Spruce timber - commonly also known under its latin name "Picea Abies" is widely distributed throughout continental Europe and is a timber tree of major economic importance. The large tree usually has a straight, cylindrical trunk and growns to a height of about 30 m (up to 55 m), with a large diameter of about 60 cm (up to 1,5m).
Big sizes - beams:
Thickness - from 100 up to 300 mm
Width - from 100 up to 300 mm
Length - 3000/4000/5000 mm
Small size - beams:
Thickness - from 40 up to 95 mm
Width - from 60 up to 95 mm
Length - 3000/4000/5000 mm
Boards:
Thickness - from 18 up to 50 mm
Width - from 50 up to 250 mm
Length - 3000/4000/5000 mm
Pine timber - also referred to redwood timber, commonly also known under its latin name "Pinus Sylvetris" is the most widely spread in the East European Countries. The tree is generally 30m high with a diameter of about 1m but larger trees may be found on favorable sites.
Big sizes - beams
Thickness - from 100 mm up to 300 mm
Width - from 100 mm up to 300 mm
Length - from 3000 mm up to 5400 mm
Small sizes - beams
Thickness - from 40 mm up to 95 mm
Width - from 60 mm up to 95 mm
Length - from 3000 mm up to 5400 mm
Boards
Big sizes - beams
Thickness - from 20 mm up to 50 mm
Width - from 50 mm up to 200 mm
Length - from 3000 mm up to 5400 mm
Beech timber - commonly also known under its Latin name "Fagus sylvatica" is the one most widely spread in the Romanian Carpathian Mountains, belonging thus to the only unpolluted forest area in Europe.
TASS - SUPER SHORT
Thickness - 25/32/38/50 mm
Width - from 80 mm and wider
Length - from 300 mm till 900 mm
TAS - SHORT
Thickness - 25/32/38/50 mm
Width - from 100 mm and wider
Length - from 1000 mm till 2000 mm
TAL - LONG
Thickness - 25/32/38/50 mm
Width - from 120 mm and wider
Length - from 2100 mm and longer
Birch plywood is a type of plywood that is manufactured using layers of birch veneers. It is known for its high-quality, strength, and durability. Plywood is a composite wood product made by gluing together thin layers of wood veneer, known as plies or layers, with the grain of adjacent layers perpendicular to each other. This cross-graining enhances the structural integrity of the plywood.
Walnut plywood is a type of plywood that is made using walnut veneers. Plywood is a composite wood product formed by gluing together layers or plies of wood veneer, with the grain direction of adjacent layers perpendicular to each other. This cross-graining enhances the strength and stability of the plywood. Walnut plywood is valued for its rich, dark color, distinctive grain pattern, and the overall high-quality appearance it brings to various woodworking projects.
4376 Wood Raw Material Processed Related Machinery Suppliers
Short on time? Let Wood Raw Material Processed Related Machinery sellers contact you.
Cherry plywood is a type of plywood that is constructed using cherry wood veneers. Plywood is a composite wood product formed by gluing together thin layers or plies of wood veneer, with the grain direction of adjacent layers perpendicular to each other. This cross-graining enhances the strength and stability of the plywood. Cherry plywood is valued for its warm reddish-brown color, attractive grain patterns, and the overall aesthetic appeal it brings to various woodworking projects.
Mahogany plywood is a type of plywood made from thin veneers of mahogany wood. Mahogany is a tropical hardwood known for its rich color, attractive grain patterns, and durability. The plywood is created by gluing together these veneers in a cross-grain pattern, enhancing the strength and stability of the final panel.
Maple plywood is a type of plywood made from thin veneers of maple wood. Maple is a hardwood known for its light color, fine grain, and overall durability. The plywood is created by gluing together these veneers in a cross-grain pattern, providing strength and stability to the final panel.
Red Cedar plywood is a type of plywood that features a veneer made from red cedar wood. Red cedar, often Western Red Cedar, is a species of softwood known for its distinctive reddish-brown color, aromatic scent, and natural resistance to decay and insects. The plywood is constructed by bonding thin layers or plies of red cedar veneer together, typically in a cross-grain pattern, to enhance the strength and stability of the final panel.
We are suppliers of raw and sawn timber from Cameroon as IROKO, Sapelli, PADOUK, Bubinga, Sipo, Maobi, Okan, Tali, Tola, Zebra, Teak, Mahogany, Tioma, Azobe, Bosse, Foga, Bibolo, FRAKE
We offer a wide selection of pine, oak, poplar, etc. wood for the production of pallets: freshly sawn; dried; thermal treatment; with anti-mould treatment; boards with
Pads: 90mm x 90mm x 90mm
Desk: 1200mm x 90mm x 18mm
Desk: 1200mm x 80mm x 18mm
Desk: 1000mm x 90mm x 20mm
Classification system: European - French CTBA classification rules
3A quality
The description of Pallet boards elements
Other dimensions available on request.
Length: 1000mm, 1500mm, 2000mm, 3000mm, 4000mm, 6000mm
Thickness: 16mm, 19mm, 22mm, 32mm, 47mm, 50mm, 63mm, 75mm, 100mm
Width: 75mm, 100mm, 115mm, 125mm, 150mm, 175mm, 200mm, 215mm, 225mm, 250mm
Materials: Radiata Pine (New Zealand, Argentina, Chile etc). Mongolian Scotch Pine (Pinus sylvestris), White Pine (Chinese Northeast)
Grade: AA: No knots, blue spot or black line on both face and back), AB: One side has no knots and some knots on the other side, CC: Both sides have knots
Colour: Natural wood color or carbonization
Certificate: FSC, ISO, Phytosanitary Certificate, Fumigation Certificate etc.
Thickness: customer's requirements
Moisture Content: Customer Request
Export of wood SARL We are looking for serious buyers only. Hard and soft wood.
These are samples. Contact for more
Eucalyptus 20000m3
Pine 10000m3
Beech 5000m3
Spruce 5000m3
Teak 10000m3
Ayous 7000m3
Ash 10000m3
Poplar 10000m3
oak 3000m3
We supply round and sawn logs, sawn timber
Timber export SARL We are looking for serious buyers only. Hard and soft wood.
This are samples. Contact for more
Eucalyptus 20000m3
Pine 10000m3
Beech 5000m3
Spruce 5000m3
Teak 10000m3
Ayous 7000m3
Ash 10000m3
Poplar 10000m3
oak 3000m3
We supply round logs and sawn ab lumber
price from 150 to 800 euros
Pressure-treated lumber is wood that has undergone a process of chemical treatment to enhance its durability and resistance to decay, insects, and other environmental factors. This treatment process involves placing the lumber in a pressure chamber and forcing preservative chemicals into the wood fibers. The most common preservative used in this process is chromated copper arsenate (CCA), but there are other alternatives like alkaline copper quaternary (ACQ) or copper azole.
Douglas Fir stud lumber refers to lumber made from Douglas Fir trees that has been specifically processed for use as framing studs in construction. Douglas Fir is a type of softwood that is valued for its strength and dimensional stability, making it a popular choice for structural applications in building construction.
