Find Verified Emergency Lights Suppliers, Manufacturers and Wholesalers

Product features:
1. CREE LED for light source, high efficiency, long lifetime and low energy consumption.
2. High toughed PC casing, high light transmitting PMMA for transparent part, shock & impact resistant. Passing the free drop test from 3 meters height without malfunction.
3. Marking for explosion-proof is EX ibITCT4; it is applicable to various Inflammable and explosive sites.
4. With high capacity memory-free Li-ion battery, low self-discharging rate, it can be recharged for 1000 cycles.
5. Precise construction design, IP66, usable in extreme weathers such as snowfall and rainfall.
6. Battery automatic detection, when the power is insufficient, it shifting from strong light to working light; convenient for emergency use.
7. Touch switch, it is convenient & simple to operate.
8. Intellectual circuit design, with protection against over-recharge, over-discharge and short circuit. Meanwhile having the low voltage protection: when the battery is low, the indicating light on lamp head will turn to red and then switch off the flashlight.
9. Smart and pretty, portable & wearable.

Specifications:
NO. Main parameters Unit Value
1 Power W 3
2 Working voltage V 3.7
3 Battery capacity Ah 1.8
4 Waterproof level / IP66
5 Corrosion-proof level / WF2
6 Marking for explosion-proof / Ex ibIICT4
7 Life time Battery cycles 1000
Light source h 100000
8 Working hours Weak h 12
Strong h 6.5
9 Dimensions length mm 60
Width mm 40
Height mm 30
10 Weight g 90

Emergency kit include:
1. Jump starter,
2. pulling cable
3. LED working lamp
4. Zippered carrying bag

Description

The emergency fixture with sensor works under normal supply of AC power, it has 7 adjustable levels of emergency watts(3.6w, 6w, 10w, 12w, 15w, 17w, 20w set up by SET button ). Emergency time can be 90mins, 2 , 3 ,4 , 5 ,6 hours or customized; when it works with microwave sensor, it will 100% light on when movement object gets close ( sensor distance is 3-12 meters(can be set by Jumper), and sensor angle is 120-160 degree ), and switch to 20% (default value ) twilight when movement object leaves after 5s,30s,90s,3mins(can be set by Jumper);When AC normal supply shortage, the emergency fixture automatically switch to battery power supply to keep light on. At the same time, microwave sensor still detect object movement, if no movement detected, the lighting will switch to 3.6-20w emergency. This emergency fixture with sensor can also work as led sensor fixture (remove the battery pack) or work as led normal waterproof fixture (remove the battery pack and sensor). It widely used in tunnel, Rail-way station ,Metro station, Supermarket, stair well, corridor, evacuation passage, especially parking lots.


Features

1.Adopt high-grade PC base and PC cover fitting, good quality seal for better
waterproof, high transmittance frost cover(>88%),IP65 protection rate
2.Surface mounted or hanging installation option
3.Using high brightness SMD2835 led chips as light source
4.Adopt High Temperature Ni-Cd or Ni-Mh battery pack
5.Microwave sensor dimming function
6.Emergency watts adjustable:7 levels , 3.6w-20w
7.Emergency duration :90mins, 2h , 3h ,4h… or depend on sensor occupy
8.Available in 2ft 20W, 4 ft 36W and 5ft 44W
9.Approved by CE ROHS SAA and C-tick(RCM)and AS2293.3
10.3years warranty.

Product features:
1. The light source uses SMT LED, which makes whole light more efficient, long-lasting, energy saving and low consuming.
2. With advanced engineering plastic ABS, the ground and refined casing is heat-proof and vandal-proof.
3. With PMMA, the transparent parts have high transmittance. Light is even rather than dazzling. The surface is frosted to prevent scratches.
4. With 5 level lighting modes(namely high light, working light, weak light, flashing light and stroboflash light) to adjust lighting, it can meet many needs such as lighting, walking, rescue instruction, etc.
5. With precise construction design, it is not only delicate but with good protective performance. IP65.
6. Warm white light source makes lighting more comfortable. Each unit can cover at least 15 square meters.
7. Containing magnet, it can adhere to any iron metal material.
8. Battery is charged by common port, which is simple and easy. By presetting over-charge, over-discharge and short-circuit protection, the product is guaranteed reliable long lifetime.
9. Hand-held, ceiling-mounted, magnet-adhered, it’s easy to light.


Specifications:
Main parameters Value lithium battery
1 Power W 5
2 Working voltage V 3.7
3 Battery capacity Ah 1.8
4 Waterproof level / IP65
5 Corrosion-proof level / WF2
6 Life time Battery cycles 1000
Light h 100000
8 Working hours Strong h 5
Normal working light h 10
Weak working light h 15
9 Dimensions Height mm 40
Diameter Of Lamp Cap mm 70
10 Weight g 90

Material: abs-mini626
Battery: 6v/4ah rechargeable lead-acid (110-240v) storage battery
Switch mode: off, bright, and super bright
Operating time: super bright 6 hours; bright 30 hours
Charging time: 16 hours (110-240v)
Size 160*80*220mm
Accessary: solar, car charger, usb connectors;usb 5v output, 12v car/solar charge.

* Housing: ABS plastic
• Switch mode: manual switch, low light, bright.
• Light Source: 11W energy-saving lamps (22 pcs LED); lamp life of 8000 hours, LED life of 100,000 hours.
• Luminous flux: High-light 240-260lm; low-light 100-120lm
• Current: 160MA
• Voltage: 6V
• Charging time: 16 hours (110-240V)
• Use time: 4-5 hours highlighting (lamp); low-light 30 hours (LED)
• Battery: 6V/5.5Ah (200-240V) Rechargeable Battery
• Charge mode: AC-DC (built-in adapter)
• Red: charging status; Green: full charge
• Color: Black / Burgundy
• Size: 325 * 160 * 80mm
• Product Weight: 1810g
• Protection: had let overcharge protection, automatic emergency functions.


• Carton dimension: 635*377*375mm
• Package: 12PCS/carton
• Gross weight:21.6kg
• Container:1x20gp-3838PCS
1x40gp-9292PCS.

Product name:LED flare light with strong magnet
Model ASLED-1
Power supply1pc 9v-Battery
Size(Dia.*H.):8.5*5.5cm
Color :Amber/white
Material:ABS+PS
Lamp Type:LED(12pcs contained)
Working mode:flashing
Working time: as least lasting for 48 hours..

Feature: 1)waterproof.
2)magnetic warning lights(2 magnets contained)
Application :Universal cars..
TypeOutdoor / roof emergency light
Warranty :1 year
Payment term :Paypal,Credit card,T/T,E-check..

Function:
For a vehicle breakdown, an emergency light source can help you.
--Flashing amber, for warning
-- White light, for lighting.