Max.swing over bed:440mm
Max.turning diameter:200mm
Max.turning lengh:215mm
Spindle speed range:45~4000rpm.
Number of tool station: 8
Turret indexing time: 0.3sec
Machine design: 20° deg
Max stroke X-axis:120 mm
Max stroke Z-axis: 225 mm
Slide way type: Square way
Spindle motor: 5.5 kw
Controller: Fanuc/Mitsubishi.
Max.swing over bed mm 440
Max.turning diameter mm 200
Max.turning lengh mm 215
Material collect length mm 100
Spindle max.bar capacity mm 42
Spindle bore diameter mm 55.5
Spindle nose A2-5
Spindle speed range Rpm 45~4000
Spindle motor Kw 5.5(7.5)
Number of tool station 8
Max.stroke X-axis mm 120
Max.stroke Z-axis mm 225
Rapid traverse X -axis m/min 12(16)
Rapid traverse Z- axis m/min 12(16)
Turret indexing time Sec 0.3
Machine design deg 20°
Slide way type Square Guide way
Spindle hydraulic chuck inch 6"
Turning tool diameter mm 20
Boring tool diameter mm 25
Hydraulic motor kw 0.75
Lubrication motor w 3.5
Power requirement Kva 15
Coolant tank capacity L 100L
Machine dimensions(L*W*H) mm 2255*1800*1800
Weight kg 2235.
Table Surface Mm 610*1400
T-Slots Mm 18*5*100
Table Loading kg 1200
X Axis Longitudinal Travel mm 1200
Y Axis cross Travel Mm 600
Z Axis Vertical Travel Mm 600
Spindle Center to Table Surface Mm 120~720
Spindle Center to column Surface Mm 610
Door opening Width Mm 1400
Spindle Taper(Standard/Option) BT40
Spindle Speed Rpm 8000/10000,12000
Rapid Feed Rate M/min 30(Linear X.Y)20(Box Z)
Cutting Feed Rate Mm/min 5-10000
Spindle motor(Standard/option) HP 20
3 Axes Motor(X/Y/Z) kw 3/3/2
Auto Tool changer(Standard/option) 20/24
Power Requirement kw 30
Air Pressure KGS/CM² 6
Cooling Motor HP ¾
Cooling Tank Capacity L 300
Machine Weight kg 7000
Machine Size(L*W*H) mm 3200*2200*2500
Controller.
Table Surface Mm 900*450
T-Slots Mm 16*4*95
Table Loading kg 400
X Axis Longitudinal Travel mm 800
Y Axis cross Travel Mm 500
Z Axis Vertical Travel Mm 500
Spindle Center to Table Surface Mm 120~620
Spindle Center to column Surface Mm 500
Door opening Width Mm 900
Spindle Taper(Standard/Option) BT40
Spindle Speed Rpm 8000(belt)/10000,12000
Rapid Feed Rate M/min 36/36/30(Linear x.y.z)
Cutting Feed Rate Mm/min 5-10000
Spindle motor(Standard/option) HP 10
3 Axes Motor(X/Y/Z) kw 1.5/1.5/2
Auto Tool changer(Standard/option) 16/24
Power Requirement kw 25
Air Pressure KGS/CM² 6
Cooling Motor HP 4/3
Cooling Tank Capacity L 120
Machine Weight kg 3900
Machine Size(L*W*H) mm 2200*2200*2260
Controller FANUC/MITSUBISHI.
To get perfect cutting results, Lasermak frame and components are specially machined in CNC machining centers with maximum precision. Lasermak is equipped with linear motors which is an optional specification in most cases for other brands. The axis, moving along with strong magnets mounted on the frame, provide high speed and maximum acceleration. (Y axis 3G). This high speed and acceleration enables your company to increase efficiency and productivity while also decreasing operational costs.
Frame and bridge are assembled by expert engineers and tested with latest high-tech measuring technology in every phase of manufacturing process. This is the main reason of the perfectness in square and circular cutting. There is no need for a second operation and Lasermak produces parts ready for assemble.
* 60% - 100% faster compared to other laser cutting machines. Axes equipped with Bosch - Rexroth linear motors and drivers reach to 120 m/min. speed and accelerations are 2 G on Y, 1,5 G on X axes
* Cuts thin materials 3 times faster compared to Co2 lasers and energy consumption is simultaneously lower
* 70% energy save by fiber optic laser technolohy is plant friendly.
* There is no need for laser-mix gas which is used Co2 laser cutting machines as there is diode technology is used for Fibermak.
* There is no need for optical components like beam path, folding mirror and quartz tube etc. as laser transmitting is done by fiber cable
* You can make production 24 hours a day and may save 50% per each costs
* You can prevent from production faults by automation in your premises
* You save from moulds and apparatuses.
* You may cut aluminium, copper, brass and other reflecting materials precisely with smooth surface quality. (You may reflecting materials such as aluminium, copper, brass, etc. Precisely and by smooth surface quality)
* FIBERMAK has strong frame, equipped with worldwide well known, quality and long life, quality components and designed to work accurately and continously even at hard conditions.
* Fast and high quantity production capacitated ERMAKSAN reflects this advantage as price to its customers. Creative designs with always highest level technology and quality are the main principles.
EFFICIENT
High cutting speeds with integrated distance sensorShort Conversation times with fast hanging of focal lenghtsOptimized cutting gas flow FLEXIBLE
Cutting of different material thicknesses2D cuttingFocal lenght tailored to your applicationAll media connections located in upper part USER FRIENDLY & SAFE
Simple and safe cartdridge replacement system with TCP retentionSast change of protective glassMotorized focal position adjustment (optional)Temperature monitoring of the sensor insertCartdridge monitoring for presenceMagnetic breakaway coupling
POWER AUTOMATION CONTROLLER
Power Automation CNC control with integrated inputs and outputs
The open, browser-based human machine interface PA HMIThe PA 8000 LW CNCThe Pa dongle which includes all needed software functions for fiber cuttingThe I/O module PAMIO which provides 4 analog in - and outputs
Ermaksan combining its 30 years press brake manufacturing experience with latest technologies, presents new generation Evolution series hybrid press brakes.
Fast, silent, precise, environmentally friendly and energy saving EVOLUTION series press brakes provides faultless bending of small parts even at different points by its high repetition and bending precision features.
Hydraulic pistons are being driven by AC servo motors without proportional direction valves on Evolution series hybrid press brakes. No need to positioning valves means more precision and less maintenance. And there is no pressure loss. While the pump is working contiuously all the day ordinary press brakes, there is onlny energy consumption when the operator pushes the foot pedal and moves the top beam for bending on Evolution series hybrid press brakes. As there is no pressure loss, energy i.e. bending power is at highest level. Oil level is also reduced 80%. there is no oil heat up and the oil has long life-time
- Near silent working (63dB). Most silent one amongst the sheet metal bending machines.
- Minimum 60% average active energy save and energy loss minimized sheet metal bending machine.
- Energy consumptions:
- 95% less while standing ready for bending
- 95% less while free fall movement of the beam
- Minimum 50% less while bending. When the thickness of sheet decreases, energy save increases. Furthermore when the resistance of sheet has been get overcome during bending, energy consumption reduces immediately.
- 84% less while ironing if waiting time described in the bending program
- 70% less while return movement of the beam
As the oil doesn’t heat up, super accurate repeatability feature maximized press brake.
- High bending precision 0.01 mm.
- Faultless bending of small parts even at different points.
- 80% less oil volume and less frequent oil changes. Moreover there is no need to change oil at least 5 years.
- 3 times longer life-time for system and pomp. High quality equipments and system’s working during only motion guarantee this.
- Fast and rapid working press brake by servo motor and high efficiency pump dynamism.
- There is no continuous oil circulation as the pump doesn’t work all the day, thus the oil doesn’t heat up.
- Bending power is at highest level by no pressure loss as there are no proportional valves.
- Y1 and Y2 axes have independent oil tanks. Thus, the maintenance will be realized at only one side if any brake-down appears. Therefore, servicing will be easier.
Ermaksan is continuing to provide wide and flexible solutions by its new Plasma Cutting Machine has high and accuracy cutting quality, the advantageous of low working and investing cost, convenient for placing in a production line and for automation.
Ermaksan Plasma Cutting Machine can easily be operated and carried. It's produced with latest production technologies and used well-known and accepted cutting and CNC equipments.
1- Ball linear guideway
2- Ball screw drive system
3- Precision aluminium construction body module system
4- 3 axis motor drive
5- The aluminium table system with t-slot
6- The optional X, Y, Z cutting area
Working area
X axis (minimum): 1500 mm
X axis (maximum): 2000 mm
Y axis (minimum): 1000 mm
Y axis (maximum): 1500 mm
We can offer you a horisontal boring machine 2g660, made in russia in 1983.
The machine have been never used even no mounted since it was produced in manufacturing plant.
The machine was prodeced with cnc, but you know the system is very old and it have to be charged. The machine is incomplete.
Tech.Data of the machine:
Diameter of spindel 200mm
X-travel 1800mm
W-travel 1000mm
Y-travel 3000mm
X-travel 5000mm.
Rotary table: 3500x3500mm, 50ton.
