Characteristic of Machine:
1. CE approved
2. Double laser heads, cut bidirectionally from top and bottom at the same time, with high cutting efficiency, also assure the cutting seam to be straight
3. Automatic tracing system for focus point, overcomes the barrier of surface uneven
4. Powerful software, like AutoCAD, CorelDraw, and Adobe Photoshop for unique designing.
5. Adopting imported guide rails, ballscrew transmission system, servo motor and our special designed software, insure steady performance
6. CNC operation, with high cutting speed and accuracy
7. Exhaust system to keep the working condition free of smoke pollution
8. Can cut max. 25mm thickness, especially perfect performance on 20mm plywood
9. With our multi-function bending machine, can realize the full automatic process of template making.
Technical Parameters
Model of Machine :HLD1208
Valid Size (mm) :1200*800
Laser Tube Type :CO2 Sealed Laser Tube
Laser Power :300W
Cutting Speed :0-200mm/s
Power Supply :220V 10A
Cutting Width :0.3-3mm(optional)
Max. Thickness :25mm
Color Separation :Yes
Cutting Precision :¡À0.02mm
Image Form :PLT, EPS, BMP, DXF
Control System :Movement Control Board/CNC
Transmission :ballscrew
Driving System :servo motor
Air Feed Means:air.
Product Features:
1.Laser cutting is high power density ,better controlled no-contact processing.
2.Narrow kerf,small workpiece distortion.
3.High speed:100 times faster than linear cutting
4.Small heat affected zone,good dimension stability.Flat and handsome laser-slotted without later process
5.Steady performance:as a mature laser apparatus, suitable for Mass Serial Production.
Specifications
Model :RL-LCY500-2513
Processing scale :2500*1300mm
Cutting thickness :0.2-6mm
Max output power :800W
Laser wavelength :1064nm
Pulse frequency :1-300HZ
Min.linewidth :0.15mm
Electrical source :380V/50HZ/100A
Cooling system :7p water cooling
Max cutting speed :35mm/s
Weight :3600kg.
3d dynamic focus larage-scale laser marking machine for different height
Application field
Suitable for all kinds of metal materials (including rare metal), electroplating materials, coating materials, spraying materials, plastics, rubber, resin, ceramic and so on.
Technical parameter
Laser generator Different types of solid laser generator
Laser power Selectable from 50w to 200w
3d dynamic marking area 100mm¡á100mm¡ª500mm¡á500mm
Origin of galvo Germany
Height different 0-350mm
Focus distance measuring system Laser focus distance measuring system
Marking responding time every 5mm height different ¡ü1.5s
Positioning marking precision 0.01mm
We goldenlaser can supply you laser engravers with high quality and resonable prices
Our machines is widely used in manufacturing, such as textile industry , tag trade.
We can not only offer you the equipments but also can bring you the best after-sale services.
We can design and produce machines by ourselves so that there is always a laser system which can satisfy your needs.
Performance
H13 die steel has excellent heat strength and hardness, high abrasive resistance and toughness, good hardening properties; high dimensional stability at heat treatment, also pretty good property of resistance to cold and hot fatigue.
Applications
Used for making hot squeezing mould, forging mould, hot extrusion dies, heat-resistant steel .
Nude packing or packed with steel wires
1851 Wood Working Machinery Tools Suppliers
Short on time? Let Wood Working Machinery Tools sellers contact you.
Very good toughness by ESR treatment, bear higher temperature with good cutting and smoothing natures to safeguard its long usage; Applied in aluminum, zinc and copper-based alloy pressure and forged moulds or other hot forged moulds like shear blades, smoall size steel is the ideal material for making mandril and ejector sleeve as well as for making frequently used plastic moulds.
Very good toughness by ESR treatment, bear higher temperature with good cutting and smoothing natures to safeguard its long usage; Applied in aluminium, zinc and copper-based alloy pressure and forged moulds or other hot forged moulds like shear blades, small size steel is the ideal material for making mandril and ejector sleeve as well as for making frequently used plastic moulds.
Firelogs burn much cleaner than real firewood. They typically produce 70 percent less particulate matter, 85 percent less carbon monoxide and 50 percent less smoke. ... These firelogs produce a significant amount of heat per pound and they are a good use for waste sawdust from wood mills and other woodworking companies.
Partial discharge comprehensive analyzer is the dedicated product to measure and analyze the insulation ability of electrical equipment. This system adopts modern electronic and computer integrated technology with the functions of signal amplification(analog signal, electronic signal, digital signal), filtration, data sampling, data processing, figure display, test report generation automatically so that it may finish the measurement, location and analysis of the partial discharge.
Product description
Partial discharge inspection instrument is a digital partial discharge charged detection instrument designed by our company based on years of experience in partial discharge measurement. It adopts two emerging technologies, ultra high frequency (UHF) measurement and ultrasonic (US) measurement. This system uses modern electronic and computer integrated technology to realize signal amplification, filtering, data acquisition, data processing, partial discharge parameter calculation, map drawing, and automatic generation of test reports, thereby completing the intelligent measurement and analysis of partial discharge. This device adopts handheld design and Wince system development; the device is lightweight, convenient to carry, fast to measure, and easy to use on the spot; it has friendly interface, simple operation, and high refresh rate; and the device has complete functions, strong anti-interference ability, and accurate measurement. This instrument has no damage to the power equipment to be tested during the testing process, and has no impact on the operation of the equipment. According to the maps obtained by the multiple detection modes of the UHF and US methods, the diagnostic analysis of the detection of insulation defects or hidden dangers of power equipment can be performed to clearly determine the operating status of the power equipment.
Performance characteristics:
Vacuum deairing with fine steel, it is easy for cutting after quenching , high hardness, good abrasion resistance , dimension stability and minimal distortion.
Applications:
It is suitable for cutting tools, such as broach, filament hammer and gauge and complex shape of cold mould, plastic mould, precise screw, etc.
Chemical Composition (%):
C 0.85¡«0.95 Si 0.40 Mn 0.90¡«1.20
S 0.030 P 0.030 Cr 0.50¡«0.80
Ni 0.25 Cu 0.30 W 0.70¡«1.2
Forging:
Oil quenching cold die has crack sensitivity,so it should not be quickly heated,it had better for a preheating in 650-750 centigrade .The temperature of forging is 1130-1150 centigrade, eventually temperature should be more than 800-850 centigrade, steel ingot take upper limit temperature.while blank forging take lower temperature.
Performance characteristics:
Cold work mould steel, quench-hardening ability, the hardness of tempering, wear resistance and strength are better than cr12.
Applications:
All kinds of cold blunt mould and tools, such as punching concave die, trimming, roll mould, steel plates,deep drawing die, circular saws, standard tools and gauge, thread rolling mould and so on.
Chemical Composition (%):
C 1.45 1.70 Si 0.40 Mn 0.40
S 0.030 P 0.030 Cr 11.00 12.50
Ni 0.25 Cu 0.30 V 0.15 0.30
Mo 0.40 0.60
Performance Characteristics:
1, Good toughness;
2, High abrasive resistance;
3, High hardenability;
4, less deformation in quenching.
Applications:
1. Suitable to make the punch dies or drawing dies which are complicated in shape and high in precision;
2. Suitable toHigh-speed punch head and cold forging dies;
3. Suitable to make the blanking dies and punching dies with a thickness.
Chemical Composition (%):
C 0.90/1.10 Mn 0.40 Si 0.80/1.20
Cr 7.50/8.50 P 0.025 S 0.020
Mo 1.80/2.0 V 0.20/0.50
Many power systems, railway systems, large-scale petrochemical plants and enterprises have a lot of electrical equipment whose internal insulation are mostly oil filled insulation type, and therefore, test on insulating oil dielectric strength is common and necessary. To meet the needs of the market, we have developed and produced a series of insulating oil dielectric strength testers according to national standard GB T507-2002, industry standard DL429.9 91 and the latest Electric Power Industry Standard DL T846.7-2004 by ourselves. This instrument, by using a single chip microcomputer as the core, can operate in full automation with high accuracy, greatly improving work efficiency and reducing the labor intensity of workers. Moreover, it is small in size and convenient to carry.
Earth ground resistance tester is a high-precision testing instrument used in various fields such as substations to test grounding resistance and related parameters.The instrument is of an integrated structure, with a built-in frequency conversion power supply module, and the output power supply is continuously variable in frequency. The frequency can be changed to 45Hz or 55Hz, the high-speed processor core is built in, and the high-end digital filtering technology is adopted, thus effectively avoiding the interference of power frequency electric field to the test and fundamentally solving the difficult problem of accurate measurement under strong electric field interference.
Performance characteristics:
Widely used cold work mould steel, belongs to ledebrite steel .Good hardenability and rigidity, excellent wear resistance; minimal distortion.
Applications:
Various tool & die, such as a variety of punching die, trimming die, steel tensile modulus, trim mold, drawing die, slot die, thread twistsilk panels, cold extrusion die, cold-cut scissors, circular saw blades, standard tools, measuring tools, etc.
Chemical Composition (%):
C 1.40~1.60 Si 0.60 Mn 0.60
Cr 11.00~13.00 V 1.10 Mo 0.70~1.20
Co 1.00 P 0.030 S: 0.030
We are the manufacturer of rail construction machinery & tools in china.like digital track gauge, wear gauge, rail clamp, torque wrench, rail drilling machine, cutting machine,rail grinding machine.
