10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:
Interface:
Left side:
One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)
Right side:
One rs-232 console port (rj-45 connector)
One power jack
Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:
Special touch the doorbell design, no need to consider the bell service life
Led lcd display, room number by printing type technology, shorten the production cycle, but artificially error correction
Stainless steel outer frame design, don't wear
Abs fire retardant materials, improves using security
Features:
Designed for the hotel room of the hotel designed addresses doorbell, 1 road normal show "don't disturb" and 1 road "please namely clear instructions, capacitive touch screen, " doorbell switch can completely replace traditional mechanical doorbell switch. When guest host don't want to be disturbed, press room "do not disturb" switch, the doorbell display "do not disturb" indicator light, touch the doorbell button the doorbell not ring,
L press room "do not disturb" switch, touch screen "do not disturb" design backlighting be lighted, hints at please do not bother, touch the doorbell doesn't work, in the room the doorbell not ring.
L press room "please namely cleaning" switch, touch screen "please namely cleaning" design backlighting be lighted, tip room to clean up, let the waiters very clearly know room to clean up the requests.
Technical parameters:
The product model: h-lr401s
Working voltage: ac£¨220v) / weak (dc12v)
Since the consumption of power: 0.01 w
Longevity: touch infinite times use, relay contacts 10 million times
1.This converter has many features that enable it to perform in a superior manner.Among those features you will find: 2.Converter coaxial or toslink digital audio signals to analog l/r audio 3.Supports sampling rate at 32, 44.1, 48 and 96 khz. 4. 24-bit s/pdif incoming bit stream on left and right channels 5.Provides electromagnetic-noise-free transmission. 6.Easy to install and simple to oprate.
424 Converters Switches Suppliers
Short on time? Let Converters Switches sellers contact you.
Diversified interfaces including SFP+ TO SFP+, SFP+ TO XFP, XFP TO XFP,
Supports 3r (re-generation, re-timing, re-shaping)
Fiber mode converter between fiber to fiber 10gbps equipment, or fiber repeater for long distance transmission
1310nm /1550nm/cwdm/dwdm optical wavelength conversion.
Oeo for network backbone(san, lan, man)
Support 2u rack (16 channel) and standalone use
Support jumbo frame
Transmission rate:9.95gbps-11.35gbps
Support hot plugging .
Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time
Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console
They can realize the integrated management to all chassis.
Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control
Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port.
Supporting remote and local management.
With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters.
Built-in ip-based web interface.
Supporting remote and local management.
Store and forward mechanism, supporling ieeee 802.3x frame flow control for full-duplex mode
Manual ip address setting/dhcp client for ip address assignment.
Event trap and snmp trap support.
Password setting, ip setting and devices description setting through planet smart discovery utility
Choice of fiber-connector from sc, lc, wdm, multi-mode / single-mode fiber /1000base-sx / lx mini gbic module.
10gbps fiber to copper media converter for long distance transmission
Network management function web snmp console
Support dmi function for sfp+ fiber module
Support itut prescribed dwdm/cwdm wavelength
Media converter for network backbone(san, lan, man)
Support 2u rack (16 channel) and standalone use
Support jumbo frame
Sfp+ fiber module detection, utp cable length detection
Support hot plugging
Type: rj45 to/from sfp+.
Wii2HDMI, a converter for the Wii console, outputs video and audio in full digital HDMI 720p or 1080p format and supports all Wii display modes (NTSC 480i 480p, PAL 576i). With just one HDMI cable, plug and play for true-to-life video/audio effects on your HDTV/monitor.
Features:
* Video and audio in full digital HDMI format, no transmission loss!
* Supports all Wii display modes (NTSC 480i 480p, PAL 576i).
* HDMI upscale to 720p or 1080p high definition output.
* Provides advanced signal processing with great precision. Colors, resolutions!
* High quality, state of the art motion adaptive de-interlacing for 480i ,576i input.
* No power adaptor, no messy cords¡Xjust one HDMI cable.
* Hassle Free! Plug and play as you go.
Specification:
Dimensions: 34 x 73 x 14 mm
Weight: 15g
Power Consumption: below 2W
Supported Video input Mode: Includes all the display modes of the Wii console (480i, 480p, 576i)
Supported HDMI output Mode: 720P@60Hz, 1080P@60Hz
Input Connector: Wii AV Multi Out Plug x 1
Output Connectors:
HDMI Connector x 1
3.5mm Stereo Audio Jack x 1
Setups for Connecting to a TV/Monitor with HDMI Input:
1. Make sure that the Wii console is powered Off. Then insert the AV Multi Out Plug of
the Wii2HDMI into the AV Multi Out Connector in the back of the Wii console.
2. Plug one end of the HDMI cable into the Wii2HDMI HDMI output, and plug the other end to the HDMI input on the TV/monitor.
3. Turn on the TV/monitor and switch the video input of the TV to match the HDMI
input connector used by the Wii2HDMI. Then you should be able to see the Wii screen after you turn on the Wii console.
Set the Wii Video Output to 480p Mode:
Under 480p mode, the image data is double what it is under the 480i mode. Therefore,
the 480p mode can provide you with much better display quality. In addition, as long as your TV/monitor has HDMI input, it is technically compelled to support the 480p mode; and even though most of the TVs/monitors support the 480i mode, it is not the usual standard. In conclusion, 480p is a better mode for higher display quality, as well as a better solution to avoid compatibility problems with TVs/monitors. Therefore, we
strongly recommend that when you use the Wii2HDMI, you set the Wii video output to 480p mode. The detailed setups are as follows:
1. Make sure that the Wii console is powered off and that no disc is in the tray.
2. Power on the Wii console to reach the Wii Channel menu. Then, click on the "Wii" button on the lower lefthand side.
3. On the next screen, select the Wii Settings on the right-hand side.
4. From the Wii System Settings 1 screen, select the Screen button.
5. From the Screen screen, select the TV Resolution button.
6. From the TV Resolution screen, select the EDTV or HDTV (480p) button, and
click the "Confirm" button on the lower righthand side. At this point, you should have
successfully set your Wii video output to 480p mode.
VERY SMALL
NW: 0.06kg
gw: 0.08kg
7.5cm*3.8cm*1.5cm.
Introduction:
This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install.
Features:
This Converter has many features that enable it to perform in a superior manner. Among those features you will find:
1. Converts Coaxial or Toslink digital audio signals to analog L/R audio
2. Supports sampling rate at 32, 44.1, 48 and 96 KHz.
3. 24-bit S/PDIF incoming bit stream on left and right channels
4. Provides electromagnetic-noise-free transmission.
5. Easy to install and simple to operate.
Features:
* It regenerates the incoming HDMI signal by decoding and re-encoding it to a new standard HDMI signal so it can extend the transimission range without degradation.
* Extends 1080p/UXGA up to 40 meter transmission distance(lower resolution signal can be transimitted longer).
* HDCP 1.1 compliant.
* No Power, Plug and play, easy to install.
Specifications:
* HDMI is compliant with HDMI 1.3
* HDMI HDCP is compliant with HDCP 1.1
* Downward compatible with DVI 1.0 and HDCP 1.0
* Operation frequency up to 165MHz
* HDMI data rate: 1.65G bps(Single link)
* Input/Output resolution
* Cable Distance Support¡GOver 40m with twisted-pair
* Dimensions (WxHxD)¡G27 x 15 x 50mm.
* Cable Distance Support¡GOver 40m with twisted-pair
* Dimensions (WxHxD)¡G27 x 15 x 50mm.
Introduction:
The HDMI Extender over ONE CAT5E/CAT6 is a tool for extending your HDMI signal over long distances to a compatible display. Instead of using expensive HDMI cables, your existing CAT5E/CAT6 cables/sockets can be utilized to perform advanced functions like transferring Deep Color (12 bits/color) video and digital audio, with a bandwidth up to 225MHz. The HDMI Extender and receiver, over ONE CAT5E/CAT6 extender is your substantial HDMI extender tool.
Features:
HDMI 1.3, HDCP 1.1 and DVI1.1 Compliant.
* Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality.
* Cable testing showed that with 1080p resolution the HDMI input source can be 20meters away.
* When transmitting a signal in 1080p resolution the CAT5E/CAT6 operating distance is 50 meters.
* Supports XVYCC
Specification:
Frequency Bandwidth : 2.25Gbps (single link)
HDMI Transmitter Input/Output Ports: 2 x HDMI Female port/1 x CAT5E/CAT6
HDMI Receiver Input/Output Ports: 1 x HDMI Female port/1 x CAT5E/CAT6
Power Supply: 5V/1A DC
ESD Protection Human Body Model: 8kV (air-gap discharge) 4kV (contact discharge)
Dimensions (mm): 65(W) X 100 (D) X 25 (H)
Chassis Material: Aluminum
Operating Temperature: 0C ~ 40C / 32F ~ 104F
Storage Temperature: -20C ~ 60C / -4F ~ 140F
Relative Humidity: 20~90% RH (non-condensing)
Operation Controls and Functions:
1. HDMI Extender Transmitter
Front Panel
1) HDMI1:HDMI1 Input port.
2) SW: Switch the HDMI1 and HDMI2 input port.
3) HDMI2:HDMI2 Input port.
Rear Panel:
1) Power: Plug the 5VDC power supply into the unit
and connect the adaptor to AC wall outlet.
2) LED indicator: When the DC5V power on, the
Indicator will be light.
3) CAT5E/CAT6 OUT: Connect the CAT5E/CAT6
output of the transmitter with the CAT5E/CAT6 input
of the HDMI over single CAT5E/CAT6 receiver.
2. HDMI Extender Receiver
Front Panel
1) HDMI Out: HDMI output port.
2) LED indicator: When the HDMI input signal is locked,
the indicator will be light.
Rear Panel:
1) Power: Plug the 5VDC power supply into
the unit and connect the adaptor to AC wall outlet.
2) LED indicator: When the DC5V power on,
the indicator will be light.
3) CAT5E/CAT6 Input: Connect the CAT5E/CAT6 Input of the Receiver with the CAT5E/CAT6 output of the HDMI over single CAT5E/CAT6 Transmitter.
Wii2HDMI, a converter for the Wii console, outputs video and audio in full digital HDMI 720p or 1080p format and supports all Wii display modes (NTSC 480i 480p, PAL 576i). With just one HDMI cable, plug and play for true-to-life video/audio effects on your HDTV/monitor.
Features:
* Video and audio in full digital HDMI format, no transmission loss!
* Supports all Wii display modes (NTSC 480i 480p, PAL 576i).
* HDMI upscale to 720p or 1080p high definition output.
* Provides advanced signal processing with great precision. Colors, resolutions!
* High quality, state of the art motion adaptive de-interlacing for 480i ,576i input.
* No power adaptor, no messy cords¡Xjust one HDMI cable.
* Hassle Free! Plug and play as you go.
Specifications:
Dimensions:
34 x 73 x 14 mm
Weight:
15g
Power Consumption:
below 2W
Supported Video input Mode:
Includes all the display modes of the Wii console (480i, 480p, 576i)
Supported HDMI output Mode:
720P@60Hz, 1080P@60Hz
Input Connector:
Wii AV Multi Out Plug x 1
Output Connectors:
HDMI Connector x 1
3.5mm Stereo Audio Jack x 1.
Features:
* Automatic Configuration.
* Connects up to 4 HDMI / DVI displays at the same time to one video source.
* Allows simultaneous display
* Supports 720P, 1080i and 1080P resolutions.
* Works with HDMI 1.3 compliant devices.
* Works with HDCP compliant devices.
Specifications:
* Video amplifier speed: 6.75 Gbps.
* Video amplifier bandwidth: 225 MHz.
* Up to 36bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* HDMI connectors: type A 19-pin female.
* Power supply: DC5V 3A
Features:
* Automatic Configuration.
* Connects up to 4 HDMI / DVI displays at the same time to one video source.
* Allows simultaneous display
* Supports 720P, 1080i and 1080P resolutions.
* Works with HDMI 1.3 compliant devices.
* Works with HDCP compliant devices.
Specifications:
* Video amplifier speed: 6.75 Gbps.
* Video amplifier bandwidth: 225 MHz.
* Up to 36bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* HDMI connectors: type A 19-pin female.
* Power supply: DC5V 3A
Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported
Plug-and-Play installation
Support Jumbo frame (64-9216 Byte)
Support Voltage Monitor
Support full/half duplex auto-negotiation
Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port
Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T
LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX
Description:
10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM.
10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel.
Export standard packaging
424 Converters Switches Suppliers
Short on time? Let Converters Switches sellers contact you.
