Unique features:
1.Whole body alloys line
2.Twin screw extruder + single screw extruder -- much lower cost maintenance (old type is two single screw extruders). Because the modular construction of twin screw extruder.
3.High output.
Specifications
Xps board production line
Excellent insulation
Twin screw extruder
High output
Plastic processed:xps
It is a new model for installation and maintenance of highway anti-collision guardrail post and beam newly developed according to usersf+ needs. (the equipment has obtained the national patent, no.: zl 01 263422.0). The functions of this product are the same as njj series truck-mounted pile drivers. It adopts independent diesel engine as its driving force. The driving speed is 40-60 km/h. The equipment integrates pile driving and pile extracting, with 240fp rotating device. The equipment does not need turn the direction during driving and drawing the guardrail post on both sides. The equipment can operate independently when separated with the chassis, can adjust the hydraulic driving directions. It is equipped with brake device which is safe and reliable in operation.
Main technical specifications
Type of hydraulic hammer Tdb180 Tdb230
Size (lf+wf+h) Mm 4200f+1800 f+2800 4200f+1800 f+2800
Engine power Kw 16.2 20
Radius of gyration Mm 2100 2100
Lateral distance Mm 860 860
Highest working height Mm 4680 4680
Working pressure Mpa 16 16
Pile extracting force Kn 78.4 96.5
Impact frequency Hz 5.8-13 10-15
Working height of hydraulic hammer Mm 700-3000 700-3000
Speed Km/h 40-60 40-60.
It is a new product developed by us. The product claims good mobility, low oil consumption and reliable brake system. The cab can hold 5 persons, with air conditioning device and can carry installing and repairing materials such as guardrail posts and beams of around 2.5 ton. The chassis of the truck mounted pile driver is isuzu brand vehiclef+s chassis. Special mounted equipment is national patented product, the patent no. Is zl 01 263422.0. The special hydraulic equipment has appropriative tools, which can do pile driving and pile extracting for guardrail post easily, with turning around of 240fp, so that it is unnecessary to turn the direction of the truck-mounted pile driver when driving and drawing the posts on both sides. With the characters of easy operation, convenient repairing and good reliability, the product can greatly reduce the working strength, improve the installing and maintenance quality and speed, thus being the best product for installation and maintenance of highway guardrail post and beam. The product has been widely applied to the dozens of highway in the country; all these products are quite welcomed by users.
Main technical specifications
Item Unit Njj5071tqx Njj5072tqx
Type of chassis Nkr77lllwcjay Nkr77lllwcjay
Weight Kg 4300 4350
Max. Weight Kg 6500 6550
Max. Load Kg 2200 2200
Person capacity Person 5 5
Size (lf+wf+h) Mm 6250f+1880f+2850 6250f+1880f+2850
Max. Speed Km/h 95 95
Rated power Kw 96 96
Rotating speed R/min. 2999 2999
Working pressure Mpa 16 16
Pile extracting force Kn 78.4 96.5
Working height of hydraulic hammer Mm 700-3000 700-3000.
The product is mainly applied to repair the crashed and wave shape guardrail beam of highway through 6/7/8/9/10 rollers and accessorial equipment to carry out the reshaping and recovery of guardrail beam of highway, avoid the crook or twist of guardrail beam, thus enabling them to be reused. This is the most perfect equipment in the world with stabilizing performance, easy operation, economical and high efficiency.
Main technical specifications
Rectifying speedtheoretical speed: 3-5m/min.
Roller diameter++80 mm
Roller quantity6/7/8/9/10
Rated power30 kw
Rated revolving speed132-1320 r/min.
G.W.5000 kg
Size of working platform450f+500f+4000 mm
450f+500f+2000 mm
Working circumstanceheight above the sea levelfn1500m
Temperature of circumstance:-20f+f++45f+
Relative humidityfn98%.
Rimmca stf 20 is a fast, hand-set floor-slab formwork system which is made up of several basic components. You can form every slab thickness, every layout and every height with rim stf 20. The system allows for large spans, and this reduces the number of parts that have to be moved. Rim stf 20 thus represents efficient working in any type of requirement.
High load-bearing capacity
Large spans reduce the number of parts, it can be optimised for all slab thicknesses and geometries through the selection of the girders and girder combinations
Cost-efficient
Depending on the prop type, fewer girders and props, the economic choice due to cost-efficient components that can be used again and again
Adaptable
Adaptable to any layout and floor extension thanks to the overlapping of the girders, it owns perfect adaptability to walls and columns.
Freely selectable
Plywood and props can be chosen depending on demands and requirements
Rimmca professional technical team and perfect after-sales service is committed to give you the best experience
Rimmca table formwork ttf 20 adapts to any slab type. It is perfect for projects in building construction with high demands for finishing quality, safety and efficiency.
Perfect adaptability
Greatest stability and load capacity guarantee rim ttf 20 can meet all geometry of the structure, it can also be used as cantilevered edge with bracing
Lower labour cost
Rim ttf 20 is easy and practical to set up and can be shifted and adapted very quickly.This makes them a cost-effective and efficient way of carrying out large-area slab projects
Convenient
Fast moving from floor to floor in horizontal position with transportation trolley and comfortable transportation with fork in vertical direction
Rimmca professional technical team and perfect after-sales service is committed to give you the best experience
Rimmca climbing formwork cb180 & cb240 provides safe working conditions with wall formwork at all heights. The well thought-out design combines easy handling with a fast moving procedure and problem-free adjustment to suit different building shapes.It's extremely easy to set up , and can be tailored to meet a wide range of different requirements.
Strong
High loading capacity of the brackets allows the formation of large scaffold units
Flexibility and time-saving
It is a cranelift climbing formwork for structures of any shape and inclination.By turning pressure, spindles, the climbing formwork cb240 & cb180 can be perfectly accommodated to structures whose inclination varies from one-cycle to next.
Safe
Wide work-platforms with plenty of space for fast, safe working
Completely free of tripping hazards in front of and behind the formwork because of the wind bracing
Adaptbility
Rimmca wall formwork vtf 120 adapts to various kinds of projects asking for different thickness , height & shapes of walls, like power plant, tower and apartment etc.
Safety
Rimmca not only provides you well-made products but also optimized and individualized solutions, avoiding the trouble back at home.
Cost-economical
Rim vtf 120 is a simple and efficient formwork system which most of the members can be re-use recycles.Short forming times and large optimized units can save your labour and time.
"single side formwork ssf " enable the concrete forces to be safely transferred. Its max pouring height can be up to 8.0m high.
Advantages
1.Tensile forces are reliably transferred by means of diagonal anchors.
2.Modular vertical stacking facility. Optimum adaptability to the required pourheight¡, from 4.00 m up to max. 8.0 m
3.Adapts to uneven ground by means of spindles with articulated footplates
4.Adjusting for the different fresh-concrete pressures required is easy and economical¡§csimply increase or decrease the spacing between the supporting frames, as appropriate
5.The high-speed repositioning can be by crane or by traveling unit on rails or rollers.
Scaffolding pipe in hot dip galvanized and black
Outer diameter 48.3mm/60.3mm or others
Thickness 4mm, 3.2mm, 3.0mm or others
Lengther: 6m, 21'or others
Conform to bs 1387/en39 standard
04. Pressed double coupler (fixed clamp/fixed coupler), bs 1139 standard / en 74
05. Pressed swivel coupler (swivel clamp/swivel coupler) bs 1139 standard / en 74
06. Pressed putlog coupler, bs 1139 standard / en 74
07. Drop forged fixed girder coupler, bs 1139 standard / en 74
08. Drop forged swivel girder coupler, bs 1139 standard / en 74
09. Sleeve coupler, bs 1139 standard / en 74
10. Base plate, size 150 x 150 mm
11. Metal plank dengan ukuran panjang 2 sampai 4 meter, lebar 25 cm, tinggi 4 cm, tebal 1, 2 mm, ss 280 standard
12. Drop forged double coupler, bs 1139 standard / en 74
13. Drop forged swivel coupler, bs 1139 standard / en 74
14. Inner joint pin
15. Stair thread coupler
16. Putlog head
17. Oyster coupler
18. Board retaining coupler
19. Ladder clamp
20. Roofing coupler
21. Toe end clip
22. Supa tie coupler ii
23. Locking pin
24. Fencing coupler
25. C-clamp fixed coupler
26. C-clamp swivel couple
Ringlock scaffolding ladder bracket
1.System scaffolding ladder bracket is 17?/430mm wide,or 14",with forged half coupler assembled,compatible with cuplock and ringlock system scaffolding and ladders of 3',5',10'
2.The bended sheet is 50mm wide,6mm thick
3.M12 nut and bolt and Grade 8.8
4.Surface finish:hot dip galvanized,painted,etc.
5.Package:steel pallet
6.The size of the ladder bracket can also be produced as customized
7.High quality and fast delivery
8.3',5',10' steel ladders and other system scaffolding components are well supplied,too
9.Usually two ladder brackets are needed to fix the ladder and the scaffolding tubes.
Right Angle Wedge Clamp
1.Made of high tensile strength steel bar Fusion Welding increased the strength Wedge lock is easy to use 2.Hot dip galvanized for long service life.
3.Connecting two tubes at right angles.
4.A coupler in which the clamping force on the tubes is provided by tightening the flaps aroundthe tube and by menans of hammering home a wedge.
5.We can carve any marks, if you need.
41 Building Construction Machineries And Equipments Suppliers
Short on time? Let Building Construction Machineries And Equipments sellers contact you.
