Ethylenediaminetetraacetic Acid (EDTA) is mainly used as a chelating agent and in the paper industry, home industrial and institutional care industry and agriculture industry .
Specifications
Appearance: White Crystalline Powder
Assay (as C10H16N2O8) %: 99.00
Chlorides %: 0.05
Sulfate (as SO4 2-) %: 0.02
Heavy Metal(as Pb) ppm: 10
Ferrum ppm: 10
PH Value (50g/L:2C): 2.8-3.0
Chelation Value mg (CaCO3)/g: 339
Loss on Drying %: 0.20
Packing
55.12lb paper bag, 40 bags per pallet
2204.6 LB Supersacks
Acetic acid, or ethanoic acid, is a clear, colorless liquid with a pungent vinegar-like odor. It has a molecular formula CHCOOH and a molecular weight of 60.05 g/mol. With a boiling point of 118.1, C and a melting point of 16.6C, acetic acids are highly soluble in water and miscible with most organic solvents. These physical properties make it a versatile compound for various industrial applications.
We can supply Acetic Acid Industrial Grade and Food Grade.
Commodity:Acetic acid.
Other name: Glacial acetic acid
Molecular formula CH3COOH
CAS:64-19-7
EC No.200-580-7
Introduction:
Annual capacity of our glacial acetic acid is 350,000.the raw material is methanol.we use a new technical process to produce: Methanol decomposition.
the most important characteristic of this way are as following:
mild oder; high quality--can reach 99.99%min; low cost--30% lower than oil decomposition and ethanol decomposition way.
Specifications:
Apha color:<10
Freezing point: 16
Specific gravity:1.04
Acetid acid: 99.8%
Acetaldehyde: 0.004%
Formic acid: 0.06%
Iron: 0.00004%
Non-Volatile Matter: 0.003%
The heavy metal(As Pb counts): 0.00002%
HPAA is chemically stable, hard to be hydrolyzed, hard to be destroyed by acid or alkali, safety in use, no toxicity, no pollution. HPAA can improve zinc solubility. Its corrosion inhibition ability is 5-8 times better than that of HEDP and EDTMP. When built with low molecular polymers, its corrosion inhibition effect is even better.
HPAA is mainly used as cathode corrosion inhibitor in oilfield refill water system in fields such as steel & iron, petrochemcal, power plant and medical industries. When built with zinc salt, the effect is even better.
Linear Alkybenzene Sulfonic Acid (sometimes referred to as Dodecylbenzene Sulfonic Acid or DDBSA) is a light yellow to dark brown colored liquid. LABSA is widely used in household products like detergents, shampoos, and hair conditioners, as well as in numerous industrial applications like as a catalyst for the esterification of fatty acids to produce biodiesel, and also for the synthesis of quinoxaline derivatives. LABSA is also used as a dopant for conducting polymers, a wetting agent, a dispersant, a foamer, a paraffin inhibitor, acidizing agent and an emulsion breaker.
Linear Alkylbenzene Sulfonic Acid (LABSA)
WC Code: 04-073-003
Sales Specification
Appearance: Viscous Amber Liquid
Active Matter (Mws: 322): 96.0 % MIN
Unsulfated Organic matter: 2.0 %MAX
Free Sulfuric Acid: 1.50 % MAX
Color, Klett (5% AM soln): 40 MAX
Acide Value: 182.0 to 188.0
Packing
Propionic acid is an important chemical raw material. Propionic acid and its derivatives are widely used in the synthesis of tree esters, grain preservation, food and feed additives, spices.
The earliest propionic acid was prepared by condensation and separation from the gas produced by charcoal manufacturing and coal coking. In the 1950s, foreign countries developed the process of producing acetic acid by oxidation of light hydrocarbons. The product contains about 10% (propionic acid), which is obtained after separation and purification. In addition to the hydrocarbon oxidation method, the United States also has the method of carbonylation of ethylene, CO and H2 to synthesize propionaldehyde and further oxidation to propionic acid. Due to the development of low-pressure carbonylation process with rhodium phosphine complex as catalyst, propionaldehyde oxidation method has developed rapidly in recent years. This method is superior to the traditional high-pressure method with carbonyl cobalt as catalyst.
Propionic acid, also known as primary oleic acid, is a short chain saturated fatty acid with the chemical formula ch3ch2cooh. Propionic acid is a colorless, corrosive liquid with pungent smell.
2-Hydroxyethyl Acrylate is an organic compound. It is an ester of acrylic acid. It is a very useful chemical compound that is industrially produced by liquid phase esterification of acrylic acid with ethylene oxide. It is also produced by the reaction of acrylic acid with ethylene glycol. Its chemical formula is C5H8O3.
Adipic acid is an important organic dibasic acid with the structural formula HOOC(CH2)4COOH. It can undergo salt-forming reaction,esterification reaction, amidation reaction, etc., and can be polycondensed with diamine or diol to form high molecular polymer.Adipic acid is an industrially important dicarboxylic acid. It plays an important role in chemical production, organic synthesis industry, medicine, and lubricant manufacturing. Its output ranks second among all dicarboxylic acids.
Polysorbate 80 USP/NF is a hydrophilic nonionic surfactant used as an emulsifier or surfactant in foods, medicines, skincare products, vaccines etc. It also acts as a surfactant in soaps and cosmetics.USP NF is a combination of two compendia, the United States Pharmacopeia (USP) and the National Formulary (NF).
Sales Specifications
Appearance: Oily, colorless or brownish yellow, clear or slightly opalescent liquid
Solubility: Dispersible in water, in anhydrous ethanol, in ethyl acetate and in methanol, practically insoluble in fatty oils and in liquid paraffin
Relative Density (g/ml): About 1.10
Viscosity @ 25oC: ~ 400
Identification
A) By infrared absorption: The absorption maxima in the spectrum obtained with the sample shall correspond to the reference spectrum of polysorbate 80/reference standard
B) Test for hydroxyl value: Should comply with the test for hydroxyl value
C) Test for saponification value: Should comply with the test for saponification value
D) Test for composition of fatty acids: Should comply with the test for composition of fatty acids
E) Chemical test: The solution should become blue
Acid Value (mgKOH/g):2.0 Max
Hydroxyl Value (mgKOH/g):Between 65 and 80
Peroxide Value:10 Max
Saponification Value (mgKOH/g):Between 45 and 55
Composition of fatty acids by GC
a) Myristic Acid:5.00 % Max
b) Palmitic Acid:16.00 % Max
c) Palmitoleic Acid:8.00 % Max
d) Stearic Acid:6.00 % Max
e) Oleic Acid:Not less than 58.00 %
f) Linoleic Acid:18.00 % Max
g) Linolenic Acid:4.00 % Max
Ethylene Oxide & Dioxane
a) Ethylene Oxide:1 ppm Max
b) Dioxane: 10 ppm Max
Water: 3.00 % Max
Total ash: Not more than 0.25 %
Packing
Polysorbate 20 USP/NF is a polysorbate-type nonionic surfactant used in many commercial and household products. It is composed of 20 repeated units of polyethylene glycol via ethoxylation. Polysorbate 20 USP/NF is a wetting agent, as well as washing agent, stabilizer and solubilizer in food products, laboratory assays and industrial applications. It is also an excipient that stabilizes emulsions and suspensions and lubricant in ophthalmic solutions. Polysorbate 20 USP/NF is used by philatelists to remove stamps from envelopes and to remove residues from stamps, without harming the stamp itself. Polysorbate 20 USP/NF is also used as wetting agent in rubber balers in the elastomer industry. Polysorbate 20 has been used as a shape directing agent to synthesize spheroidal magnetite nanoassemblies.
USPâ??NF is a combination of two compendia, the United States Pharmacopeia (USP) and the National Formulary (NF).
Specifications
Appearance: Oily, yellow to brownish-yellow, clear or slightly opalescent liquid
Solubility: Soluble in water, in ethanol, in ethyl acetate & in methanol; practically insoluble in fatty oils and in liquid paraffin
Relative Density: About 1.10
Viscosity @ 25oC: ~ 400
Identification:
A) By IR: Should comply with the test for IR
B) Test for hydroxyl value: Should comply with the test for hydroxyl value
C) Test for saponification value: Should comply with the test for saponification value
D) Test for composition of fatty acids: Should comply with the test for composition of fatty acids
E) Chemical test: The solution should become blue
Acid Value (mgKOH/g): 2.0 Max
Hydroxyl Value (mgKOH/g): Between 96 and 108
Peroxide Value (meq/kg): 10 Max
Saponification Value (mgKOH/g): Between 40 and 50
Composition of fatty acid (fraction of the substance)
a) Caproic Acid: 1.00 % Max
b) Caprylic Acid: 10.00 % Max
c) Capric Acid: 10.00 % Max
d) Lauric Acid: Between 40.00 % and 60.00 %
e) Myristic Acid: Between 14.00 % and 25.00 %
f) Palmitic Acid: Between 7.00 % and 15.00 %
g) Stearic Acid: 7.00 % Max
h) Oleic Acid: 11.00 % Max
i) Linoleic Acid: 3.00 % Max
Ethylene Oxide & Dioxane
a) Ethylene Oxide: 1 ppm Max
b) Dioxane: 10 ppm Max
Water: Between 0 and 3.00 %
Total ash: Not more than 0.25 %
Packing
1. Used as coating solvent: Sec-butyl acetate is similar to n-butyl acetate and isobutyl acetate in solubility, and can be used as a substitute for n-butyl acetate and isobutyl acetate in coating formulations.
2. Sec-butyl acetate is widely used as a solvent for nitro paint, acrylic paint, polyurethane paint, polyester paint, amino paint, epoxy paint and other paints.
3. Used as a solvent in the manufacturing process of synthetic resins
4. Used as a solvent in the hardener manufacturing process
5. As an ink solvent, it can completely replace n-butyl acetate as a volatile solvent in printing ink
6. Used as a solvent in the adhesive manufacturing process
7. Used as diluent: Sec-butyl acetate is an ideal component with low cost and low toxicity in diluents such as tenna water and banana water.
8. Used as cleaning agent: sec-butyl acetate can be used to configure washing net water, washing mold water, washing plate
9. Used in pharmaceutical industry: sec-butyl acetate can be used as an extraction agent in the production process of antibiotics, hormones and vitamins; Due to its moderate volatilization rate, it has good skin permeability, and can also be used as a drug absorption promoting component
10. Used as fine chemical: sec-butyl acetate can be used as fine chemical extraction agent, such as extraction separation of ethanol-propanol, acrylic acid and other substances; It can also be used as azeotrope in acetic acid recovery and other processes. 11. Used in the cosmetic industry, such as in the manufacture of nail polish.
12. Used in fragrance industry: sec-butyl acetate has a special fruit smell, can be used as a fragrance
13. Sec-butyl acetate can also be used in the manufacturing process of rubber, safety glass, coated paper, solar lamp tube and other products.
1.Methyl acetate is a fast drying solvent of nitrocellulose and cellulose acetate, which is used in paints and coatings.
2. It is also used in the manufacture of artificial leather and spices and as an extractant of oil.
3.It is also a raw material for making dyes .
4. In the experimental study, it is used as standard material and solvent for chromatographic analysis, and also used for the separation of lithium chloride from alkali metal chloride and the synthesis of spices.
Methyl acetate is an important solvent and organic chemical raw material. It is used in Production of oil and diesel. High-purity methyl acetate is also widely used in the synthesis of acetic acid, acetic anhydride, methyl acrylate, vinyl acetate and acetamide. The carbonylation of methyl acetate to produce acetic anhydride is currently the most economical process for producing acetic anhydride, and its market application prospects are very broad. The market price of high-purity methyl acetate is 2~4 times higher than low-purity methyl acetate. Therefore, the production of high-purity methyl acetate has greater economic benefits.
Used
1.Methyl acetate is a fast drying solvent of nitrocellulose and cellulose acetate, which is used in paints and coatings.
2. It is also used in the manufacture of artificial leather and spices and as an extractant of oil. .It is also a raw material for making dyes.
3. In the experimental study, it is used as standard material and solvent for chromatographic analysis, and also used for the separation of lithium chloride from alkali metal chloride and the synthesis of spices.
CAS 108-05-4
HS code 2915320000
Packaging:
190kg*80drum, 15.2ton/FCL
190kg*132drum, 25.08ton/FCL
General description
Vinyl acetate is an important ester of vinyl alcohol, which can find applications in the production of homo and copolymer dispersions. The production of vinyl acetate involves the addition of acetic acid to acetylene in the gas phase in the presence of zinc acetate/charcoal as catalyst.
Application
Vinyl acetate may be used as an analytical reference standard for the quantification of the analyte in water samples using liquid chromatography technique.
Refer to the productâ?²s Certificate of Analysis for more information on a suitable instrument technique. Contact Technical Service for further support.
Vinyl acetate, also known as vinyl acetate, is an organic compound, chemical formula C4H6O2, is an important organic chemical raw material.
It is mainly used as a raw material for the manufacture of synthetic fiber Vinylon, and is also a component of a variety of copolymer resins such as EVA. Polyvinyl acetate derivatives and polyvinyl alcohol, the polymers of vinyl acetate, are widely used as bonding agents, architectural coatings, textile sizing and finishing agents, paper reinforcing agents, and in the manufacture of safety glass.
