Can be applied directly on rusty steel( rust layer ¡ü45um)!
Color and appearance: grey or others
Coating thickness um: 50¡à5mm
Solid content % : 69¡à3%
Overcoating interval: minimum: 4 hours max: unlimited
Recommended substrate conditions and temperature:
1.Remove all oil or grease, soluble contaminants and other foreign matter. All surfaces to be coated should be clean, dry and free from contamination.
2.If applied on the rusty surface, the rusty layer thickness should be below 45 um
3.Apply in good weather, don¡¯t let coating contact any liquid like water or other solvent before completely dry. No painting be carried out in rainy day outdoor , if the humidity is above 85%, please stop painting
4.The temperature of substrate should be above 5¡ãc, lower temperature might not dry or cause a long time to dry
Air spray:nozzle orifice: 1.5-2.5mm
Nozzle pressure: 0.3-0.5mpa
Airless spray:nozzle orifice: 0.4-0.5mm
Nozzle pressure: 12-15mpa
Brush : use soft bursh
Recommended finish: rsl series finish
Shelf life: 12 months
Over coating time
Substrate
Temperature 5¡ãc 15¡ãc 25¡ãc 35¡ãc 45¡ãc
Minimum interval 24hrs 7hours 4hours 3hours 2hours
Maximum interval Unlimited storage temperature : 5-30¡ãc in well ventilated warehouse
Ature:remove all oil or grease, soluble contaminants and other foreign matter
All surfaces to be coated should be clean, dry and free from contamination
If applied on rusty surface, rusty layer thickness should be below 50mm, other than bottom surface processing requirements, without acid and sandblasting processing, catalytic reaction, to get black protective layer and solvent (acrylic acid, polyurethane, epoxy resin, alkyd resin, amino paint or water-based paint) match well, will not occur and paint color bleeding
Apply in nice weather, don't let coating contact any liquid like water or other solvent before completely dry
No painting be carried out in rainy day outdoor
If above 85% humidity please stop painting
Temperature of substrate should be above 5¡ãc
Lower temperature might not dry or cause long time to dry
•air spray:nozzle orifice range: 1.5 to 2.5mm
Nozzle pressure range: 0.3 to 0.5mpa
•airless spray:nozzle orifice range: 0.4 to 0.5mm
Nozzle pressure range: 12 to 15mpa
•features:brush: use soft brush
Recommended finish: rsl series
Storage temperature: 5 to 30¡ãc in well ventilated warehouse
Stir thoroughly before painting
Don't use any steel or other metal stick to stir paint
Sea-ion 316 is specially designed for recycling disk. It can remove the uv glue, metal reflecting layer, dyestuff and printing ink quickly and thoroughly. The product is non-toxic and inodorous. Its quality is stable. Cooperate with the sea-ion process technology; it is a necessary product for waste disk recovery processing enterprises. No damage to substrate material, high recovery rate, after cleaning, the pc is transparent & bright, high added value. No need to use concentrated sulfuric acid, complete process need only one step, simple and safe. Cleaning time is short, save energy, increase production efficiency.
Our products:
1. Sea-ion 301-woven bag printing ink normal temperature detergent
2. Sea-ion 302 po/ps acidophilus milk bottle printing ink normal temperature detergent
3. Pe/pp bottle printing ink detergent
4. Sea-ion 311 bottle flake degumming agent
5. Sea-ion 312 pc car lampshade film and paint detergent
6. Sea-ion 313-pc mobile phone frame depainting agent
7. Sea-ion 315 pc nursing bottle ink detergent
8. Sea-ion 316 pc disk paint and film detergent
9. Sea-ion 317 pc eyeglass color and film detergent
10. Sea-ion 318 pc glass frame depainting agent
Spray Painting guns with integrated cascade, excellent atomization, high transfer efficiency and ultimate safety standard. There are a few models available, all of which function with stable performance, achieving excellent surface finishing result and coping with the difficulties to most competitive suppliers.
Engine foamy cleaner is a powerful foam detergent applied for cleaning the parts surface that hard to clean by general way. It can form foam on upright surface and quickly remove the dirt, oil stain and other deposit, protect parts but not damage the rubber, plastics and paint. It is safe, used easily and incombustible.
Silicone resin ingredient ensures painted films to stand integrated after exposed at 300degree for a long period of time.
Be sure to stand much higher temperature, to 600degree.
Widely used on films which will work with high temperature.
It is humidity resistant, waterproof and weather resistant.
Be sure not mix it with gasoline.
The product can effectively clear away pitch, grease and smudges on metals, wheels and auto's coatings without any damage to paints films and glass, it has feature of strongly decontaminate, easily operating effect.
Feature:
1. Extra cleaning ability
2. Recover color
3. Non-damage to paint film
Automotive Coating Primer good filling ability
1k spot primer surfacer
2epoxy 2k primer
3polyester putty
4 etching primer for the raw metallic body surface primer
we are leading professional supplier of automotive refinish products,
such as
*1k basecoat
*2k topcoat
*clearcoat
*Hardener
*Thinner
*Putty & primer
we are the professional supplier of automotive paint in China and overseas market, excellent services and high quality products will be provide to you.
We have sold our products to wide area of the world, such as Africa, Latin America,etc, .look forwarding to hearing from you soon
--Wall panel: sandwich style, δ=50mm, polystyrene .rock wool is optional.
--Door: 3 pcs of front door without aluminum side cover.
1pcs of emergency door with pressure lock.
--Exhaust fan: 1 unit of 5.5kw unilatcral centrifugal fan.
--Exhaust duct: 3m straight ducts, one 90° bend, and one 60° bend.
--Filtration: mounted at the rear wall panel.
--Roof filter: 2 pcs of filter, mounted above support frame,
which is made of steel and powder coated.
--Upper light: 8 sets, 4*40w per set.
--Control box: components made in china, overload, overheat,
phase-lacking protection, straight driven motor.
--Omni- directional movable infrared light as optional.
Technical Specifications
External size(m) 8.1x4.0x3.2
Internal size(m) 6.9x3.9x2.7
Door width (m) 3.0
Door height (m) 2.66
Air flow (m3/h) 18000
Inside on-load air speed(m/s) 0.25-0.3
Power (kw) 7
Vehicle suited Saloon car
Product Type: Coats
Age Group: Adults
Supply Type: OEM Service
Shell Material: 100% Cotton
Fabric Type: Pure Cotton
Filling Material: furcoats
Gender: Unisex
Technics: Garment Dyed
Feature: Anti-Shrink, Anti-Wrinkle, Breathable, Eco-Friendly, Maternity, Plus Size, Reversible
Place of Origin: Guangdong, China (Mainland)
Brand Name: MeiFNG
Model Number: M002-17
Style: Jackets
Product: Coat, winter jacket
Shell Material: Pure Cotton
Lining Material: furcoats
Gender: Women/Man plus size fur coat
Supply type: In stock/OEM plus size fur coat
Design type: Removable hat
Hat material: Real fox fur
Color type: As picture and changeable color by clients like
Coat version: Casual but with some more army element fur coat
Washing ways: Dry-cleaned/Not bleaching/Paving in the shade
Size Shoulder Bust Sleeve Body
S 46 100 62 90
M 48 104 63 91
L 50 108 64 92
XL 52 112 65 93
XXL 54 116 66 94
1. 1 piece in a poly bag standard packing;
2. Customized packing ways for bulk order
35CM*20CM*23CM
4.5KG/bag
