Description
Lencolo 5031D is a photoinitiator accelerator for special UV system, which can promote the reaction of various UV resins and has strong absorption for specific wavelengths (365nm-395nm). Various UV coatings and UV adhesives that can be cured by LED lamps can also be used in UV systems cured by mercury lamps to improve the surface dryness and crosslinking density of the system.
Performance
Improve the UV curing rate, have a good promotion effect on various UV, make UV curing more thorough, higher conversion rate, better bottom curing effect
It is very suitable as a photoinitiator for various LED UV systems, making the coating surface dry more thoroughly.
Enhance the adhesion to metal, glass and polymer materials, improve wear resistance
Application
Suitable for various mercury lamp UV systems, also suitable for LED UV, LED UV ink, LED UV adhesive system, UV nail polish.
Standard configuration:
1. Tension seat
2. Pushing and pulling force gauge
3. Two jaw pliers
4. Three jaw pliers
5. Tension pliers
6. Bottom fabric fixture
7. Male button fixture
8. Mother button clamp
Size: 280 * 220 * 777mm
Button tensile testing machine Button strength machine:
The purpose of this test is to define the responsibility of garment manufacturers to ensure that buttons, buttons, and fasteners are properly secured to the garment, preventing buttons from detaching from the garment and posing a risk of swallowing by infants. Therefore, all buttons, buttons, and fasteners on ready-made clothing must be tested by a button strength tester. This function performs uniform and vertical tensile testing on various buttons on clothing to check whether their firmness meets relevant safety standards
Standard: 16CFR1500.51-53, ASTM PS79-96
Operating instructions:
1. Install the fixture, cooperate with the test button, and lock the test sample onto the base tightly
2. Put down the fixture, grip the buttons tightly and pull them upwards. Each group of buttons should be able to withstand a minimum of 17 pounds of tension (7.72kg) and maintain it for 10 seconds without any signs of looseness or damage. At least 20 buttons per model need to be tested simultaneously to be considered qualified
If one of the buttons is loose or damaged, or if it is replaced, it is necessary to retest all of them
186 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
Model: DL-9929XM
Product Name: Touch Screen Linear Wear Resistance Testing Machine
Test stroke: 0-100mm
Test speed: 0-60 times/min adjustable
Test object: coating, coating, or other surface treatment
Sports mode: electric
Fixture self weight: 15g
Test load: 250g
Counting setting range: 1~999999 times
Maximum allowable size of workpiece: 220 * 160 * 50mm
Machine size: W480 Ã?? D360 Ã?? H360mm
Machine weight; 20kg
Power supply: 1 â?® AC220V 2A or specified
2. Introductionï¼?
This instrument is suitable for testing the wear resistance of products such as plastics, automotive parts, rubber, leather and textiles, electroplating, freely detachable components, paints, printing patterns, etc. It can be used to evaluate the wear resistance of products, as well as the scratch resistance (single or multiple scratches) and color transmission of products. Both dry and wet wear tests can be conducted.
Specification parameters
Test piece 16mm 615mm D
Fixture load 25N
Weight load 25N 5N
Lateral displacement of fixture 42mmroller per revolution
Sandcloth 60
Drum diameter 150mm
Drum length 460mm
Drum speed 40rpm
Travel booking 40m20m
Wear speed 032ms
Inclination angle the angle between the support axis of the 3 specimen and the vertical plane of the drum
Volume 70 30 30cm
Weight 61kg
Power supply 16 AC220V 3A
This machine complies with DIN5316 ISODIS4649 GB9867 and is suitable for wear testing of elastic materials rubber tires conveyor belts conveyor belts shoe soles soft synthetic leather leather and other materials It has the characteristics of high efficiency good reproducibility and easy operation Roller diameter 150mm roller length 460mm roller speed 40rpm wear stroke 40mm 20mm wear speed 032 msec inclination angle 3o specimen diameter 16 mm thickness 615 mm test load 5N 1
3.Technical Parameter:
Model and specification :DL9930
Drop height: 10-1500mm, any setting
Steel ball weights :55g, 64g, 110g, 225g, 535g (optional upon request)
The maximum size of the test piece is :400 * 350mm
Height display method: Graduated scale display (electrically selectable with LCD or touch screen control display)
Drop height error :â?¤ �± 2mm
Drop method: electromagnetic adsorption drop
Control and lifting methods: Electric control electromagnet, manual lifting of electromagnet fixing rod (electric lifting using motor)
Protective cage :around the protective device
Sample fixation method: fixture clamping and fixation
Drop bottom plate size :500 * 400 * 10mm
Overall dimensions of the testing machine :500 * 400 * 1800mm
Control box overall size :300 Ã?? 370Ã?? 1060mm
Motor power: 0.4KW (electric)
The net weight of the equipment is :approximately 40kg
Power supply:AC220V/50Hz
5.Configuration List
1. Main purpose:
The falling ball impact testing machine is suitable for testing the impact strength of plastic, ceramics, acrylic, glass, lenses, hardware and other products.
2.Product features:
DC electromagnetic control mode is adopted to place the steel ball under the electromagnetic chuck and the steel ball is automatically sucked up. Press the drop key, the magnet releases the steel ball instantly, and the steel ball will conduct Free fall test to accurately impact the surface of the test piece; The drop height can be adjusted up and down, and there is a height scale attached (the electric series can directly display the test height) to determine the drop height of the component.
Equipped with a laser positioning device, the impact testing position can be accurately aligned with the laser, resulting in more accurate testing results.
Compliant with standards
Test standards: JIS R3205:1989, ISO/DIS125421 12543-6:1997 AS/NZS2208:1996, GB/T9962-1999.
11 Main usage and application
Rope Tension Testing Instrument can be applied to various occasions such as power industry telecommunications industry transportation industry glass curtain wall decoration cable way industry construction industry pleasure grounds tunnel construction fishing major research institutions and teaching institutions testing institutions and other occasions involved with the tension of ropes and steel wire ropes
12 Product characteristics
It has the rope structure with tension force and can directly measure without disassembly
It has the light weight simple structure convenient operation and applies to any situations
It has the stable performance high measurement accuracy with automatic system compensation functionWhen the specification of the tested rope the same as the rope tension testing instrument rope number the measurement accuracy can reach 3 error or less within the rated measurement range
It has broader range of measurement with 19 kinds of rope diameter measuring functions
Applied rangeapplied to flexible stretched ropessuch as various steel wire ropes highstrength ropes etc
Accuracy grade 36 of maximum function depending on the rope form and features
Rope Diameter 640mm
[Scope of application] It is used to measure the tear resistance of various woven fabrics (Elmendorf method), as well as the tear resistance of thick paper, plastic cloth, electrical tape, etc.
[Related Standards] GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734, etc
Technical parameters:
1. Tear force range: A: 0-16N B: 0-32N C: 0-64N
2. Force measurement accuracy: â?¤ �± 1 graduation
3. Sample size: 100 Ã?? 63mm
4. Cut length: 20 ± 0.2mm
5. Tear length: 43mm
6. External size: 400 two hundred and ten Ã?? 395mm
7. Weight: 30Kg
The purpose of this machine is to evaluate the impact on product performance after customers may accidentally drop the product during experimental use. It is applicable to the original posture and accelerated drop test of small Consumer electronics such as mobile phones, PDAs, telephone electronic dictionaries, CDs, MP3, etc;
Function: Vacuum absorption drop, adjustable drop height, manual lifting, precise impact location, with acceleration and speed measurement
Multi angle drop device: 0 �°, 45 �°, 90 �°
Drop height indication: 1cm
Effective height of drop: 300-1800mm (optional 2000mm)
Maximum allowable weight of test piece: 2kg
Falling floor medium: steel plate
Drop range: 500x600mm
Air source used: 0.5Mpa
Machine size: W800XD900XH2200mm
Power supply: AC220V 50HZ 5A
Model: DL3020,
Stroke mm: 300 * 200 * 200,
Boundary dimension mm: 625 * 777 * 1080,
Workbench mm: 460 * 360,
Total weight (kg): 280KG,
Glass bearing capacity (kg): 15,
Z-axis lifting distance: 200MM,
Working distance: 90 mm,
Measurement accuracy UM: XY (3+L/200) um,
Resolution of grating ruler: 1um,
CCD resolution industrial grade: 800 line high-definition,
Zoom objective magnification: 0.7-4.5X,
Total magnification: 20-180 times, optional 20-220 times,
Object field of view: 7-1.1MM,
Surface light and contour light of the light source: white LED, with continuously adjustable brightness,
Power supply: 220V �± 10%, 50 Hz. Electrical equipment requires reliable grounding: the grounding resistance is less than 4 ohms,
Working environment: temperature 20 â??�± 5 â??, temperature change ï¼? 2 â??/hr, humidity 30-80%, vibration ï¼? 0.002g and lower than 15Hz,
Imager characteristics:
Utilize optical principles for non-contact measurement;
Suitable for all fields with the purpose of two-dimensional measurement;
It is the best measurement solution for small, thin, soft, and component parts;
Accurate measurement can be achieved for elements such as points, lines, circles, angles, etc;
And it has powerful report output function, high-quality, economical, and practical;
Ultra high cost-effectiveness with all functions of flat measurement.
imager: measure all plane dimensions;
Hardware, main features:
Fully cast aluminum worktable, column combination lightweight body.
Precision transmission equipment design for fast movement.
Precision P-level linear guide rail and V-shaped guide rail, with extremely high straightness,
Ensure machine accuracy and service life.
Sony Color CCD from Japan, with higher definition measurement images.
Flexible lighting with contour light, surface light, and coaxial light (optional), high clarity, and unparalleled measurement accuracy.
High precision optical ruler, every 1 micron is crucial.
Fullanti is a over 20 years experience and professional end mill manufacturer, focusing on improving and providing customized end mill, especially tungsten steel end mill. Rich Metal insists the values of a Integrity, Service, Innovation and Progress. Standing with these values, we commit ourselves to bringing the best products to our clients. We have won good reputation and strong trust from business partners in America and Europe and at domestic market. 2013 we started Rich Metal brand in international trading.
Material: Tungsten Carbide (YG,YT,YW)
Hardness: 45-65 HRC
Unit Price: negotiable
MOQ: 10pcs
108111110504 panasonic bm cutter, , a hot kind product with high quality and low cost, most of products from our company are oem;
It has a long service life, at least 3 years;our company support replacing within 7 days, and 15 days sent back fault products without any reason.
108111110603 panasonic BM cutter, plays a great important role for machine, and it is very popular in the market. Besides, it has high quality and long service life.
MPK0063 FUJI CP4 Cutter,,a hot kind product with high quality and low cost, Most of Products from our company are OEM;
It has a long service life, at least 3 years;Our company support replacing within 7 days,and 15 days sent back fault products without any reason.
WPK0240 FUJI CP6 Cutter, This kind of cutter is a kind of hot product in our company. It has been always pupular among buyers because of its high cost performance for a long time. And the product is with high efficiency of usage.
186 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
