Sata To Usb3.0 Converter

Features:
>> Input: Pt100/PT1000/PT10/Cu50/Cu100
>> Output signal: 4-20mA/0-20mA/0-5V/0-10V/1-5V
>> Accuracy: 0.2 (FSR%)
>> Containing linear and long-term compensation
>> Power supply5V(� 10%)/12V/15V/24VDC (8-32VDC)
>> Isolation voltage: 2500VDC (1mA, 60S)
>> Installation: DIN35 rail
>> Industrial temperature range: - 45 ~ + 85
>> Size:79x69.5x25mm
Product description:
The product is isolated Pt100/PT1000/PT10/Cu50/Cu100 temperature sensor transmitter, in industry mainly used for measuring the temperature of -200 ~ +500 . The transmitter has linear and long-term compensation, the factory in accordance with national standard Pt100 indexing table calibration, fully meets 0.2accuracy. Input, output and auxiliary power supply is completely isolated (three isolation), can withstand 2500VDC isolation voltage. Products using international standards for rail mounting DIN35, small size, high precision, stable performance, cost-effective, can be widely used in petroleum, chemical, power, instrumentation and industrial control industries.
Samples:
signal Input: Pt100,temperature range:0~100; signal output:4-20mA; power:24V
Part No.: WJ11-Z1-T2-P1-A4
signal Input: Pt1000,temperature range:0~200; signal output:0-10V; power:12V
Part No.: WJ11-Z5-T4-P2-V2
One In/One Out PT100 to 4-20mA/0-5V analog signal isolated converters/transducer/temperature converter/thermal resistance converter

This SATA 7+15 22P Female to Slim SATA 7+6 13P Male Adapter features one SATA 22-pin female power connector and a male SATA 13-pin power connector, allowing you to connect your CD / DVD drive with standard SATA 22-pin interface to 13-pin Slim SATA.

Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported
Plug-and-Play installation
Support Jumbo frame (64-9216 Byte)
Support Voltage Monitor
Support full/half duplex auto-negotiation
Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port
Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T
LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX

Description:
10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM.
10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel.

Export standard packaging

Gve(e1, g.703 to v.35, v.24 converter)

Gve(e1, g.703 to v.35, v.24 converter)
Detailed selling lead description
Features:
1) v-gve is an asic-based converter using one e1/g.703 to convert to v.35
2) can convert successive n x 64k (n=1-32) data stream into pcm signal of e1, the data rate is up to 2048kbps
3) placed in e1 frame, data user just needs necessary timeslot
4) setting timeslot is continuous and according to rate of data port
5) the data ports have v.35 and v.24/rs232c which are optional
6) the ports support external clock and become linking end line
7) v-gve satisfies the requirements of g.703, g.704&g.706 of itu
8) v-gve has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnose conveniently


Detailed product description
Features:
1) rate of data transition: n x 64kbps (n=1-31), 2, 048kbps
2) transmission mode: synchronization
3) line interface: impedance 75 ohm, physical interface bnc; impedance 120 ohm, physical interface rj45
4) transmission features: comply with g.703
5) clock: line; external
6) testing method: local analogy loopback, remote digital loopback
7) dce interface: v.35 or v.24/rs232c
8) power supply: 220v f+ 10%, 50hz; 48v dc (optional)
9) power consumption: 5w
10) volume (l x w x h): 225 x 145 x 40mm; 9" x 5.8" x 1.6"
11) temperature: 0 - 40fpc
12) humidity: 0~95%

Introduction:
This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install.

Features:
This Converter has many features that enable it to perform in a superior manner. Among those features you will find:
1. Converts Coaxial or Toslink digital audio signals to analog L/R audio
2. Supports sampling rate at 32, 44.1, 48 and 96 KHz.
3. 24-bit S/PDIF incoming bit stream on left and right channels
4. Provides electromagnetic-noise-free transmission.
5. Easy to install and simple to operate.

SPECIFICATIONS:
Signal Inputs/Output:
Input Audio : Coaxial or Toslink digital audio
Output Audio: L/R audio
Connector:
Input audio connector: Toslink. 1XRCA(Coaxial)
Output audio connector: 2XRCA R/L£©
Sampling rate: 32, 44.1, 48 and 96 KHz
Mechanical:
Size(L-W-H): 51X41X26MM
Weight (Net): 78g
Warranty:
Limited Warranty: 1 Year Parts and Labor
Environmental:
Operating Temperature: 0 to +70
Operating Humidity: 10% to 85 % RH (no condensation)
Storage Temperature: -10 to +80
Storage Humidity: 5% to 90 % RH (no condensation)
Power Requirement:
External Power Supply: 5V DC@2A
Power Consumption: 0.5 watts (max)
Regulatory Approvals:
Converter Unit: FCC,CE,UL
Power Supply: UL,CE,FCC
Accessories Adapter:
AC Power Adapter: US standard, UK standard and so on
User Manual: English Version.




Size(L-W-H): 51X41X26MM
Weight (Net): 78g.

Gve-tplus(e1/g.703 to v.35 ehernet converter

GVE-Tplus(E1/G.703 to V.35 Ehernet converter
Detaile Selling Lead Description
Features:
1) GVE-T plus can convert E1 to both V.35 interface and LAN interface
2) Bandwidth of every port can be set into N x 64kbps (N=1-31) continuous data stream, although the total bandwidth of the two ports must be no more than 31 and must be inserted into PCM time slot of E1. It supports choices of CRC4 on/off and CAS/CCS (30 & 31 time slot)
3) GVE-T plus also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N x 64kbps (N=1-31). The work mode can be either internal clock and slave-clock, or N x 64kbps (N=1-31) external clock to achieve end- linking line
4) GVE-T plus can be set up into long-range Ethernet Bridge from V.35 to LAN interface
5) GVE-T plus has two transmission modes to choose from: data and image
6) GVE-T plus has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test
Detailed Product Description
Ethernet features:
1) LAN table: 10,000 automatic learning and updating
2) Filtering and forwarding: 30,000 frames / second
3) Buffer size: 64M
4) Throughput delay: 1 frame
5) VLAN: comply with 802.1Q
LAN feature:
1) Standard: conforms to IEE802.3 / Ethernet
2) Work mode: full duplex / half duplex
3) Data rate: 10Mbps
4) Physical interface: 10 BaseT (UTP), shielded RJ-45
5) WAN E1 / G.703 feature:
6) Line transmission rate: N 64Kbps (N=1-31) 2048Kbps
7) Line coding options: HDB3
8) Format of line frame: G.703 (framed / unframed)
9) Line interface: BNC; RJ45
Transmission features:
1) Comply with G.703
2) Rate of data transmission: N 64Kbps (N=1-31)
3) Transmission mode: synchronization
4) Data interface: V.35 or V.24 / RS232C DCE
5) Clock: master clock; slave clock; external clock
6) Testing methods: local analogy loopback test; remote digital loopback test


Feature:
1) Power supply: 220VACf+10%, 50Hz 48V DC (optional)
2) Power consumption: 5W
3) Volume: 225 x 145 x 40mm; 9" (L) x 5.8" (W) x 1.6" (H)
4) Temperature: 0 - 40fpC

Scunoe video digital fiber converter transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / ethernet /telephone / dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in alications where the cameras have p/t/z capabilities. Plug and play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. Led indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation , which is suitable for different working environment .

Product characteristics

1. 8-bit digitally encoded and non-compression video transmission
2. Directly compatible with ntsc, pal, and secam cctv camera systems and support rs-232, rs-422, and rs-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible pal, ntsc and secam video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range , no electrical or optical adjustments required .
8. Special asic design .
9. Industry-grade of operating temperature from -10 to 75 , which is alied to the different working environment
10. Hot-swap function
11. Stand-alone type or card-type installed in 19í»í» 2u or 4u rack-mount chassis.

Operating voltage: dc5v (we will offer external ower suly from ac96-240v to dc5v for each unit)

Operating temperature: -10 to +75
Storing temperature: -55 to +85
Humidity: 0 to 95% non-condensing

Application :

Intelligent transportation system
Connection of sub-network for surveillance center
Public security surveillance
High way & toll station surveillance
Industrial closed circuit television surveillance

Media converter

Two 10/100m electrical ports, one single-mode or multi-mode optical port
Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions.
Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability
Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly
Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps
Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted
Supports management based on web, snmp, telnet or local console
Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found)
Supports llcf(report the disconnected alarm message to local network administration)
Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management
Supports open or close electrical and optical ports through via the far end network management
Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp
Physical property:
Input power: ac 100v~220v or dc 48v
Dimension: 191mm x 110mm x 25mm
Environment requirements:
Operating temperature: 0¦-50¦
Storage temperature: -40¦-70¦
Environment humidity: 5-90%(non-condensing)


Export carton with inner box

10/100/1000M Media converter

1550nm SM SC 40KM with external power supply

Features:

Supporting : Full duplex and half duplex transmission and capable of automatic negotiation.
efficient built-in switching core ,to implement flow control and reduce broadcast packets.
Supporting : The transmission of extra-long packets over VLAN.
Supporting : The selection of multiple types of fiber ports such as dual-fiber multi-mode.
dual-fiber single mode and single fiber single mode, to satisfy the extended requirements of users.

Parameter:

Parameters Specifications
Access mode 10/100/1000Mbps Gigabit Ethernet
Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength 850nm/1310nm/1550nm
Transmission distance Dual-fiber multi-mode: 220m (fiber size: 62.5/125¦m)/550m(fiber size: 50/125¦m)
Dual-fiber single-mode: 10/20/40/60/80/100/120Km
Single-fiber single-mode: 10/20/40/60/80Km
Category-5 twisted pairs: 100m
Port One RJ45 port: Connected to STP/UTP category-5 twisted pairs
One fiber port: dual-fiber multi-mode SC (fiber size: 50,62.5/125¦m) Dual-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m)
Single-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m)
Conversion mode Medium conversion
Delay <10¦s
Bit error rate <1/1000000000
MTBF 100,000 hours
LED POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted pair connection 1000M), TP LINK100 (twisted pair connection 100M), TP ACT (twisted pair packet forwarding action)
Power AC220 0.5A/DC-48 (builtin)
Power consumption internal power supply or external power supply: AC100 265V / DC5V
Operating temperature -10~55
Operating humidity 5%~90%
Storage temperature -40~70
Storage humidity 5%~90% (non-condensing)
Dimensions 26mm(H)*70mm(W)*98mm(D) (height*width*depth) (builtin power)
120mm(H)*24mm(W)*78mm(D) (depth*width*height) (module card)


Ordering Choice:

Model
Working wavelength
Fiber
Electrical port
Fiber model
Tx power(dBm)
Rx power(dBm)
Transmission

distance

WN-MC-210 sm-2S
1310nm
SC
RJ-45
Dual-fibe Multi-mode
-22 to -12
= -30
2km

WN-MC-210 SW-25S
1310nm FP
SC/FC/ST
RJ-45
Single modeDual -fiber
-15 to -8
= -37
25km

WN-MC-210 - SW-40S
1310nm FP
SC/FC/ST
RJ-45
Single mode Dual-fiber
-8 to -3
= -37
40km

WN-MC-210

SW-60S
1310nm FP
SC/FC/ST
RJ-45
Single mode Dual-fiber
-3 to 0
= -37
60km

WN-MC-210 SW-80S
1550nm DFB
SC/FC/ST
RJ-45
Single modeDual-fiber
-8 to -3
= -40
80km

WN-MC-210 SW-100S
1550nm DFB
SC/FC/ST
RJ-45
Single mode Dual-fiber
-3 to 0
= -40
100km

WN-MC-210 SW-120S
1550nm DFB
SC/FC/ST
RJ-45
Single mode Dual -fiber
0 to 3
= -40
120km

WN-MC-210 SB-25A(B)M
1310/1550nm FP
SC
RJ-45
Single mode single-fiber
-13 to -8
= -36
25km

WN-MC-210 SB-40A(B)M
1310/1550nm FP
SC
RJ-45
Single mode single-fiber
-8 to -3
= -36
40km

WN-MC-210 SB-40A(B)M
1310/1550nm DFB
SC
RJ-45
Single mode Single fiber
-10 to -5
= -36
40km

WN-MC-210 SB-60A(B)M
1310/1550nm DFB
SC
RJ-45
Single mode Single-fiber
-5 to -3
-36
60km


24x13x15cm ; 0.5KG/pc; 40pcs in 54x37x26cm cartons.