Power Output: 550W
Max Power Voltage:44.08V
Cell Type: Monocrystalinline (182x182mm)
Number of cells: 144pcs
Dimensions: 2288 1138 35mm
Frame: Anodized Aluminium Alloy-silver
Sheet: white
Connector: MC4 or MC 4 comppatible
Cable: 0.9m
Packaging: 2pcs into one ctn box
700W portable power generator, using LiFePO4 batteries, with AC Sockets for Different Countries:
-USA Socket
-Japanese Socket
-European Socket
-UK Socket
-Australian Socket
-Universal Socket
(All sockets can be customized)
It's Plug-and-Playlike using a power bank.
Not only for outdoor activities, but also for home/work/emergency backup, etc.
Equipped with AC outlet, DC carport and USB charging ports, they can keep all your gear charged.
1.1
Description
Portable power station 1200W 1000Wh solar generator for outdoor activities
1.2
Battery Type
LiFePO4 battery
1.3
Typical Capacity
1008Wh
1.4
Typical Voltage
3.2V
1.5
Typical power
1200W
1.6
Inverter
Pure Sine Wave 1200W
1.7
Charging time
600w @2.18 hours
1.8
Charge Controller
MPPT for Higher Efficiency Solar Charging
1.9
Input Charging
AC charger=600W @2.18 hours
Car charger=13V/9A/117W @9.12hours, 24V/8A/192W@5.75hours
Solar panel=10V-60V/10A/400W@3.02hours
2.0
AC output
2 ports, 1200W
2.1
DC output
2 ports, 13.5V10A
2.2
USB output
QC18W*2, PD18W, PD100W
2.3
Weight
about 13kg
2.4
Dimension
395*190*220mm
2.5
Cycle life
ï¼?2000 times
986 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
Versions available: 20, 30amp
12/24 volt auto-work negative or positive ground
Microprocessor which is made in usa
Pwm or on/off series battery charging options
State of charge (soc) battery regulation
Battery ah setting, boost charging, equalising charging, float charging
Automatic load reconnection, manual load switch
Automatic selection of voltage (12 v / 24 v)
Temperature compensation
Lcd display: soc as a fuel gauge, all system parameters in digital value, system status as symbols
Full circuit protection, electronic fuse � field adjustable parameters by four buttons
Load control option: on/off, dusk-to-dawn, on + setting hours, setting time on/off. (for type �ii)
Real clock display
Model No. eRigid P50W
Feature for electric fence small solar panel poly solar panel 50w a grade cell for electric fence industrial application use
Product Name Rigid Polycrystalline solar panel
Maximum Power[Wp] 50
Solar Cell Poly A grade solar cell
Cell size[mm] 156*49
Cell Array[Pcs] 4*9
Cell Efficiency 18.24%
Size[mm] 650*510*25
Max Power Voltage Vmp[V] 19.08
Max Power Current Imp[A] 2.62
Open Circuit Voltage Voc[V] 22.51
Short Circuit Current Isc[A] 2.83
Net.Weight[kg] 4.00
Power tolerance[%] �±3%
NOCT[â??] 45�±2
Operating Temperature[â??] -40/+85
Temperature Coefficient Pmax[%/â??] -0.41
Temperature Coefficient Voc[[%/â??] -0.32
Temperature Coefficient Isc[[%/â??] 0.04
Maximum System Voltage[V] 1000 V
Certification CE ROHS
Surface/Backsheet Glass+Aluminum/white
Model No. eRigid P50W
Feature for electric fence small solar panel poly solar panel 50w a grade cell for electric fence industrial application use
Product Name Rigid Polycrystalline solar panel
Maximum Power[Wp] 50
Solar Cell Poly A grade solar cell
Cell size[mm] 156*49
Cell Array[Pcs] 4*9
Cell Efficiency 18.24%
Size[mm] 650*510*25
Max Power Voltage Vmp[V] 19.08
Max Power Current Imp[A] 2.62
Open Circuit Voltage Voc[V] 22.51
Short Circuit Current Isc[A] 2.83
Net.Weight[kg] 4.00
Power tolerance[%] �±3%
NOCT[â??] 45�±2
Operating Temperature[â??] -40/+85
Temperature Coefficient Pmax[%/â??] -0.41
Temperature Coefficient Voc[[%/â??] -0.32
Temperature Coefficient Isc[[%/â??] 0.04
Maximum System Voltage[V] 1000 V
Certification CE ROHS
Surface/Backsheet Glass+Aluminum/white
MPPT Solar Charge Controller
PC1800F Series (60/80/100A) (MPPT)
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
Features:
LCD display , easy to operate on LCD screen
Multi stage charging (3-stage charging , parallel charging and equalized charging function)
BTS Battery remote temperature sensor terminal
Enable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port
Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
MPPT Solar Charge Controller
PC1800F Series (60/80/100A) (MPPT)
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
Features:
LCD display , easy to operate on LCD screen
Multi stage charging (3-stage charging , parallel charging and equalized charging function)
BTS Battery remote temperature sensor terminal
Enable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port
Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Photovoltaic lightning protection combiner box Model: SDDL-6-1
APPLICATIONS:
Large-scale photovoltaic grid-connected power generation system
To reduce the wiring between photovoltaic modules and the inverter
Improve reliability
FEATURES:
Reasonably simplify wiring, beautiful and generous
Meets outdoor installation requirements
Wide DC voltage input range
Use photovoltaic special fuse
Using special photovoltaic high voltage lightning arrester
Convenient and fast maintenance
Can be customized according to customer needs, optional
TECHNICAL PARAMETERï¼?
Model SDDL-6-1
Photovoltaic parameters
Nominal working voltageUn 1000V DC
Single input short circuit current 10A
Number of input ports 6
Number of input ports 1
Lightning protection parameters
Nominal discharge current�8/20μs� 20KA
Maximum flow capacity�8/20μs� 40KA
Protection level�8/20μs� �3000V
Response time Ta 25ns
Mechanical characteristics
waterproof level IP65
Working conditions Temperature: -40 to 80,
Relative humidity: â?¤95ï¼?
Standards compliance IEC61643-1, RoHS
MPPT Solar Charge Controller
PC1800F Series (60/80/100A) (MPPT)
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
Features:
LCD display , easy to operate on LCD screen
Multi stage charging (3-stage charging , parallel charging and equalized charging function)
BTS Battery remote temperature sensor terminal
Enable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port
Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Original Manufacturer of Portable Power Generators,Solar Power Station,UPS Lighting Lithium Solar Power System., Solar Panel Battery Portable Emergency Power Station
PV 1000 Vdc 10x38mm PV fuses
A range 10x38mm, 1000 Vdc PV fuses
for the protection and isolation of
photovoltaic strings that are specifically
designed for use in PV systems with
extreme ambient temperature, high
cycling and low fault current conditions
(reverse current, multi-array fault)
string arrays. For application flexibility,
the PV 10x38mm fuse is available as
a cylindrical fuse as well as bolt-on,
single and dual PCB tab and in-line
crimp terminal versions.
Ratings
Volts 1000 Vdc
Amps 1-20 A
IR 50 kA
Terminals and conductors
Crimp connection for single, 75°C/90°C Cu Stranded 12-8 AWG
PV wire
Agency information
UL Listed to 248-19, Guide JFGA, File E335324, IEC 60269-6
(gPV), CSA File 53787, Class 1422-30 (1-15A), 20 A Pending, CCC
(1-20 A), RoHS Compliant
Features
Meets UL and IEC photovoltaic standards for global acceptance
Low watts loss performance for energy efficiency
Low temperature rise performance for more precise sizing
In-line crimp terminal version is easy to apply in wire harness construction
A range of UL 248-19 fastacting 600 Vdc Class RK5 fuses specifically designed to protect photovoltaic power systems in extreme ambient temperature, high cycling and low level fault current conditions (reverse
current, multi-array fault).
Ratings
Volts
600 Vac to UL 248-12
600 Vdc to UL 248-19
Amps 20-400 A
IR
200 kA RMS Sym. AC
20 kA DC (20-60 A)
10 kA DC (70-400 A)
Agency information
UL Listed, Std. 248-12, Class RK5, Guide JFGA, File E335324.
Photovoltaic to UL 248-19, CSA Component Certified C22.2, CE
Features
Current limitation for non-inductive circuits provides Class
RK5 current-limiting response to ground fault and short-circuit
conditions
Designed for the protection and isolation of photovoltaic systems
Typical applications
Photovoltaic systems
Inverters
Photovoltaic system DC safety switches
Recombiner boxes
Solar panel: 20w/18v——1pc
Led lamp: 3w/12v ——4pcs
Led cable: 5meters——4pcs
Mobile charging cable:five in one——1pc
Built-in battery capacity: 12ah/12v
Controller: 3a/12v
*with fm radiao and mp3 functions
1.Product: PIR Solar motion light
2.Product size:135*90*45mm
3.Solar panel: 0.66W 17% efficiency
4.LED: Power 1W, 16pcs1Watt,120Lumens,Pure white ( color can be custom-made)
5.Battery:1500MAH Li-ion polymer battery
6.Work pattern: Optical control+ infrared PIR, the sensor light can be on for 30 second one time
7.Charge time :more than 8 hours (1000W/m2 illumination standard)
8.Work time :With a full charging, can use 12 hours one night.
9.The distance and range of the light sense: Around 3-5m, 120 degree
