboratory yield = 97.1% (2.1.09 – 28.5.09, 837 brews)

The Brewhouse was installed in 1996 - 1999 by Steinecker to a high standard of control and automation and it contains the following main equipment:

Wet Conditioning Mill, capacity 20 tons/hour and it is fully overhauled 2008

Configuration, main characteristics:
1 wet mill plant: 20 t/h
1 mash tun kettle plant: V=550 hl
1 lauter tun plant: D=7200mm
1 weak wort tank: V=155 hl
1 pre run vessel: V=640 hl
1 CIP- water distributor
brew/whirpool kettle hot wort max. 520 hl (1 brew / 5 hours)
wort cooling 400 hl/h, 10°C

- Mash Kettle, a jacketed vessel 550 hl
- Enzyme Dosing pot and pump
- Lauter Tun complete with spent grain tank and Pondorff pneumatic grains transfer. Tun capacity 814 Hl and diameter 7200 mm, Solids capacity of 7000 kg malt and 3850 kg raw grain. Complete with internal rakes and scrapers
- Pre Run Vessel complete with internal heater , volume 640 hl
- Wort Boiler/ Whirlpool, gross volume 757 hl net 520 hl
- Wort Cooler with aeration – GEA supplied plate heat exchanger (YOM 1990) – rated at 450 Hl/hr cooling the wort from 95oC down to less than 10oC. Cooling achieved with brewing water and then chilled water. Aeration achieved by use of a sintered disc and static mixers, and controlled manually using mass flow meters
- 2 Hop Pellet Tanks
- 2 Hop Oil Tanks
- Brewhouse Weak Wort Tank, volume 150 hl
- Alfa-Laval Decanter, year 2008, capacity 100 hl / h
- 2 Weak Wort Tanks, volume approx 80 hl each
- Gypsum Tank, volume approx 40 hl
- Wet starch tank – volume 100 hl
- Spent Grains Silo
- Spent Grains Drying System
- Bulk Acid tank – plastic tank with integral bund and dosing pumps

Manufacturer pompetravaini italy, made in year 2002. Vacuum pump is two staged rotating pump with externally located, grease lubricated bearings. Pump is liquid ring type designed for water sealed operation. The impeller and shaft are made of stainless steel (aisi 316), cast iron casing and manifold normal steel. The shaft is sealed with double mechanical seal. Pump is provided with connections for service water and draining. Pump includes also anticavitation valve. Pump is dismantled from its base frame but the delivery includes original electric motor eex classified abb hyr 200m lb 4 30 kw, 1476 rpm, year 1995. The equipment will be supplied loose - not as a skid.

Technical data:trch 80 - 540/c2/ra
Max suction pressure:25 mbar (till 300mbar)
Max capacity:540 m3/h (min 400 m3/h)
Flanges:80 mm
Rotation speed:1500 rpm
Power requirement:30 kw at 1500 rpm
Year made:2002
Condition:fully operational

Compressor single stage, standard speed oil-injected rotary screw compressor with manufactured by German company Drucklufttechnik GmbH in year 2002. The complete unit consists of intermediate pressure vessel and Ultratroc - air dryer all delivered same time as the compressor. The unit is controlled by modern DELCOS 3000 control unit. The total unit has 30320 operating hours, the unit has been regularly serviced by a compressor service company and is in good operational condition. The compressor is single-stage, double screw, V-belt driven electric motor drive compressor which has oil cooler and thermostat controlled water - air after cooler on discharge of the pressurized air. The operations were stopped in year 2006 but the compressor and other equipment are still installed and ready for test run.

Technical data:
Compressor type:CompAir L90 7,5A
Capacity:16.1 m3/min, 7.5 bar
Comp. electric motor:90 kW - 400/415 V û 50 Hz
Air cooler electric motor:3.0 kW - 400/415 V û 50 Hz
Compressor weight:2380 kg
Compressor dimensions:2.4 x 1.4 x 2.0 m (W x L x H)
Air dryer type:Ultratroc SD 1350 û type 422
Air dryer air volume:22.5 m3/min
Total power requirement of dryer:2.4 kW
DryerÆs refrigerant:Type R134 a û filling 3.5 kg
DryerÆs dimensions:1200x900x800 mm, weight 185 kg
Int. mediate air pressure vessel:Volume 2 m3, 10 bar, made by Galvanoimis Oy.

The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit.

Operation principle:
Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency.

Technical data:
Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden
Type: ECO 5000 VS-HP, R407C
Year made: 2003
Evaporation capacity: 5000 liters / 24 hour (pure water)
Electricity consump.: about 0,15 kWh / liter pure wateri)
Control unit: Siemens Micromaster 420
Compressor: Bitzer Kuhlmachinenbau GmbH,
Compressor type: 6G-40,2
Compressor capacity: 126.8 m3/h, 19/28 bar
Refrigenerant: R 407 C
Main dimensions: 2.8 m x 1.3 m x 2.9 m
Weight: 1500 kg.

Plasmatreat FG1002 pre-treatment and cleaning unit
This flat surface pre-treatment and cleaning unit with open air / atmospheric-pressure plasma technology was originally made by Plasmatreat company in 2004, manufacturer's model FG1002 with Siemens PLC control system and then in year 2008 it was refurbished with new plasma nozzle directing robot and an aluminium profile structured operation table. The unit has two plasma nozzles and it has been used on occasionally and is in excellent condition. The equipment has CE marking and proper documentation, including wirering diagrams
This machine is designed to pre-treat and clean any metal, aluminum, plastics (such as PP and EPDM) or glass surface free from grease, dust and other unwanted materials and to pre-treat material surface for ensuring the adhesion of surface coating to these materials. Plasmatreat process also allows to use environmentally friendly water-based painting for coating and due to the fact that cleaning with plasma is a dry process immediate further processing of the materials is possible.
For more information, please visit manufacturer's web page www.plasmatreat.de

Technical information:
Manufacturer:Plasmatreat Company
Model:Plasmatreat Openair® FG 1002
Serial number:695
Year of manufacturing:2004 / 2008
Operation table size:1600 x 3000 mm
Electricity connection:3~/ 400V / 32 A
Condition:Used, excellent.

Stainless Steel Tank 3.5 m3, with variator driven mixer

3pcs excellent condition vertical stainless steel (food quality) tanks with electric motor driven and mechanical variotor speed controlled heavy duty two plade mixer.
The tanks are made by Finnish Tankki Oy in 1992, they have are standing on 3 heavy legs, liguid volume 3.5 m3, conical bottom for easy discharge. Necessary service man door and other connections for venting, filling and discharging.

Total height: 3.4 m (+ motor and connections 50 cm)
Diameter of the tank: 1.6 m
Wall height: 1.8
Mixer: Sew-Eurodrive KAF76-D34
Mixer rpm: 12.2 - 60 rpm
Moment: 900 - 400 Nm
Electric motor 3.0 kW / 1400 rpm.

Good condition GEA Westfalia centrifugal separator used for molasses removal from fermented beer. The equipment has patented HydroStop solid discharged system that can be adjusted precisely and reproducibly to the specific solids concentration requirements of the process. This beer separator has continuous and self cleaning separation process and in beer filtration application this separator eliminates the need to use kieselghur.

Technical information:

Manufacturer: - GEA Westfalia Germany
Year of manufacturing: - 2002
Manufacturer's type: - SC 30-06-177
Capacity: - 4000 - 6000 liters / hour
Electric drive: - 18.5 kW
Bowl diameter: - 440 mm
Bowl speed: - 7270 rpm
Relative density of solids removed: min 1.4 kg/l
Relative density of suspension: max 1.2 kg/l
Particle size or removed solids: > 4.6 micron
Centrifugable solids: - max 5% v/v
Viscosity of free liquid: - 2.5 - 5.5

ELMO-G Blower - Vacuum pump 1000 m3/h

The blowers are made by German ELMO Vacuum Technology GmbH, a Siemens company in year 2002 and they are single stage, gas ring type. The vacuum pumps are in good operational condition. We have three identical pump units and originally the pumps were in dust suction operation and therefore the delivery includes 3 pcs high efficiency cyclone type dust filter with electric discharge vibrators. Motor speed is controlled with individual inverters. Units can be sold separately.

ELMO-G vacuum pumps can be used for suction operation or as compressors in pneumatic transportation system. They have side-channel principle using gas ring as a sealing and the gas flows through the compressor along a helical trajectory and is repeatedly accelerated and thereby repeatedly compressed according to the required operating point. The blowers are oil-free and thus suitable for various applications. The blowersÆ have both suction and discharge noise silencer. For pump curves, both in suction and compression, as well as additional information please contact us.

Technical Data:
Manufacturer's type:ELMO 2BH1943-1GC36
Year of manufacture:2002
Suction capacity with max vacuum:16,7 m3/min (50Hz)
Suction capacity with max discharge pressure:21,5 m3/min (50Hz)
Max pressure difference in vacuum operation:0,30 bar (50 Hz)
Max pressure difference in compression operation:0,35 bar (50 Hz)
Inverter:Danfors VTL 6000 HVAC
Blower's rotation speed2920 rpm / 50 Hz and 3520 rpm / 60 Hz
Electric motor (Siemens):50 Hz: 21.0 kW û 300/690V û 39.5 / 23.0 A
60 Hz: 24.2 kW û 460 V û 41.0 A
Protection class:IP 54.

Kills 99.9% of all known germs instantly, no water required, quick drying
Provides rapid anti-microbial kill of a wide-range of micro-organisms
A superior alternative to hand-soap, as proven by medical research
Specially formulated with Aloe Vera ensuring hands are refreshed and moisturized
Tested in accordance with British and European Standards BSEN1040:2005
Medical Grade Antiseptic Disinfectant Hand Sanitizer

Waterproof Plasterboard technical parameters

Standards (GB/T9775-1999)

Water Proof Gypsum Plasterboard-specifications
Dimension(mm)
depth: 9.5, 12, 15,
width:1200, 1200, 1200,
legnth:3000, 3000, 3000,
weight(kg/m2):8.3,9.7,12.6,
Simple packing specification
No.s: 100,80,60,
area(m2):360,288,216,
weight(ton):3.08,2.90,2.86,
Standard of loading
No.s:76,60,50,
area(m2):273.6,216,180,
weight(ton):2.42,2.27.2.50