Power supply: 110/220V
Location Theory: Thrust Line
Means of Communication: Bluetooth communication / Cable transmission
Measurement: CCD digital image measurement
Signal Processing: DSP
Range Precision Accuracy:
Total Toe 400.02
Single Toe 200.02
Camber 140.01
Caster 200.04
Kingpin Inclination 200.04
Thrust Angle 100.01
Setback 100.01
Inclusive Angle 400.05
Tread Width 2.2m1mm
Wheelbase 3.6m1mm.
Function:
1.Four-point manual/automatic ROC optional features
2.1420measuring range of kingpin optional features
3.With A4A6A8 and B5 toe curve special measurement and adjustment software
4.Operation with Chinese timely reminder
5.With the new data increasing menu
6.New wave filtering technology to enhance the stability of device
7.With data memory function£¬supporting to measure and adjust the camber in the vacant state
8.CCD permits measuring at a large range and automatically measures Kingpin parameters
9.The host computer and measuring head, with dual electronic level settings, can monitor the
level of measurement state of measuring head all the times, and ensure accurate measurement data reliability
10.With measurement function of tread difference, wheelbase difference and declination axis
11.Supporting the function of swapping measurement head and calibration-free
12.With measurement function of unit rod and dual rod
13.With customer file database, can renew and access to the customer information, It's useful
for users to manage customer's resource
14.Improved circuit design, using environmentally friendly batteries, can be used continuously for 5-8 hours
15.The head and computer, with dual operating system, can realize that synchronization purpose of ¡°up¡±and ¡°down¡± is up to you completely.
Image acquisition: A digital camera
Signal Processing: DSP
Measuring system: 2 group industrial camera, four goals reflex plate and special software
Measuring principle: The camera takes a candid photograph of the dynamic car wheel, car body and level surface on the speed of 0.5 seconds/times. The geometrical image will be contrasted with a predetermined standard image, and then got the four-wheel location data through calculation formula.
Measurement methods:
1. got a complete measurement through lifting vehicles
2. All the measurements completed through moving vehicles
3. The static measurement (not open)
Help system:
1. Built-in help operation software, help users grasp and used correctly
2. Built-in 3d adjusts software, help users adjust and repair the chassis fault effectively and quickly.
3. Guide menu, easy to find the models data.
Stable accuracy:
1.The stability of 3D product has been raised with his simple structure, advanced technologies, non light, temperature disturbance and non hidden faults of electronic, circuit, batteries of traditional four-wheel alignment.
2. Measurement precision of 3D is more stable and reliable with non requirements of the accuracy for clamp, rims and lift platform.
3. Non 0 points shift in 3D product, so only one calibration for forever use.
RangePrecision Accuracy
Total toe 200.02
Individual Toe 100.02
Camber 90.01
Caster 200.04
KPI 200.04
Setback 50.01
Thrust Angle 50.01
Track width 2600mm0.5mm
Wheelbase 3800mm0.62mm
Voltage 110/220V.
Image acquisition: A digital camera
Signal Processing: DSP
Measuring system: 2 group industrial camera, four goals reflex plate and special software
Measuring principle: The camera takes a candid photograph of the dynamic car wheel, car body and level surface on the speed of 0.5 seconds/times. The geometrical image will be contrasted with a predetermined standard image, and then got the four-wheel location data through calculation formula.
RangePrecision Accuracy
Total toe 200.02
Individual Toe 100.02
Camber 90.01
Caster 200.04
KPI 200.04
Setback 50.01
Thrust Angle50.01
Track width 2600mm0.5mm
Wheelbase 3800mm0.62mm
Voltage 110/220V
Power supply: 110/220V
Location Theory: Thrust Line
Means of Communication: Bluetooth Communication Measurement:CCD digital image measurement
Signal Processing: DSP
Functions:
1.With the A4A6A8B5 special toe measurement and adjustment software
2.Quick-type positioning system, optional measurement of the process and positioning the
way, the quickest way to just 6 seconds
3.There are 20,000 Chinese and foreign models vehicles models database, and are free to upgrade
4.Can automatically switch to Kingpin measured parameters, without E-corner disc
5.Supported in lifting the state of the next adjust camber function
6.Can measure tread difference and wheelbase difference
7.With tips and guide operating system
8.The level of built¨Cin electronic device, and has prompted the level of error function
9.The measuring head can be interchangeable and calibration for free
10.Test head with self-diagnosis function and electronic clear.
RangePrecision Accuracy
Total Toe 200.03
Single Toe 100.03
Camber 100.02
Caster 100.04
Kingpin Inclination 100.04
Thrust Angle 90.02
Setback 90.02
Tread Width 2.2m1mm
Wheelbase 3.6m1mm
KWA-300 3D Wheel Aligner is a precision measurement instrument designed to measure the wheel alignment parameters and compare them with the specifications provided by vehicle manufacturer. It also gives instructions to the user for performing corresponding adjustments so as to get the best steering performance and reduce tire wear.
Functions and Features
Complete test: The KWA-300 3D Wheel Aligner can be used to measure the most wheel alignment parameters, such as front wheel toe-in, front wheel camber, caster, Kingpin inclination, maximal steering angle, thrust angle, toe-out on turns, rear wheel toe-in, rear wheel camber, thrust angle, wheelbase difference, tread difference, etc.
Brand new 3D computer vision measurement: Automatically test the aligning angles with high performance camera.
Positive targets: There are any electronic elements inside the targets, and no cables between the targets and the main unit, so the targets are easy to be fastened on the wheel clamps.
Provides many kinds of auto test processes and diagram operating interfaces, very simple and clear to operate; The whole test process can be performed automatically, and there are some humanity tips on the corresponding interfaces.
Complete databank: Wheel alignment data of over 20, 000 vehicle models is stored in the system. User can also add new data to the databank.
Automatically record the history data, easy for customer measurement.
Standard printer to print test result.
Provide real-time help with help system.
20 Automobile Wheel Balancers Suppliers
Short on time? Let Automobile Wheel Balancers sellers contact you.
1. High-Resolution 8 sensors CCD (Charge-Coupled Device) Measuring System.
2. DSP High-Speed Processor. Highly integrated microprocessor provides immediate response between changes in actual measurement and displayed values.
3. Cordless XF-Radio technology Provides Extended Range, High-Speed Communication; Cables Connection also provided.
4. Rugged, Lightweight Design. Integrated electronic components enhance reliability. Outer sensor cover is made of special material, light and strong.
5. Cal-Check Toe Calibration. Sensors feature rear toe arms for total around-the-car toe calibration checking. Continuous checking ensures accurate toe measurements.
6. Level Reminder--Electronic level. An on-screen display indicates if sensor leveling is required.
7. Range Finder. Range Finder feature calculates track width and wheelbases up to 210 inches (5334 mm).
8. Continuous Runout Compensation. Each sensor allows for an easy, precise 4-point ROC Technology, which ensures that the sensor will continue to read accurate alignment angles, even if any wheels rotate.
9. Self-Centering Wheel Adaptors cover an extended range of vehicles.
10. Measuring Head is Self-calibrated to maintain accuracy, and can be interchanged freely without re-calibration.
11. Rechargeable Batteries can provide two days of continuous operation; í¦Hot-swappableí¦ operation ensures compensation measurements are not lost in the event of a power outage or if battery power is low.
12. Ultra-low Chassis Measuring Technology.
13. Multi-language: English, Spanish, French, Russian, Portuguese, Arabic etc.
14. Windows XP Operating System.
15. More than 10,000 types of Auto Specifications Database updated to 2009, including latest domestic and oversea auto models.
16. User can add new auto Models to the Database or Upgrade the database through our website.
17. Brand PC of Lenovo or DELL supported, 19" LCD Monitor.
18. User-Friendly Operation Interface, quick, precise measurement readings, easy to Operate.
19. Simple and Reliable Design, Customer own Requirements Welcomed.
1. High-Resolution 8 sensors CCD (Charge-Coupled Device) Measuring System.
2. DSP High-Speed Processor. Highly integrated microprocessor provides immediate response between changes in actual measurement and displayed values.
3. Cordless XF-Radio technology Provides Extended Range, High-Speed Communication; Cables Connection also provided.
4. Rugged, Lightweight Design. Integrated electronic components enhance reliability. Outer sensor cover is made of special material, light and strong.
5. Cal-Check Toe Calibration. Sensors feature rear toe arms for total around-the-car toe calibration checking. Continuous checking ensures accurate toe measurements.
6. Level Reminder--Electronic level. An on-screen display indicates if sensor leveling is required.
7. Range Finder. Range Finder feature calculates track width and wheelbases up to 210 inches (5334 mm).
8. Continuous Runout Compensation. Each sensor allows for an easy, precise 4-point ROC Technology, which ensures that the sensor will continue to read accurate alignment angles, even if any wheels rotate.
9. Self-Centering Wheel Adaptors cover an extended range of vehicles.
10. Measuring Head is Self-calibrated to maintain accuracy, and can be interchanged freely without re-calibration.
11. Rechargeable Batteries can provide two days of continuous operation; í¦Hot-swappableí¦ operation ensures compensation measurements are not lost in the event of a power outage or if battery power is low.
12. Ultra-low Chassis Measuring Technology.
13. Multi-language: English, Spanish, French, Russian, Portuguese, Arabic etc.
14. Windows XP Operating System.
15. More than 10,000 types of Auto Specifications Database updated to 2009, including latest domestic and oversea auto models.
16. User can add new auto Models to the Database or Upgrade the database through our website.
17. Brand PC of Lenovo or DELL supported, 19" LCD Monitor.
18. User-Friendly Operation Interface, quick, precise measurement readings, easy to Operate.
19. Simple and Reliable Design, Customer own Requirements Welcomed.
1. Thin configuration, 115mm height when no lifting, no need base installation, suit for second floor and above or mobile workplace.
2. Extra length system of platform, adjust from 1440mm to 2020mm, suit for all kinds of car repair working.
3. In-phase cylinder, with In-phase system.
4. Lifting height adjust from 115mm to 1870mm, suit for different working height.
5. Aotomatic hydraulic lock system.
6. Imported pump and electronic components which is safe and credibility.
Dual hydraulic cylinders design: Each cylinder is designed and manufactured conforming to ANSI standards
Imported oil seal for cylinder.
Overhead safety shut-off device.
Simple, convenient and reliable hydraulic system.
The structure is safe and safe while operating, with low noise.
Specifications
Model: LF-4000FP
Max. Lifting Weight : 4000Kg
Max. Lifting Height : 1800mm
Min. Lifting Height: 130mm
Voltage:220V /380V
Power of Motor : 2.2 Kw
Aluminum frame
High starting torque
4 or 6 pole
0.2 to 0.25 kw
Ie2 efficiency
Class b insulation, f on request
Single and three phase are both available
Strong and stable