7x1 pump combiner, 3x1 pump combiner, multimode pump combiner, power combiner, high power pump combiner
RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.
Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers.
High power Optical Fiber Components:
-Optical Fiber Isolator, up 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
Can Use for 5 Gallon(20kg) Barrel packaging Iron and plastic barrels
Suitable for 10,000-1,000,000cps high viscosity liquid
Equipped with high pressure special valve to realize high viscosity liquid precision dispensing and
greatly improve production and glue quality
Use the liquid within one month after the packing is opened
Motor power:400W
Rotor diplacement: 1.5/3/6cc Maximum delivery pressure: 80 kg
Repeated precision: +- 2% Maximum glue dispensing volume: 5ml/sec
Rated voltage: AC 220V Minimum glue dispensing amount: 0.005ml/sec
Rated frequency: 50HZ
Rated power: 500W
Rated pressure:0.6MPA
PMP-20 screw pumps are suitable for low, medium high viscosity or abrasive liquids such as silica gel, epoxy, grease, heat conducting gel, UV, etc.
The 5 gallon / 20L barrel is used, and the pressure plate sealing method is adopted to facilitate the use and replacement of glue. The stator and rotor are driven by the servo motor to ensure the realization of precision measurement, and solve the problems of glue breaking, unstable glue amount and uneven lines caused by the unstable pulse and air pressure of the traditional pneumatic piston pump.
The servo screw mode can be used in all dispensing processes such as bonding, fixing, potting, bottom filling, plane sealing or double liquid dispensing
Solve the problems of unstable pressure in pneumatic glue supply and transportation mode and unstable pressure caused by the change of rubber barrel affected by resistance, which affects the repeated accuracy of dispensing
Solve the pulse instability caused by pneumatic or cylinder and piston rubber supply and transportation
The equipment is equipped with a special servo drive controller with its own touch screen. Adjust the glue amount through the working speed function item. The larger the value is, the larger the glue amount is (the minimum is 0.005ml, the maximum is 5ml / sec, and the size can be customized)
Y&D800 peristaltic dispensing machine is suitable for quantitatively spitting out various low viscosity materials (such as instant adhesive, anaerobic sealing agent, electrolyte, ink, etc.); The rotating part uses rolling contact to reduce the friction resistance, so it improves the quantification and prolongs the service life of the hose.
Performance Parameters:
Size(mm) 184L*190W*94H
Weight 3.5kg
Rolling/Back Rolling 1-999�°
Voltage 110/220VAC, 50/60HZ
Speed 0-160RPM
Time/gelatinize 1-999
Min Dot 0.0001cc(0.2x¸0.7 operation)
Liquid density Under 10000cps
Standard CE Approved Yes
Features and Advantages:
1. Application for dispensing the liquid in lowness density(such as: instant adhesive, Electolyte, printing ink ect.
2. Turn on power and for usage without the air - pressure
3. Using the function on Rolling - contact for circumvolve to reduce the resistance, and progress the timer and prolong the usage of dispensing barrel.
4.1year function warranty
Application:
It is suitable for the precise dispensing process requirements of products with small amount of glue, and is controlled by manual switch. It can be equipped with Yiren three-axis dispensing machine. Liquid with viscosity below 10000 CPS is used for bonding, fixing, dot coating, linear coating, etc.
Common glue packaging: small bottle, small can, etc.
Place of Origin:CN;GUA
Type:variable vane pump
Brand Name:JUN TAI
pressure range:50--70 bar (kgf/cm2)
displacement:20 L/min
shaft key:parallel key or spline shaft
shaft diameter:12.70 mm or 15.875mm
flange size::82.55 mm
parallel key spec.:25mm length, 3.18mm width
sauction port diameter:1/2 "
delivery port diameter:3/8"
drain port diameter:1/4"
weight:5 kg
Type: hydraulic vane pump
Model Number: VP-SF-15-D (VP-15-FA3)
Brand Name: JUN LING
Place of Origin: Guangdong, China (Mainland)
pressure range: 50--70 bar (kgf/cm2)
displacement: 15 L/min
shaft key: parallel key or spline shaft
shaft diameter: 12.70 mm or 15.875mm
flange size:: 82.55 mm
parallel key spec.: 25mm length, 3.18mm
width sauction port diameter: 1/2 "
delivery port diameter: 3/8"
drain port diameter: 1/4"
weight: 5 kg
Type: hydraulic vane pump
Model Number: VP-SF-15-D (VP-15-FA3)
Brand Name: JUN LING
Place of Origin: Guangdong, China (Mainland)
pressure range: 50--70 bar (kgf/cm2)
displacement: 15 L/min
shaft key: parallel key or spline shaft
shaft diameter: 12.70 mm or 15.875mm
flange size:: 82.55 mm
parallel key spec.: 25mm length, 3.18mm
width sauction port diameter: 1/2 "
delivery port diameter: 3/8"
drain port diameter: 1/4"
weight: 5 kg
DLS Series Hydro Pressure Test Pump
Suncenter has rich experience in the hose / tube / pipe / valve / sensor / cylinder / guage Hydraulic Hose Testing Pump, we can provide reliable performance hydraulic pressure test equipment, leakage test equipment, burst test equipment and impulse test equipment
Hydraulic Hose Testing Pump
Suncenter has rich experience in the hose / tube / pipe / valve / sensor / cylinder / guage pressure test field, we can provide reliable performance Hydraulic Hose Testing Pump, leakage test equipment, burst test equipment and impulse test equipment, according to the standard of (GB/T5568, GB7939, ISO6802, ISO6803, ISO8032, GB/T12722, gb16897, GB/T5563, GB/T10544 etc.) do the test to the hydraulic hose and hydraulic hose assembly, automobile brake pipe, power train pipes and other pressure parts for pressure performance test.
DGGD Series Pneumatic Hydraulic Pump
Pneumatic hydraulic pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.
Pneumatic Hydraulic Pump
Pneumatic hydraulic pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios. Suncenter model numbers reflect the pumps nominal pressure ratiosï¼? while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.
SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.
SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator.
The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Donâ??t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.
Hydro Test Pump
Hydro Test Pump is a diagnostic technique used to perform hydrotesting of hydrostatic pipes, hydrostatic line testing, hose hydrotesting, cylinder hydrotesting, pressure vessel and boiler hydrotesting, cross-country hydrotesting of piping, valves, castings, components, etc. to find leaks or defects. Hydrotest pumping equipment is used to check that the component to be tested is filled with an incompressible fluid, usually water or oil. With the aid of a positive displacement reciprocating piston pump fitted with appropriate safety release and control devices, the pressure in the test assembly is slowly increased to a predetermined set point and maintained for a predetermined period of time.
Application
Boiler hydraulic test
Casting hydrostatic test
Cylinder hydrotest
Cross-country pipeline hydrotest
Hydraulic fittings hydrotest
Jacket hydrotesting
Mandrel extraction from hoses and cables
Pre-charging and hydrotesting of rubber hoses
Pipe hydrotesting and burst testing
Pipe hydrotesting
Valve hydraulic test
Hydrostatic testing of various industrial equipment
Vessel hydraulic test
Weld hydrotest
High Pressure Gas Pump
High pressure gas hydraulic pumps are designed for high efficiency with higher bypass pressures for increased productivity. The pneumatic pump range extends from small portable and high performance moveable configurations to high capacity power units.
Our personnel are generally within the spirit of "continuous improvement and excellence", and using the excellent top quality goods, favorable rate and superior after-sales expert services, we try to win every customer's believe in for Compressed Air Pressure Booster,We have been wanting forwards to creating long-term company interactions with around the world shoppers.The product will supply to all over the world, such as France ,Cuba ,Isle of Man ,Mauritania ,Micronesia .High output volume, top quality, timely delivery and your satisfaction are guaranteed.Welcome to join us to promote green light, together we will make a better Future!.We hope to cooperate with more customers for mutual development and benefits.We strive for excellence, constant improvement and innovation, is committed to make us the "customer trust" and the "first choice of engineering machinery accessories brand" suppliers.With the first-class solutions, excellent service, fast delivery and the best price, we've won highly praise foreign customers'.Working with us will save you money and time.
Hydro Test Pump
Hydro Test Pump is a diagnostic technique used to perform hydrotesting of hydrostatic pipes, hydrostatic line testing, hose hydrotesting, cylinder hydrotesting, pressure vessel and boiler hydrotesting, cross-country hydrotesting of piping, valves, castings, components, etc. to find leaks or defects. Hydrotest pumping equipment is used to check that the component to be tested is filled with an incompressible fluid, usually water or oil. With the aid of a positive displacement reciprocating piston pump fitted with appropriate safety release and control devices, the pressure in the test assembly is slowly increased to a predetermined set point and maintained for a predetermined period of time.
Application
Boiler hydraulic test
Casting hydrostatic test
Cylinder hydrotest
Cross-country pipeline hydrotest
Hydraulic fittings hydrotest
Jacket hydrotesting
Mandrel extraction from hoses and cables
Pre-charging and hydrotesting of rubber hoses
Pipe hydrotesting and burst testing
Pipe hydrotesting
Valve hydraulic test
Hydrostatic testing of various industrial equipment
Vessel hydraulic test
Weld hydrotest
Liquid Gas Pumps
Liquid Gas Pumps are typically centrifugal pumps used to pump liquefied hydrocarbons such as propane, butane, propylene and ethylene. These liquefied hydrocarbons are pumped at -104�°C, and liquefied natural gas (LNG) (usually methane) is pumped at -161�°C, where they remain liquid because above this temperature the gas begins to boil and evaporate.
SUNCENTER Liquid Gas Pumps are air driven at a drive air pressure of 2 to 10bar (29 to145 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.
Air Driven Liquid Pump
The air driven liquid pump is pneumatically driven reciprocating piston pumps. These air driven liquid pumps are proportional devices that utilize low pressure compressed air to drive a larger diameter piston (area x pressure) that is linearly connected to a smaller hydraulic piston/plunger. Utilizing this ratio principle, higher hydraulic pressure can be generated. Materials of construction include standard all stainless steel wetted ends and polyurethane pressure seals. Specialized materials of construction and special seals are also available upon request. Compact and lightweight, this air driven liquid pump requires no air lubrication and is suitable for water, oil and most chemical applications.
Air Driven Liquid Pump
The air driven liquid pump is pneumatically driven reciprocating piston pumps. These pumps are proportional devices that utilize low pressure compressed air to drive a larger diameter piston (area x pressure) that is linearly connected to a smaller hydraulic piston/plunger. Utilizing this ratio principle, higher hydraulic pressure can be generated. Materials of construction include standard all stainless steel wetted ends and polyurethane pressure seals. Specialized materials of construction and special seals are also available upon request. Compact and lightweight, this liquid pump requires no air lubrication and is suitable for water, oil and most chemical applications.
Applications
High pressure pneumatic liquid pumps are available in a variety of sizes for use in many industries including oil and gas, mining, construction, aviation, aerospace, automotive, biomedical, vegetable oil extraction, alternative energy, chemical, defense, food processing, hydraulic fracturing, and more.
DGG Series Air Hydraulic Pump
Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.
Air Hydraulic Pump
An air hydraulic pump is a device that utilizes compressed air to generate hydraulic pressure, which is then used to power various hydraulic machinery and tools. This type of pump combines the principles of both pneumatic (air) and hydraulic systems to create a versatile and efficient power source.
Features of an Air Hydraulic Pump
Compressed Air Source: An air hydraulic pump requires a supply of compressed air, typically from an air compressor. This air is used to pressurize hydraulic fluid, usually oil, within the pump's reservoir.
Hydraulic Pressure Generation: The compressed air drives a piston or diaphragm inside the pump, which in turn pressurizes the hydraulic fluid. This pressurized fluid is then directed to hydraulic actuators, cylinders, or tools to perform work.
Adjustable Pressure: Air hydraulic pumps often feature pressure adjustment mechanisms that allow users to control the output pressure. This adjustability is crucial for different applications that require varying levels of force.
Multiple Fluid Compatibility: These pumps are designed to work with various types of hydraulic fluids, including mineral oil-based fluids and synthetic hydraulic fluids, making them versatile for different industries.
43 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
