Laboratory instruments like drying box, incubator, microscope, spectrometer, spectrophotometer, shaker, laboratory consumables.Shipping, sea, air, express to the door and other services
Feature
7 inch Color LCD , Touch screen
Flow cell and Cuvette test mode compatible
Real time curve showing
7 wavelength , 90 test item pre-programmed
Memory for 10,000 sample results
Light source hibernate function making lamp life longer
RS232 interface, PC connecting
The traditional method of radiographic inspection for weld of oil and gas pipeline is to use radiographic source and film for transmission. However, with the improvement of quality control efficiency by the construction party, the method of film imaging can not meet the requirements of customers for efficiency. In addition, the film also has some problems, such as image processing, poor preservation, environmental pollution and so on.
Based on this situation, HATATEST independently developed the PT360 pipeline weld DR automatic detection system.
HATATEST Automatic DR Detection System for Pipeline Weld-PT360 is a kind of Automatic DR Detection robot who is similar with Transcan system in Russia, But HATATEST Automatic DR Detection System for Pipeline Weld-PT360 as the following highlights comparing with Russian Transcan :
-- Aluminum alloy chain spider, light and easy to carry
-- 400-1219 mm, any caliber can be used
-- Battery drive, maximum working time 12 hours
-- Software control (start and stop can be controlled manually by software, or automatic start and stop can be set)
-- Single-arm or double-wall transillumination
-- The whole installation process only takes 2 minutes
-- Real time imaging, greatly improved detection efficient
-- Image quality ISO 17636-2 Class B
-- Adjust the fixed device of the radiation source according to the customer's requirements, and match different radio sources
Up to 200 constant tests per hour
1000 patient test data
2000 test procedures can be saved
New concept test systems
Please check the attached product information.
30L rotary evaporator is a common laboratory equipment. It's consisted with motors, distillation flask, heating pots, receiving flask, condensers and so on. This device is mainly used for continuous distillation experiments under vacuum conditions. Our company designed 10L, 20L, 30L ,50L medium vacuum rotary vacuum evaporator for users to choose.
Main Features of the RE-3002 rotary evaporator
1. The main frame of stainless steel and aluminum alloy
2. Polytetrafluoroethylene and imported fluororubber combined seal
3. The real-time display of the vacuum is up to 0.098Mpa
4. GG-17 glass,High temperature resistance, anticorrosion
The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional.
The working principle of the series reactor: double layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat water, water or hot oil or electric sets to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction.
BENEMED BM-300E Automatic Electrolyte Analyzer for Hospital Lab ISE
Laboratory Equipment Electrolyte Analyzer Bm-300e
Features
Throughput: 60 samples/hour
Principle: ISE(Ion Selective Electrode)
5.6-inch color touch screen
Auto sampling, washing, calibration
Maintenance-free electrodes, 12 months lifespan
Simple tubing system, easy maintenance
CE marked
Technical Specifications
Sample type: Serum, etc.
Sample volume:100-200�¼L
Reagent consumption: 2 times sample volume
Calibration: Automatic or On-demand
Closed reagent, real time monitoring reagent
Printer: Internal thermal printer
Display: LCD
Multiple language: English, Russian, etc.
Storage: Up to 50,000 results
Interface: RS-232, support LIS
Working temperature:15-30 C
Humidity: 20%-80%
Dimension: 430 275 410mm
Power: AC100~240V, 50/60 Hz, 80W
Net weight :8 kg
Reagent
DS-I(NO.3) Standard A Standard B (390/160 mL)
Cleaning Solution (250 mL)
PVC Electrode Activating Solution
PVC Electrode Activating Solution(50 mL)
DS- Ref Ref. Filling Solution(10 mL)
DS- ISE Filling Solution (10mL)
Deprotein Solution
(R1: Diluent 18mL/bottle 1; R2: Protease powder 100mg/bottle6)
3-part blood cell counter
20 parameters + 3
histograms
2 counting channels
Up to 60 samples/hour
10.4â?³ large color LCD
Built-in printer, USB port
Stable, durable and
economical
Feature:
7 inch Color LCD , Touch screen
Flow cell and Cuvette test mode compatible
Real time curve showing
7 wavelength , 90 test item pre-programmed
Memory for 10,000 sample results
Light source hibernate function making lamp life longer
RS232 interface, PC connecting
Test mode: Kinetic, End point, Two point, Absorbance
8 inches precision spin coater adopts all-aluminum alloy chamber, which is beautiful and sturdy in appearance; the upper cover of the chamber adopts 360�° visible plexiglass design, which is convenient for customers to observe the coating condition during use. The spin coater adopts advanced precision motor, the maximum speed can reach 10,000rpm, which effectively guarantees the uniformity of film formation. In addition, the instrument adopts touch screen control and can preset the coating curve, which greatly simplifies the use process and reduces the learning cost. It is very suitable for laboratory purchase.
8 inches precision spin coater application:
The spin coater can coat liquid or colloidal materials on silicon wafers, crystals, quartz, ceramics and other substrates to form thin films. It is mainly used in photoresist spin coating, biological medium preparation, sol-gel method for polymer film production, etc.
The dual-target magnetron sputtering coating instrument is a small laboratory coating instrument with two targets developed by our company, which can be used to prepare single-layer or multi-layer ferroelectric thin films, conductive thin films, alloy thin films, semiconductor thin films, ceramic thin films , Dielectric film, optical film, etc.
Compared with ordinary plasma sputtering, magnetron sputtering has the advantages of high energy and high speed. The coating rate is high and the sample temperature rise is low. It is a typical high-speed low-temperature sputtering. The magnetron target is equipped with a water-cooled interlayer. The water chiller can effectively take away the heat, avoid heat accumulation on the target surface, and make the magnetron coating work stably for a long time.
Compared with similar equipment, this dual target magnetron sputtering coating instrument is not only widely used, but also small in size and easy to operate, it is an ideal equipment for preparing thin films in the laboratory.
In animal husbandry, the technology of artificial insemination through frozen semen has been widely used. As a low-temperature storage container, semen storage tanks are mainly used for the long-term preservation of fine semen or embryos of livestock such as cattle, pigs, and sheep. With the deep low temperature of liquid nitrogen -196�°, the activity of sperm can be maintained for a long time, which is an important tool for artificial insemination and breeding.
So, what are the advantages of semen storage tanks?
1. Made of lightweight and durable aluminum alloy, it has good corrosion resistance and oxidation resistance, and can withstand outdoor wind, sun and rain to a certain extent. It is equipped with handles or shoulder straps for easy movement in outdoor environments, especially suitable for outdoor operations such as ranch inspections and on-site semen collection.
2. The multi-layer vacuum insulation design effectively isolates external heat, minimizes the natural evaporation of liquid nitrogen, and ensures the stability of the low-temperature environment inside the container. â??
3. Equipped with special buckets for storing semen tubes and embryo cryopreservation tubes, it is convenient for sample classification, sorting and extraction to meet the needs of animal breeding. â??
4. Considering the usage scenarios of users in pastures or mountainous areas, the liquid nitrogen tank may be subjected to shock or vibration during sampling, handling, and transportation. The liquid nitrogen tank is equipped with a protective cover to prevent bumps during use. â??
Therefore, the livestock semen storage tank provides good portability, a safe and stable low-temperature environment, etc. through its design features and material selection, thereby ensuring the quality and activity of semen and meeting the needs of livestock production and research.
The 65L liquid nitrogen tank with a diameter of 216mm is particularly suitable for scientific research, animal husbandry and medical industries to store biological samples such as cells, blood, and frozen semen.
Summary of advantages:
65L capacity and 216mm diameter design facilitate sampling and improve operational safety.
Equipped with 6 square shelves, the total storage capacity of frozen storage tubes reaches 2,400, and the storage plan can be adjusted according to needs.
Polyurethane foam neck plug significantly reduces liquid nitrogen volatilization, extends service life and reduces costs.
An optional intelligent monitoring system can monitor liquid level and temperature in real time to ensure sample safety.
Special transport vehicles can be equipped to facilitate sample movement.
5-year vacuum warranty and CE certification to ensure product quality and safety.
Portable liquid nitrogen tanks, with their lightweight design and easy operation, are ideal for use in laboratories, healthcare organisations and the livestock industry. Available in a wide range of sizes from 1 litre to 10 litres, the KGSQ liquid nitrogen tanks provide the perfect solution for both small laboratory sample and liquid nitrogen storage and large scale livestock frozen sperm transport.
Product Features:
Diversified capacity options: 1 litre, 2 litres, 3 litres, 6 litres, 10 litres, with various specifications, there is always one for you.
A variety of calibre design: 1 litre and 2 litre calibre is 35mm, 3 litre calibre is 50mm, 6 litre and 10 litre have 50-210mm calibre, adapting to the needs of various occasions and ensuring the safe storage of samples of different sizes.
Complete accessories: the portable liquid nitrogen tank comes standard with a locking lid, PU protective sleeve, polyurethane foam neck plug, and 3 round buckets.
Although the model is small, the storage capacity is not small: among them, the commonly used 3-10 litre liquid nitrogen tank can be placed in 6 round buckets, and the size of the buckets is about 38mm*120mm. When frozen fine tube is 0.25ml, each bucket can store about 298 pcs, the whole can be loaded with about 1788 pcs; when frozen fine tube is 0.5ml, each bucket can store about 132 pcs, the whole can be loaded with about 792 pcs. 2 litres, the size of the bucket is a little smaller, the amount of frozen fine tube is 204, 90 pcs or so.
In addition, there are.
High-strength aluminium alloy material: lightweight and durable, easy to carry, adapt to a variety of working environments.
High vacuum multi-layer adiabatic: effectively reduce the daily evaporation of liquid nitrogen, prolong the preservation time of the sample.
5-year vacuum quality assurance: our commitment to product quality, so that you can use without worry.
Technical parameters highlights:
Model YDS-2-30: static liquid nitrogen preservation period up to 30 days. (3 litre 50 is the same)
Model YDS-6-50: Static liquid nitrogen preservation period up to 63 days.
Model YDS-10-50: Static liquid nitrogen shelf life up to 98 days.
63 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
