BRASS ROLL
It is produced with requested thickness and wideness. Brass rolls have thick- ness between 0,1 and 1 in mm with 350 standart are always in our stock. It is produced in accordance with full annealing process as half hard. Any prob- lems occur while it is using in press due to the precision production and good slitting process. It should be noted that softness of temper is very important in full annealing.
Brass Roll Sizes
0,1 - 5 mm thickness and 350 mm wideness standart brass roll
0,1 - 5 mm thickness and 660 mm wideness standart brass roll
0,05 - 5 mm thickness and 1000 mm wide- ness tailored brass roll
0,1 - 5 mm thickness and requested wideness
Area of Usage
Jewellery, fittings, decoration, machine equipment, defense industries, textile indus- try, automotive industries, radiator, civil work, electric industries.
We are manufacturers of brass profiles. Some of the main brass profile types we manufacture are brass hinges profiles, brass locks profiles, brass electrical profiles etc.
Brass tubes,
18*0,80 mm 30 MT
20*1 mm 5 MT
22*0,75 mm 5 MT
22*0,80 mm 5 MT
24*0,80 mm 5 MT
They are in standard length, between 300 and 360 cm. Since brass tubes are brittle (in order to prevent physical damage) they are tied in three places with strong ropes, and each tie is 60-80 Kg.
In order to protect the product physically, they are then placed in wooden chests.
A drawn brass rod of the round cross-section with a diameter of 135/200 mm
The brass rod� is made on a horizontal continuous casting machine on Verkhnidniprovsky Foundry and Mechanical Plant (Founded in 1898) is today the largest manufacturer and exporter of brass products in Ukraine. Many years of experience combined with progressive engineering personnel, and continuous implementation of advanced production technologies, ensure the highest quality of products that meet global requirements and standards.
The production capacity of the enterprise is more than 500 tons of brass rod per month of brands CW617N (58-2), CW608N (59-1), CW612N (59-2) or any other brass alloys at the request of the Customer. Our own spectral analysis laboratory guarantees the quality of the released alloys. Delivery routes to European countries, the USA, Canada, Turkey, etc. have already been established. They allow too quick and efficiently deliver the necessary volumes of cargo. The main components of brass alloys are copper and zinc, so the price of these raw materials directly affects the cost of brass rod. The information is provided to users for reference. A drawn brass rod of round cross-section with a diameter of 200mm.
Chemical Composition: Cu>60%, 1%>Pb>2.95%, Sn<1.5%, Fe<0,7%,Al<0,5%, Ni<1%, Si<0.3%, Mn,0,2%, other <1.5%, Zn is the rest.
Buy Brass Bullets order online in that can handle high current are available from Lucas Style, making them ideal for 3500mAh or greater capacity batteries or 80A+ systems. Our brass connectors are precision machined and have a rear side-cut for easy soldering. This terminal is recommended for crimping to the wire. Size: 1.0mm2, 2.0mm2. Order best Brass Bullets Connector Terminals
