YT-2000 series clear coat:
1) Medium solid
2) Double component mirror clear coat
3) Suitable for overall refinishing and panel or spot repairs
4) High gloss
5) Good chemical resistance and color retention
6) Available in kit: 5L clear coat + 2.5L hardener + 1L thinner
Outer packing: 5L + 2.5L+1L/kit/ctn
YT-8000MS standard clear coat:
1) High performance double component clear coat
2) Suitable for overall refinishing and panel or spot repairs
3) Super high gloss
4) Good chemical resistance
5) Excellent gloss and color retention
Outer packing: 4L x 6 tins/ctn, 1L x 8 tins/ctn
YT-8000HS high solid clear coat:
1) High concentrated double component clear coat
2) High gloss and high solid
3) Good gloss consistency
4) Excellent chemical resistance
5) Use with: PU-2KHS (high solid hardener)
Silver b010: 10-60um bright white pearl luster, used for plastics
Silver b011: 1--15um clean and satin luster, used for plastics and cosmetics
Silver b013: 10-60um light pearl luster, coatings and plastics usage
Silver b020: 5--25um satin luster, mainly for coatings usage
Silver b070: 50-250um brilliant prarl luster, used for plastics and coatings
Iridescent golden size range:5-25um used for plastics and coatings
Iridescent coppere red size range: 10-60um used for plastics and coatings
Iridescent blue size range:10--60um used for plastics and coatings
Iridescent green size range: 5-25um used for cosmetics plastics and coatings
Metal orange red size range: 5-25um used for plastics , cosmetics and coating
Uv varnish, uv dryer, uv ink
Jintech brand uv curing system use for curing of uv curable coating in diffrent industry such as
Printing and wood coating and electronic industry
Jinrad is registered brand for uv curable coating such as uv varnish, uv ink , etc.There are slovent
Free coating made by high quality imported raw material
Electric paint roller
Electric paint roller, rated voltage 110v, 6v dc.With extended pole(71-150cm, pp and pe material), 2m hose, 2l container, 6" roller
Kd-20b manual paint dispenser
Technical data:
Application: water or oil colorant (1-16 types)
Maximum high of can: 350mm
Metering pumps are made from stainless steel and suitable for all kinds of colorant types.
Drum capacity: 2.3 l or 1.75l (with 14, 16, 20, 24 cans is optional)
Maximum discharge rate: 2 fluid ounces (1y=29.568ml)
Accuracy: 1/192 and 1/384 fluid ounces is optional
Working power: 220v frequency: 50/60 hz
Power supply: 40w net weight: 80kg gross weight: 120kg
Case size: 1350(h) x 860(w) x 860(d)
Packing size: 1400(h) x 950(w) x 950(d)
Container loading: 30sets/20` 61sets/40 `gp 68sets/40`hq
Features of kd20b:
Double-pump and double-gauge lock ensures stability of accuracy and repeatability.
Automatic blending of rotating blades ensures equal distribution of colorant and has no deposition.
Colorant tray that can automatically rotate fix brings ore convenience for operators.
Manual control interior case support may be moved up and down easily, which provides enough space for paint dispensing of different sizes of drums.
Excellent weather resistance;
Excellent light retention and color retention. Good chemical resistance and water resistance;
With appropriate primer, good adhesion;
Fast drying, good leveling, strong covering power;
Wide range of application, good matching, can be matched with a variety of primers and used for a variety of material surface.
This product is made of acrylic resin and imported sun resistant pigment.It has high solid content,good covering power,fast drying and good weather resistance.It is more convenient to paint with special female valve and special nozzle.It can easily draw various colors and lines.
Theaoson zinc coating spray is composed of aerosol can, aerosol valve, paint liquid and propellant. This product uses bright silver powder imported from Germany. The color of the paint film produced after use has the same high-gloss galvanized color as the galvanized parts, it has the same color as the galvanized color that fades with the exposure time, so that there is no color difference in the repaired part coated on the galvanized part.
Features
High-gloss bright zinc
Color consistent with galvanized parts
Good atomization, easy to use
Application
It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts.
Base material to prepare
Clean the oil, dust and water stains thoroughly before use, and polish or spray primer on the base material if necessary.
Instructions:
Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even.
15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth.
When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 �° and spray again.
If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging.
Ending working
After spraying, it should be placed in a clean and ventilated environment for about 12 hours.
If it is not sprayed, the remaining material needs to be kept away from the light, and avoid being near fire sources.
The solution of normal problem
1. Paint film whitening: It is recommended to avoid rainy days (especially high temperature and high humidity) and the next day after continuous rain.
2. Shut up: shake evenly and spray for 3 seconds or change nozzle.
3. Spray up: low temperatures suggest using 50 â?? warm water to heat up, one-time finish spray, spray avoid angle 45 degrees.
4. Flow: use the correct spraying distance (15-25cm) and spray movement speed (30-60cm/s) to avoid a thick spray.
5. Bite bottom: remove the bottom part of the bite, fill the bottom ash, and then spray the paint after the coating is dry and flat.
Attention
Keep away from children, please work in the air. If swallowed, you should immediately cause vomiting and seek medical advice.
Spray must be kept in aerosol cans are vertical and horizontal angle of no less than 45 �°.
Flammable, pressure vessel, do not use near fire source.
The weight changes over time, which is normal, and the attrition rate is less than 2%/ year.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.
Features
High-gloss bright zinc
Color consistent with galvanized parts
Good atomization, easy to use
Application
It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts.
Instructions:
Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even.
15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth.
When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 �° and spray again.
If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.
Features
Fast drying Colorful and easy to use Full paint film and high gloss
Application
Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions.
Usage
1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed;
2.First spray on a small area of the test panel to confirm the accuracy of the selected color;
3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth;
4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again.
5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.
Features
Fast drying Colorful and easy to use Full paint film and high gloss
Application
Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions.
Usage
1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed;
2.First spray on a small area of the test panel to confirm the accuracy of the selected color;
3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth;
4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again.
5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.
1430 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
