DIESEL GASOIL ,ULSD , EN590-10PPM ( EURO-5)
Quantity: Min 50,000 MT and Max 500,000 MT per Month x 12 Months
CIF : Gross $620/ Net $610 per MT
FOB : Gross $590/ Net $580 per MT
Rotterdam, Houston, Fujairah
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators.
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names.
Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400
Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol.
D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature).
Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine.
The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades:
L - summer, used at ambient temperatures above 0 C;
3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation <-35 C and n <-25 C), or winter, used at temperatures up to -30 C, then the fuel must have a stasis <-45 C and n <-35 C);
- Arctic diesel fuel, the temperature of which is up to -50 C. The sulfur content in diesel fuel of grades L and Z does not exceed 0.2% for type I fuel and 0.5 for type II fuel, and grade A 0.4%
product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS
(EN590) 10 PPM/50PPM
Origin: Kazakhstan
The detailed specification: Meets all International Standards
Total Spot quantity order: 100,000MT
The price and discount:
- FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT
FROM NWE PLATTS
- CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS
Shipment:
- TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per
conditions in Seller`s FCO
Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via
MT103
Payment Procedure: According to the terms of the contract, to be mutually agreed upon
by Buyer & Seller.
Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.
Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6
We are an oil and gas company Agents, Facilitators and Mandate; we source crude oil for Refineries and large volume buyers, and other petrochemicals like AGO, LPFO, PMS, DPK and other Russia product origin listed below for the upstream and downstream sectors consumption.
1) D2- Gas Oil (Diesel) Lo.2-62 Gost 305-82 , Quantity- 50,000mt 500,000mt For Cif And Fob, Spot And Contract Basis.
2) Jp54 Aviation Kerosine Colonial Grade 54 Russia Origin, Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis.
3) Aviation Turbine Fuel Jet A-1 Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis.
4) Bitumen Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis.
5) M100 Mazut 100 Gost 10585-99 And 10585-75, Quantity- 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis.
6) Liquid Petroleum Gas.Gost 20448-90, Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis.
7) Liquified Natural Gas, Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis.
8) Russia Sn 150 Base Oil, Quantity - 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis.
9) Russia Sn 500 Base Oil, Quantity 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis.
10) En590 Biodiesel, Quantity 50,000mt- 500,000mt, For Cif And Fob, Spot And Contract Basis.
11) Automotive Gas And Oil (Ago), Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis.
16) Russia Export Blend Crude Oil (Rebco), Quantity 1,000,000bbls 6,000,000bbls, For Cif And Fob, Spot And Contract Basis.
The dealer company is looking for Buyers to enter into annual Contracts for the sale of EN 590 10 ppm diesel fuel produced by countries that are not under sanctions, in volumes from 100,000 to 200,000 tons per month on the terms of CIF ports of China, Hong Kong and other countries of the Southeast of Asia. Delivery of the first batch of goods in the amount of 100,000 - 200,000 MT is trial; Total quantity: 1 200,000 - 2 400,000 tons per year; Terms of payment: SBLC; Price: $ 620 MT; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Delivery time: within 15-20 days after issuing the letter of credit. Contact person: Nick
The dealer company is looking for Buyers to enter into annual Contracts for the sale of diesel fuel EN 590 10 ppm, produced in countries that are not under sanctions, in the amount of 100,000 to 300,000 MT per month on the terms of CIF Fujairah. The delivery of the first batch of goods in the amount of 100,000 tons is trial; Total quantity: 1,200,000 - 3,600,000 MT per year; Payment terms: SBLC; Price: $ 650 per ton; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Delivery time: within 15-20 days after issuing the letter of credit. Contact person: Nik
The dealer company is looking for Buyers for diesel fuel EN 590 10 ppm produced in Azerbaijan in volumes from 5,000 to 15,000 metric tons per month on EXW terms, Klaipeda Sea port terminal (Lithuania), according to Incoterms 2020. Total quantity: 5,000 - 180,000 MT per year. The first batch is trial, with a possible extension of the Agreement for 11 months; Payment terms: DLC (MT700), irrevocable, divisible, transferable; Price: $670 - $680 per ton; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Performance guarantee: 2% of the nominal value of the monthly delivery by the Seller's Bank to the Buyer's Bank; Delivery term: within 20 working days from the date of issue of the letter of credit by the Buyer. Contact person: Nik
The dealer company is looking for Buyers to enter into annual Contracts for the sale of EN 590 10 ppm diesel fuel produced in non-sanctioned countries, in volumes from 50,000 to 100,000 tons per month, FOB Fujairah. The delivery of the first batch of goods in the amount of 50,000 - 50,000 MT is trial; Total quantity: 600,000 - 1,200,000 tons per year; Terms of payment: MT103/TT; Price: $ 690 MT; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Transaction procedure DIP & PAY: The Buyer issues the ICPO and after receiving the CI, provides the BCL, in response, the Seller provides the Buyer with the PPOP (Fresh report of SGS, ATV, TSR, Injection Report and DTA). Contact person: Nick
The dealer company is looking for Buyers for the conclusion of annual Contracts for the sale of EN 590 10 ppm diesel fuel produced in countries that are not under sanctions, in volumes from 25,000 to 100,000 tons per month, FOB Rotterdam. Delivery of the first batch of goods in the amount of 25,000 - 50,000 MT is trial; Total quantity: 300,000 - 1,200,000 tons per year; Terms of payment: MT103/TT; Price: $ 625 - 630 MT; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Transaction procedure DIP & PAY: The Buyer issues ICPO together with TSA, and the Seller, in turn, provides the Buyer with PPOP (ATV, TSR, Injection Report and DTA). Contact person: Nick
