Construction chemistry materials for repair of concrete, coatings for concrete, waterproofing materials, adhesives, specialized and customized materials..
Our company, a Taiwan funded enterprise, has been specialized maunufactuering screw nut machine and hardware for 20 years. Dongguan factory was founded in 1994. All the machine parts are mainly imported from Taiwan
And the 17B6S detail can see in the below,
1. Technical Parameter
MODEL: SW-NF 17B 6S NUT FORMER MACHINE
FORGING STATION 6S 7S
CUT-OF DIA (MAX) 18mm
CUT-OFF LENGTHE (MAX) 30
KICK-OUTENGTH (MAX) 120 mm
CENTER DISTANCE BETWEEN DIES (MM) 70
RAM STROKE (MM) 100mm
FORGING POWER (TON) 1200 ton
PRODUCT SIZE (INCH) 1/4 7/16 inch
OUTPUT PCS/MINUTE 180
MAIN MOTOR (HP) Â 30
PUMP MOTOR (HP) 1/1
LUBRICANT (GALLON) 300
APPROX.WT (TON) 11
FLOOR AREA REQUIED (L*W*H) 3.5m* 2.15m* 1.7m
2. Application:
Not only used for manufacturing Normal nuts, like Hex nut, Flanged nut, Square nut, Weld nut, Cap nut, Rivet nut, Extra thick nut, but also Motorcycle link pin, Oil plug screw, Pipe joint, Chain roller, Bearing roller, Bearing ring, Expansion anchor, Bushing sleeve, Bicycle and Motorcycle shaped spare parts, Auto spare parts, shaped nuts and various shaped pieces of shaped and non-standard items, ect, which are widely applicable in the fields of construction, metallurgy, furniture, electronics and electric appliance, automotive, aviation and other industries.
3. Main Features:
No.1 The machine body and main sliding block are processed through stress relieving after being forged to prevent from deformation and ensure durable mechanical stabolity.
No.2 Machine body of high alloy steel imported is prossed through quenching treatment to ensure lasting resistance to wearing.
No.3 Eash cam is precisely designed with computer and made in CNC process center to ensure correct and smooth cam common normal.
No.4 Applying air compressor clutch,smooth and steady start current brake,realization of inching, single stroke and continuous running, besides inching way,main sliding block will stop at the utmost point ehen the machine stops every time to provide max. operation space.
This VWT-FFS-4372 Double Loop tunnel construction and its technology equipment are optimized for a professional use of sportsmen, army troop as well as general public and schools. Optimization of the fan can be performed on any other scenario of the use of the tunnel (like only sport tunnel utilization, or only to tourism utilization, military and special training purposes, or eventual their combination...). Optimization means a proper selection of tunnel dimensions, fans and engines parameters for proposed purposes to gain an optimal ratio between desired performance and operational costs.
Dimensions and technical parameters of this tunnel offer the best conditions for the professional requirements on speed, space and height. Its size provides ample space for the entire training even of group formations of eight skydivers. Tunnel with 4,3 m of flying chamber diameter is the perfect place for training of army parachutes and special troops with their specific equipment. From tourist's point of view, the tunnel offers comfortable space even for flying couples with instructors or other smaller groups.
Thanks to a comprehensive fan optimization the, tunnel allows operation of profi-flights as well as fun-flights at very low operation costs.
Materials and Dimensions
Air conductors in the aboveground part of the tunnel are made of sheet steel.
All steel elements are provided with corrosion protection.
Tunnel skin is made by sound-insulation panels KINGSPAN.
Net dimensions of the tunnel are:
width 30 m
depth 10 m
height 32 m
The typical depth of foundation of ground concrete structure is 7,5 m.
The typical height of the tunnel above the ground is 24 m.
Flight chamber
Flight chamber consists of a glass part, which is on its top connected to a steel construction of tunnel shell. Lower part of the flight chamber is purely cylindrical with a diameter of 4,3 m and a height of 5 m. The upper part of a flight chamber is made from steel and its height is 9 m. The shape of this part of flight chamber is gradually changing from a circular diameter of 4,3 meters to circular diameter 4,3 x 4,3 m.
The overall maximum height of flight chamber 14 m
The height of the glass part of flight chamber 5 m
Diameter of flight chamber 4,3 m
Maximum speed
Maximum air speed at which the tunnel can be operated continuously is 80+ m/s (300+ km/h).
Motors, fans and electronic equipment
The air stream is formed by four vertically stored fans, each of 3.15 m in diameter, which are powered by a 4 electro-motors, each rated at 355 kW. RPM are controlled and regulated by 4 frequency changers from ABB. Control and monitoring system of the tunnel is realized using SIEMNS technology.
Cooling
Tunnel cooling is provided by an active cooling unit with a maximum power consumption of 330 kW, which corresponds to a maximum cooling performance of 1 000kW. Cooling compressor unit is located outside the tunnel and two pairs of optimized coolers installed in the tunnel design ensures a comfortable temperature in the flight chamber even during very warm summer period. During cold seasons, from the certain threshold temperature, the compressor unit is automatically switched to dry coolers, which maximize utilization of outside cold air and rapidly decrease the power consumption (up to 30 kW).
--------------------
Offered price represents VWT-FFS-3672 /3.6m , double loop technology ,FOB Cz Praha
I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex.
Technical description: luminaire consists from body, basic plate and
Flange with protective glass. Body and flange are castings from grey cast
Iron treated with polyester powder paint. Luminaire can be suspended
By the steel pendant with 2 eyes o 18 mm on the upper part of the
Body. Connecting area (increased safety „d“), with connecting clamps and
2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16
Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed
With cover from grey cast iron. Steel basic plate with electric parts
And reflector is fixed in the body. Flange with glass cover is screwed
In the body and secured with locking screw and silicon sealing
Against unlocking, thread shapes a rift of flameproof enclosure „d“.
Protective hardened glass resistant against mech. Shock min. 7 j is
Fixed to the flange, the connection is filled with polyurethane putty.
A steel hinge is fixed to the flange as the mobile one and enables to
Hang the flange during mounting or dismounting. Steel parts are
Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak.
Luminous sources:
Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w
Technical description: luminaire consists from body, basic plate and flange
With protective glass. Body and flange are castings from grey cast iron treated
With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the
Upper part. Connecting area (increased safety „d“), with connecting clamps
And 2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland
No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from
Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the
Body. Flange with glass cover is screwed in the body and secured with locking
Screw and silicon sealing against unlocking; thread shapes a rift of flameproof
Enclosure „d“. Protective hardened glass is resistant against mech. Shock min.
7 j and is fixed in the flange, the connection is filled with a polyurethan putty.
A steel hinge is fixed to the flange as the mobile one and enables to hang
Up the flange during mounting or dismounting. Steel parts are galvanized
And chromated. Luminaire is equipped with protective guard from galvanized
Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting
Terminal block enables interchanging 2 phases (4-core cable). Luminaire
Is equipped with 2 inner and 1 outer earthing clamps for conductive connection.
Luminaire is designed as the through-way one, when used as end piece, there is
Necessary to use blinding plug (optionally on order). Packing carton is filled with
Polyurethane foam instapak.
Luminous sources:
Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next
Carton (mm/pcs) 430x240x240, weight 18 kg/pcs
11 Concrete Blocks Suppliers
Short on time? Let Concrete Blocks sellers contact you.
Luminaire consists of body, basic plate and
Flange with protective glass. Body and flange are made of alsi alloy
Treated with polyester powder paint. Luminaire can be suspended
By the help of steel pendant with eye o 18 mm. The connecting area
(increased safety „e“) is placed on the side of the body and equipped
With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables
O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is
Aluminium basic plate with electro-module mounted inside the
Luminaire. Electro-module consists of 20 x led cree xp-g (luminous
Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000,
Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and
Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing
Output current of the led driver 700ma/350ma. Flange with protective
Glass is screwed in the body and locked with securing screw; thread
Shapes a rift of flameproof enclosure „d“. Protective hardened glass is
Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection
Is filled with polyurethane putty. The mobile steel hinge is fixed to
The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak.
2G Ex de IIC T4-T6 Gb
II 2G Ex de IIC T4-T6 Gb
II 2D Ex t IIIC T max.surf Db
Luminaire consists of body, basic plate and
flange with protective glass. Body and flange are made of AlSi alloy
treated with polyester powder paint. Luminaire can be suspended
by the help of steel pendant with eye o 18 mm. The connecting area
(increased safety „e“) is placed on the side of the body and equipped
with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables
o 9-16 mm. Area is enclosed with cover and sealed with silicon. There is
aluminium basic plate with electro-module mounted inside the
luminaire. Electro-module consists of 20 x LED CREE XP-G (luminous
flux 4000 lm, lumen per watt 88 lm/W, colour temperature 3700-5000,
Colour Rendering Index ~80, guaranteed life-time min. 50.000 hrs.) and
cooling unit. Input of the luminaire is adjustable (45W/22,5W) by changing
output current of the LED driver 700mA/350mA. Flange with protective
glass is screwed in the body and locked with securing screw; thread
shapes a rift of flameproof enclosure „d“. Protective hardened glass is
resistant against mech. shock min. 7 J and is fixed in the flange; the connection
is filled with polyurethane putty. The mobile steel hinge is fixed to
the flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug HSK-V-Ex. The blinding parts can be delivered on order optionally. Versions K are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam Instapak.
luminous sources:
EcoClasik 140W E27, CLAS 200W E27, DULUX D26 W G24d-3, Bulb100W/220 E27, NAV-E 110 W E27, HQL125 W E27, NAV-E 50/l 50 W E27, HQL 80 W E27, Master PL E 23 W E27 and next.
2G Ex de IIC T3-T6 Gb
II 2G Ex t IIIC Tmaxsurf.-table Db
Technical description: Luminaire consists of body, basic plate and
flange with protective glass. Body and flange are castings from AlSi alloy.
Steel hinge with eyes o 18 mm is fixed on the upper part of the body.
Connecting area (increased safety „e“), with connecting clamps and 2
cable glands HSK-K-Ex M25x1.5 for cables o 9 – 16 mm (HSK-M-Ex for
cables 10 – 16 mm for versions F), is placed on the side of the body. This
area is covered with cover and sealed with silicon. Steel basic plate with
electric parts and reflector is fixed in the body. Flange with protective
glass is screwed into the body and secured with securing screw against
unlocking; the thread creates a rift of flameproof enclosure „d“. Protective
cover from hardened glass is resistant against mechanical shock min.
7 J and is fi xed in fl ange; the connection is filled with a putty (polyurethane
glue). Steel mobile hinge is fixed on the flange and enables to
hang up the flange under body during mounting or exchanging light
source. AlSi parts of luminaire are treated with polyester powder paint;
steel parts are galvanized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting
terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and
1 outer earthing clamps. Luminaire is designed as through-way one. When it is used as the end piece, there
is necessary to replace one cable gland with blind screw V-Ex or to blind one unused gland with blind plug
HSK-V-Ex (versions F: one cable gland must be replaced with blinding screw V-Ms-VMQ-Ex). Blinding parts
are not attached - delivered optionally on order only. Versions K are equipped with protective guard from
steel wire. All types can be equipped with lampshade (optionally on order only). Packing carton is filled with
polyurethane foam Instapak
luminous sources:
HWL 500W E40, SPC A T CL 250W E40, HQL 250W E40, NAV-E350 350W E40 and other.
NOTE ! Ballast box 205.1 can be used for HP Mercury and sodium lamps..
Pork/beef offal mix 0.50eur/kg
Duck parts ground 0.60eur/kg
(You can use like game duck has the same dna like mallard duck)
Salmon 0.75eur/kg
Mdm chicken 0.43eur/kg
Mdm beef liver 1.20eur/kg
Mdm salmon 1.15eur/kg
Beef offals 0.68eur/kg
Beef liver 0.73eur/kg
Pallete frozen naked block e2
Price is whit exw
if you need any other raw materials, please give me the information, maybe we can find and produce for you
11 Concrete Blocks Suppliers
Short on time? Let Concrete Blocks sellers contact you.
