2 Stroke 30Hp Long Shaft Outboard Engine Boat Motor
30 HP outboard motor displacement is smaller, it easier for maintenance, will give you performance and reliability for your long days of boating. In many countries (especially for the developing areas) of the world where outboard demand is primarily for commercial uses, the water quality, weather and climate variance and long hours of continuous use make for a very harsh use environment. This is the two stroke outboard motor series developed mainly for commercial use such as on fishing and passenger vessels. This series suits harsh conditions that include everyday use and situations involving long hours of continuous operation. Enhanced strength and durability in locations such as roller bearings, crankshaft and cylinder block, as well as an improved water pump that ensures plenty of cooling effect, combine to deliver substantial improvements in durability and reliability.
Specifications
Engine Type 16-Valve DOHC Direct-Action In-line 4
Displacement 2670 cc
Bore x Stroke 94x6.2 mm
Recommended Max RPM 5000-6000
Lubrication System Wet Sump
Fuel Management EFI
Ignition TCI
Starter System Electric
Alternator Output 12V - 37A with Rectifier Regulator
Operation Method Remote Control
Trim & Tilt Method Power Trim & Tilt
Digital Network Gauges with Fuel Management Standard
Gear Ratio 2.00:1
OEDA Emission Rating ????
Scavenging Double Overhead Camshaft
Fuel Management EFI
Oil Pan Capacity (litres) 5.8
Spark Plug LFR5A-11
Gear Shift F-N-R
Exhaust system Through Propeller Hub (Jet)
Prop. Engagement Spline
Specifications
Engine Type 16-Valve DOHC Direct-Action In-line 4
Displacement 2670 cc
Bore x Stroke 94x6.2 mm
Recommended Max RPM 5000-6000
Lubrication System Wet Sump
Fuel Management EFI
Ignition TCI
Starter System Electric
Alternator Output 12V - 37A with Rectifier Regulator
Operation Method Remote Control
Trim & Tilt Method Power Trim & Tilt
Digital Network Gauges with Fuel Management Standard
Gear Ratio 2.00:1
OEDA Emission Rating ????
Scavenging Double Overhead Camshaft
Fuel Management EFI
Oil Pan Capacity (litres) 5.8
Spark Plug LFR5A-11
Gear Shift F-N-R
Exhaust system Through Propeller Hub (Jet)
Prop. Engagement Spline
447 Engine Spare Parts Suppliers
Short on time? Let Engine Spare Parts sellers contact you.
Used cooking oil, refined cooking oil, used engine oil, used and new shipping containers, food and beverages, seeds, nuts, spices, meat, fresh and frozen seafood.We provide wholesale, distribution, shipping and clearing services to our customers
The Service We Provid - We Take Care Of Your Order
Punctual delivery time:
We put your order into our tight production schedule, ensure your punctual delivery time.
Production / inspection report before your order packed.
Shipping notice/ insurance to you as soon as your order is shipped.
After sales service:
We respect your feed back after receive the goods.
We provide 12-24 months warranty after goods arrive.
We promise all spare parts available in lifetime use.
We lorge your complain within 48hours.
Professional sales:
We value every inquiry sent to us, ensure quick competitive offer.
We cooperate with customer to bid tenders. Provide all necessory docuement.
We are a sales team, with all technical support from engineer team.
We have and supply sardines in brine,tomato sauce or hot tomato sauce
-Ingredients:
3-5 pieces sardines, 100% vegetable oil, salt
Tin type :Easy open lid / Hard open lid
-Canned:
High Temperature Sterilization,Advanced technology,Strict QC, Technical expertise
-Feature:
Soft taste, no impurity ,no artificial additives
-Storage
Store in cool & dry place, avoid direct sunlight.
Packaging Detail:
Canned, Bulk, or as per the clients' requirments
125/90g per tin,50 tins per carton,3200 cartons per container.white or brown paper carton/ color printing carton
Being a leading enterprise, we are instrumental in offering a wide range of Fresh Onion round the world. We are involved in offering an extensive quality range of Fresh Red Onion to our customers. This Fresh Red Onion is grown by our vendors using modern tools and traditional farming practices. We are ranked amongst the distinguished organizations that is engaged in offering high quality Fresh Red Onion. Onions are widely used to add taste to different foods. It is cultivated by using excellent quality of seeds and by using top grade of fertilizers which provides excellent growth to the onion. Besides these products are precisely checked for quality before shipping. Our professionals deliver stock options of fresh onion which has all the necessary elements. Sourced from South Indian, the stock is offered at market leading prices.
Features:
Free from chemical treatment.
Fresh and pure.
Various health benefits.
Longer shelf life.
Long lasting freshness. Varied capacities available.
â?¢ Taste
â?¢
Freshnes
Nutrient content intact
Fine quality
High in demand
Easily available
Details Value
Style Fresh
Product Type Liliaceous Vegetables
Type Onion
Weight (kg) 25
Certification ISO
Size (cm) 5
Maturity 100%
Shape Round
Part Non-Peeled
Cultivation Type Common
Color Red/Yellow/White
Item Type Shallots
Crop New Crop
Size (cm) 3-5cm,5-7cm,7-9cm,9-11cm
Package As per Requirements, 20kg/mesh bag/ 9kg/10kg/15kg/20kg/25kg mesh bag
Quantity/conveyance
20 ft Container
One of our subsidiary company has 3 decades of experience in hot forging technology. We have the capabilities to work with work with variety of raw materials, parts of varying size and complexities in both conventional heat treatment and controlled cooling and we also have CNC machining capabilities
Products Description
Adipic acid is an important organic dibasic acid with the structural formula HOOC(CH2)4COOH. It can undergo salt-forming reaction, esterification reaction, amidation reaction, etc., and can be polycondensed with diamine or diol to form high molecular polymer. Adipic acid is an industrially important dicarboxylic acid. It plays an important role in chemical production, organic synthesis industry, medicine, and lubricant manufacturing. Its output ranks second among all dicarboxylic acids.
Application
1. Adipic acid is mainly used in the production of nylon fibers and engineering plastics.
2. It is also widely used in the production of polyurethane and other esters, most of which are used in the production of PU, shoe sole slurry, polyurethane foam, etc., and a small part is used as advanced lubricating oil.
3. Higher esters of adipic acid can be used as plasticizers for polyvinyl chloride and its copolymers, and natural synthetic rubber.
4. A large amount of adipate is used in polyvinyl chloride for food packaging, film and insulation.
5. Adipic acid is also used as an acidulant for various foods and beverages.
AS PS ABS PLA HDPE Granules
Acrylonitrile - styrene copolymer.
Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as
engineering plastics.Excellent heat resistance and solvent resistance.
Application.
1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases.
2. Special grade: blade of fan, batteries housing, lighters.
3. Refrigerator Sleeves, Miscellaneous
4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling
5. High Transparency, Heat Resistance, chemical resistance
PC + Glass Fiber reinforced (GF)
The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating
improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm.
Grade: (ML3410-30 / MH3515-30 / MN-3110-30)
1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF)
General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact.
Application: Watch parts, switches and nobs, OA equipment.
2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF)
Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage
and dimensional stabilities.
Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames.
3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF)
MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance,
surface aesthetics and weld line strengths.
Applications: Meter cases, electrical and electronic housings.
Our Durum Wheat Yellow Semolina is made of Canadian Quality Durum Wheat which is processed at our facility. Semolina is the coarse, purified wheat middlings of durum wheat used in making pasta, breakfast cereals, puddings, and couscous. The term semolina is also used to designate coarse middlings from other varieties of wheat, and from other grains, such as rice and maize.
Semolina made from durum wheat is yellowish in color. Semolina is often used as the base for dried products such ascouscous, which is made by mixing roughly 2 parts semolina with 1 part durum flour (finely ground semolina).
Packing : Multi wall new plain PP bags of 25 kg or 50 kg.
(Prices may vary as per any change in Size & Quality of Packing and also if there is any Special Marking or Design required by the Buyer)
Our Durum Wheat Yellow Semolina is made of Canadian Quality Durum Wheat which is processed at our facility. Semolina is the coarse, purified wheat middlings of durum wheat used in making pasta, breakfast cereals, puddings, and couscous. The term semolina is also used to designate coarse middlings from other varieties of wheat, and from other grains, such as rice and maize.
Semolina made from durum wheat is yellowish in color. Semolina is often used as the base for dried products such ascouscous, which is made by mixing roughly 2 parts semolina with 1 part durum flour (finely ground semolina).
Inspection : SGS
Minimum Order Quantity :One X 20 FT Container
Load ability : 22.5 MT per 20 FT Container
Delivery : Within 15 working days from the date of receipt of Confirmed Payment Instrument to the loading port.
Adipic acid is a synthetic fiber, nylon 66, nylon engineering plastics, polyurethane foam, synthetic leather (PU), the main raw material of synthetic rubber and film, also can be used in medicine, pesticides, spices, such as the production of adhesives and soldering flux.
Packaging & Shipping
Logistics transportation methods can be divided into various ways according to the different transportation means.
Different transportation ways had different features.We will consider wholelly and decide according to cargo situation,cargo type,delivery period,transportation cost.
