BASFs Ultramid grades are molding compounds on the basis of PA6, PA66 and various co-polyamides such as PA66/6. The range also includes PA610 and semi-aromatic polyamides such as PA6T/6.
The molding compounds are available unreinforced, reinforced with glass fibers or minerals and also reinforced with long-glass fibers for special applications. Ultramid is noted for its high mechanical strength, stiffness and thermal stability. In
addition, Ultramid offers good toughness at low temperatures, favorable sliding friction behavior and can be processed without any problems.
Because of the manifold and tailor-made characteristics of Ultramid many applications are possible, especially in automotive construction, electrical engineering and electronics, in household technology, industrial connection, photovoltaics, in construction and installation, furniture, the sanitary industry and in mechanical engineering.
Ultramid can be processed by all methods known for thermoplastics. The main methods are injection molding and extrusion. Complex moldings are economically manufactured in large numbers from Ultramid by injection molding. The extrusion method is used to produce films, semi-finished products, pipes, profiled parts, sheet and monofilaments. Semi-finished products are usually further processed by cutting tools to form finished molded parts.
Ultradur is BASFs brand name for its line of partially crystalline, thermoplastic, saturated polyesters derived from
polybutylene terephthalate (PBT). They are employed as materials for high-quality technical components in many industry sectors.
Ultradur shows its strengths wherever high-quality and above all heavy-duty parts are required â?? for example in the automotive industry, in the electrics and electronic sectors. The range of applications which benefit from these properties of Ultradur in both industry and everyday life is vast. A feature that is particularly important is the low water absorption and thus the fact that the mechanical and electrical properties are largely independent of the moisture content or the climatic surrounding conditions. Particularly for components that are safety-relevant and have to work reliably for the entire lifetime of a component,Ultradur is indispensable.
Ultrason pellets are supplied in bags and/or octabins. The bulk density ranges between 700 and 800 g/l. Provided the packaging remains undamaged, Ultrason can be stored indefinitely. Ultrason pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least 4h at 130 C to 150 C in a vacuum or dry air drier prior to processing.
BASF PES/PESU Ultrason E 2010 HC Resins
Package:
25 kgs/bag
CYCOLOY CX7240 resin is an injection moldable PC/ABS blend. It contains non-brominated and non-chlorinated flame retardant systems to meet UL-94 V0 at0.75mm, V1 at 0.6mm, V2 at 0.2mm and 5VB at 1.5mm respectively. Excellent flow and impact balance together with the thin wall flame resistance and all coloroptions make CYCOLOY CX7240 an ideal candidate for a wide variety of thin wall applications.
1133 Plastic Products Suppliers
Short on time? Let Plastic Products sellers contact you.
he XENOY alloy is a blend of semi-crystalline polyester (typically polybutylene terephthalate, PBT, or polyethylene
terephthalate, PET) and polycarbonate (PC). The XENOY resin family offers good chemical resistance, great impact resistance even at low temperatures, heat resistance, and outstanding aesthetic and flow characteristics.
POLYFLON PTFE is composed of polytetrafuluoroethylene, the most commonly used fluoroploymer. PTFE has a very long chain molecular structure in which all of the hydrogen atoms of polyethylene are replaced by fluorine atoms.
PTFE is superior in heat resistance and chemical resistance compared with the other plastics. These properties result from stable chemical structure consisting of only carbon and fluorine atoms with the highest electro negativity.
NEOFLON FEP NP-Series
NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.
NEOFLON ETFE EP-506 is a resin for extrusion of thin coatingsof small wire sizessuch as aerospace wire, automotive wire, appliance wire, thin film and tubing, etc.. Itmay be used for injection molding of thin wall parts.
Ethylene tetrafluoroethylene copolymer is a kind of chemical substance. ETFE is the strongest and toughest fluoroplastic. It not only maintains the good heat resistance, chemical resistance and electrical insulation properties of PTFE, but also greatly improves the radiation resistance and mechanical properties. The tensile strength can reach 50MPa, which is nearly twice that of polytetrafluoroethylene.
Zytel PA
Zytel PA is a cost-effective, high-performance polyamide nylon suitable for a wide range of applications.
Zytel PA polyamide nylon is specified for a variety of uses, from car parts to protecting sensitive electronic components. Itâ??s performance-tested for strength, heat resistance, and durability.
The versatility of Zytel PA polyamide nylon has been demonstrated by its selection for thousands of applications. DuPont material science resources draw on their real-world knowledge and experience to collaborate in helping customers on new applications.
Properties of Zytel PA include:
* Excellent insulating/electrical resistance
* Tested heat, humidity and chemical resistance
* Strength and stiffness for metal replacement
* Dimensional stability
* Easy to process, good moldability
Zytel 70G25HSLR is a heat-stabilized, hydrolysis resistant, 25% glass fiber reinforced polyamide66 grade. Exhibits high
mechanical strength, excellent balance of stiffness & toughness, good high-temperature performance, good electrical as well as flammability properties
Mengyuan has a very mature PVC polymer materials, high-end materials of the original, research and development, production capacity.
We have successfully developed a series of modified PVC materials, which have excellent elasticity, flexibility, high and low temperature resistance, tensile strength, tensile strength, wear resistance and weather resistance ect.
Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI).
The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization.
Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions.
Key Features
High HDT of 207C (405F)
Superior toughness and impact strength
Exceptional long-term hydrolytic stability
Better chemical resistance than PSU and PEI
Withstands over 1,000 cycles of steam sterilization without any significant loss of propertiesInherently flame retardant
Transparent
Colorable
Typical Applications
Sterilization cases and trays
Dental and surgical instruments
Medical devices
Aircraft interiors
Airline catering trolleys
Hot water fittings
Plumbing manifolds
Food service trays
polyetheretherketone
KetaSpire KT-850 is the intermediate-flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color pellet form. KetaSpire PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity and excellent chemical resistance to organics, acids and bases.
These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses.
Solvays KetaSpire PEEK product line includes:
Neat grades (lubricated and non-lubricated)
Glass fiber and carbon fiber reinforced grades (low and high melt flow)
Wear resistant SL grades (lubricated and non-lubricated)
Natural-colored powders (coarse, fine, super-fine and ultra-fine)
KetaSpire PEEK
KetaSpire PEEK (polyetheretherketone) offers the best combination of fatigue resistance and chemical resistance, which is similar to PPS (polyphenylene sulfide). However, PEEK can operate at higher temperatures and retains its excellent mechanical properties at continuous-use temperatures up to 240 C (464 F), allowing it to replace metal in severe end-use environments. Glass fiber-reinforced and carbon fiber-reinforced grades provide a wide range of performance options.
KetaSpire Product Line
Solvays KetaSpire PEEK product line includes:
Neat grades (lubricated and non-lubricated)
Glass fiber and carbon fiber reinforced grades (low and high melt flow)
Wear resistant SL grades (lubricated and non-lubricated)
Natural-colored powders (coarse, fine, super-fine and ultra-fine)
Solvay KetaSpire KT-820 NT Natural pellets
Solvay KetaSpire KT-820 NL Natural pellets
Solvay KetaSpire KT-820 BK95 Black pellets
Packing:25kg/carton
Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI).
The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization.
Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions.
Key Features
High HDT of 207C (405F)
Superior toughness and impact strength
Exceptional long-term hydrolytic stability
Better chemical resistance than PSU and PEI
Withstands over 1,000 cycles of steam sterilization without any significant loss of properties
Inherently flame retardant
Transparent
Colorable
Typical Applications
Sterilization cases and trays
Dental and surgical instruments
Medical devices
Aircraft interiors
Airline catering trolleys
Hot water fittings
Plumbing manifolds
Food service trays
SOLVAY Veradel PES/PESU Series:
Veradel PESU was formerly marketed as Gafone PESU Veradel 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity. PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance. Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives.
PES/PESU SOLVAY Veradel 3000P
PES/PESU SOLVAY Veradel 3100P
PES/PESU SOLVAY Veradel 3200P
PES/PESU SOLVAY Veradel 3400P
PES/PESU SOLVAY Veradel 3600P
VeradelPESU (polyethersulfone) combines good chemical resistance with a high heat deflection temperature, making it a good fit for baby bottles and other food service applications. This resin is also inherently flame retardant for use in electronic components and testing devices
AvaSpire PAEK (polyaryletherketone) is a family of high-performance polyketones tailored to fill cost and performance gaps between PEEK and other high-performance polymers. For example, ductility and toughness can be significantly improved versus comparable grades of PEEK, delivering 20% higher tensile elongation at yield and doubled tensile elongation at break values.
Depending on the grade, AvaSpire PAEK outperforms comparable grades of PEEK.
Higher stiffness from 150 �°C to 190 �°C (302 �°F to 374 �°F)
Improved ductility and toughness
Equal or better chemical resistance
UL-94 V0 rating at 0.8 mm
Comparable strength and stiffness at up to 30% lower cost
Excellent aesthetics and colorability
AvaSpire PAEK is available in
KetaSpire PEEK
KetaSpire PEEK (polyetheretherketone) offers the best combination of fatigue resistance and chemical resistance, which is similar to PPS (polyphenylene sulfide). However, PEEK can operate at higher temperatures and retains its excellent mechanical properties at continuous-use temperatures up to 240 C (464 F), allowing it to replace metal in severe end-use environments. Glass
fiber-reinforced and carbon fiber-reinforced grades provide a wide range of performance options.
KetaSpire Product Line
Solvays KetaSpire PEEK product line includes:
Neat grades (lubricated and non-lubricated)
Glass fiber and carbon fiber reinforced grades (low and high melt flow)
Wear resistant SL grades (lubricated and non-lubricated)
Natural-colored powders (coarse, fine, super-fine and ultra-fine)
Packing spec: 25kgs per bag.
Please share us the material model number if you have and color/ order quantity so that we can quote you exactly the material meet your demands.
1133 Plastic Products Suppliers
Short on time? Let Plastic Products sellers contact you.
