DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Ptfe coating
Ptfe coating is made of the high qualtiy teflon / ptfe / fluorocarbon resin, which is our best two-coat system currently available, carrying super properties in non-stick, chemical resistance, corrosion resistance, high temperature-resistance, surly with great gloss and saturation. It is two-coat(top-coat &base-coat) fluorocarbon coating which can be used for the surface of aluminum and stainless steel;
Typical application: high-grade fryer / cookware / bakeware / household appliances, etc;
Specifications and properties:
Colors available: black, silver dots on black background, etc;
Solid content range%: (25-30)/(40-50) )fa 2 (base-coat/top-coat)
Cure temperature range: (150-180) /380-400 (base coat/top coat)
Cure time range: (8-10)minutes/(10-15)minutes(base-coat/top-coat)
Theoretical coverage: ( 7-8)m2/kg (base-coat) (8-9)m2/kg (top-coat) 25�8~30�8
Certificates: fda / lmbg / rohs / sgs.
Model no.: Sl-w/m
Unit price/payment: T/t, l/c
450ML 24PCS/CTN 363G GROSS WEIGHT OEM is welcome
Near Qingdao port, rich experiences on exporting dangerous goods
Shandong Saigao New Materials Co.,Ltd, located in Linyi city,Shandong province
5 production lines
90000 covering areas
100 workers
6 engineers
Wl-156 is an anionic hydroxylated styrene acrylic copolymer emulsion. It is recommended to use with amino resins for baking coatings, which requires high gloss, good hardness and outstanding solvent resistance. Biocide: CMIT/MIT 3:1 49ppm, and MIT 240ppm.
Properties
1. Excellent resistance to boiling water
2. High gloss, high hardness
3. Excellent solvent resistance
4. Excellent recoatabilit
Note:Be sure to adjust the pH of WL-156 over 7 with the pH adjustment in use.
Characteristic data* Property Value Unit Method
Appearance Translucent to milky white
Weight Solids 47�±1 %
pH 3.5-5.5 GB 6920-1986
Viscosity 10-1000 mPs Brookfield,LV,62#,30rpm,25C
MFFT 40-42 C GB/T 9267-2008
OH content 1.3 % Calculated on solid resin
Density 1.04 g/cm3 GB/T 4472-2011
Alkyd resins represent, both historically and commercially, the class of chemical compounds used in the field of paints and stains. Their chemical structure is a continuous and waterproof film which can protect surfaces from multiple strenuous agents conducting an anti-corrosive. The commercial paints based on these resins, the molecules of the structure, in particular, create strong structural interactions involving the formation of films able to cover any type of surface by protecting against aging, weather and wear. the paints made from alkyd resins have been among the first to be used in the construction industry, in particular in the production of exterior paints and enamels, and in the production of products for the treatment of surfaces exposed to particularly arduous conditions, for example various ferrous metal substrates such as structural steel, railings, equipment and machinery.
We offers alkyd resins that have achieved high functionality through modification with other resins such as acrylics, urethanes, epoxies.
Features:
Good storage stability, no ease to hydrolyze;
Environment friendly product, VOC of less than 7%;
Fast dry, and excellent gloss;
unnecessary to add drier during paint preparation;
Excellent shear stability, and can directly use for pigment paste grinding;
Excellent anti-corrosivity, and good initial water resistance;
The finished product paint has good versatility and good in-can appearance, and can replace oil based alkyd anti-rust paint, alkyd ready mixed paint, alkydenamel, etc
SE 6651 K is an hydroxyl functional acrylic resin that, when combined with appropriate aliphatic polyisocyanates, provides excellent durability and outstanding gloss retention. It should be used in solid color paints and clearcoats for vehicle refinishing and in industrial topcoats. Se 6651K is used in combination with aliphatic isocyanates it exhibits good exterior durability, good build and gloss, high end hardness and good adhesion results on metallic base coats.
1. Features
High gloss, good levelling property, high hardness, excellent chemical resistance and pigment dispersity
2. Applications
PU top coat, automotive refinishing paint, colored paint
The biggest difference between thermoplastic spraying road marking paint and common thermoplastic screeding coating material is that the viscosity and density of the coating and the construction process are different. During the construction, the molten paint is applied to the road surface by centrifugal force to form a road marking paint.
The thermoplastic spraying road marking is thinner, the construction is fast and efficient, and the durability is close to the ordinary hot-melt coating line, which makes it economically more advantageous than the ordinary hot-melt type.
Generally applicable to the old road over coating and road sections with very rough road structure.
Excellent foam control.
Improve wetting, leveling and flow.
Resist Moisture.
Impart slip and gloss.
Help prevent pigment seperation.
Suitable for use in industrial wood coatings, interior and exterior paints, inks and overprint varnishes.
Introduction:
Control the actual thickness of dry film or wet film by the precise test of coating.
The coating with excellent consistency and repeatability is required when
doing the coating opacity, wear-resistance, sag-resistance performance and other.
Technical Specification:
High grade stainless steel
C- Sharp design
Film Width: 80 mm
Overall Length: 90 mm
Order Information:
BEVS 1802/ 1: Two Sided Applicator 80 mm film width gap size 25&50um
BEVS 1802/ 2: Two Sided Applicator 80 mm film width gap size 75&100um
BEVS 1802/ 3: Two Sided Applicator 80 mm film width gap size 150&200um
BEVS 1802/4: Two Sided Applicator 80 mm film width gap size 300&400um
Introduction:
BEVS bar applicator is a fully new generation technology against traditional wire bar, ideal for the application of inks and coatings onto flexible materials such as paper, card, textiles, leather, automatic film applicator and etc.
The wet film thickness applied is controlled by the area of the groove between the coils of bar,the minimum thickness can be reach to 6μm.
Feature:
Not peel off
Easy to clean
Apply to 6μm
Technical Specification:
Excellent stainless steel bar : diaÃ?10mm
Introduction:
This small, portable instrument is made for measuring
the gloss of curved surface, samll pieces ,specially
shaped surface of small products, application in the
area of coatings, automobiles, toys, furniture, plastics,
banknotes, teeth, ceramics etc.
Introduction:
BEVS Automatic Film Applicators are made with high precision machined components, sturdy mainframe and heavy duty power train assembly, to ensure long term reliable operation. Consistent drawdown conditions such as speed, flatness, combined with applicator gap and geometry are essential elements to obtain perfectly reproducible samples, eliminating human error and uncertainty
Electrically Heated Vacuum Bed
BEVS automatic vacuum applicator is also available with an electrically heated vacuum
bed. The bed temperature can be set from ambient +5°C to + 150°C and temperature is
uniform over the whole bed.
Minimum temperature: Ambient +5ºC
Maximum temperature: +150ºC
Temperature accuracy: 1ºC
Order Information:
BEVS 1811/1 Automatic Film Applicator (with glass bed)
BEVS 1811/2 Automatic Film Applicator (with vacuum bed)
BEVS 1811/3 Automatic Film Applicator (with electrically heated vacuum bed)
1419 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
