Find Verified Wire Mesh Suppliers, Manufacturers and Wholesalers

Specification
Material : polyurethane coated wire rope
Aperture shape :square or rectangular
Aperture range : 2mm to big
Wire rope diameter range : 1.5mm to big

Description
Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens.

The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering.
This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required.
The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top,
running in a cross-flow orientation, or positioned underneath the rope with the wire.

Features
Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck.
Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths.
The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflexs cloth construction.
The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer
periods between changeover and less downtime during busy screening periods.

The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes,
similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide.
The construction varies with either fully or partially welded wires.Sheets of poly can also be welded on for impact protection or enhanced abrasion
protection along the hooks.

Stainless steel woven wire meshes are generally made of stainless steel Type 302,304,304L, 316,316L, 321 and 430 etc. Primarily stainless steel, woven wire mesh stocks are also held in a range of other materials including mild steel, brass, bronze, copper, monel, aluminum, nylon and fiberglass

TORTOISE SHELL MESH

Tortoise Shell Mesh, also known as hex steel, hex mesh, hex steel, or hex mesh, is a specialized honeycombed steel designed for excellent retention and reinforcement of thin wall refractories. It complements dense hydraulic and chemically bonded refractories, providing significant erosion resistance.


Characteristics and Material
Material Options:

Carbon steel 0Cr13, 1Cr13

Stainless steel 0Cr18Ni9, 1Cr18Ni9Ti, 304, 304L, 316, 316L, 310S


Specifications:
Hole Distance: 2 cm - 6 cm

Mesh Thickness: 1 cm - 2.5 cm

Panel Thickness: 1 mm - 3 mm

Mesh Sizes: 30 mm, 40 mm, 48 mm, 50 mm, 60 mm, 80 mm, 100 mm

Connection Type: Inner buckle lock riveting, outer buckle lock riveting


Features
High Wear Resistance: Capable of withstanding severe abrasion.

High Temperature Resistance: Suitable for use in environments up to 1300�°C.

Corrosion Resistance: Effective in harsh chemical environments.

Strong Thermal State Impact Ability: Maintains integrity under thermal stress.

Good Mechanical Processing Performance: Easily shaped and installed.

High Weldability: Simplifies the installation process.

Long Lifetime: Durable and reliable in demanding applications.

Perforated Decorative Sheet
For perforated decorative sheet, the most popular is aluminium materials, The aluminium materials is light weight so it is more easy for architectural cladding and decoration.

Perforated Metal Panels Decorative
Decorative Perforated Metal Offers Ideal Combination of Form and Function

While perforated metal can provide a variety of valuable functions, it can also be used for decorative purposes. By simply changing the shape of the mold used to punch holes in the metal, you can create hole shapes in a variety of decorative patterns with relative ease. This allows you to enhance the appearance of your finished product and make it more attractive to your customers.

Customized Decorative Perforated Metal Solutions
If we don't have a decorative pattern that fits your vision, we can custom perforate any pattern. Our customization capabilities include hole sizes for your decorative perforated metal screens or panels other than the round, square or slotted products we stock. If you are not satisfied with a standard straight or staggered hole pattern, we can create any hole configuration you desire. We can adjust the percentage of open area of the panel to accommodate a wide range of material types.

We will work closely with you to develop customized solutions that meet your unique manufacturing requirements.

Galvanized welded wire mesh system made of high quality iron wire, made by precision processing technology automated machinery, flat surface, solid structure, strong integrity, Even the cut or in part under pressure is not caused by slack phenomenon occurs, welded wire mesh forming platedzinc (hot dip), good corrosion resistance, general barbed wire does not have the advantage of.
Galvanized welded wire mesh can be used as a poultry cages, egg baskets, channel fences, gutters, porch fence, rodent control network, mechanical shield, animal and plant fences, gate frames, etc. It is also widely used in industry, agriculture, construction, transport, mining and other industries.

extensively used in animal fencing,building district fencing,confine livestock,slope landscaping,zoo,grass fencing

Materials:
Galvanized steel wire, PVC coated iron wire in blue, green, yellow and other colors.
Weaving characteristics:
traditional twist barbed wire and reverse twist barbed wire
General Use:
Barbed wire mainly serves in protecting of grass boundary, railway, highway, fence topping etc

Nickel mesh is a corrosion resistant material wire mesh. The pure nickel mesh can be 99.98% Ni. The material have Ni200 Ni201, N4, N6, N8 etc. Nickel wire mesh is widely used as filtration madia. The nickel metal mesh is used for anode current collection

Porduct Name PTFE diamond shaped stretch mesh
Brand PTFE/PVDF
Mesh size 0.5-400 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm
Wire diameter | thickness 5.0mm-0.05mm
Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole
Density 2.2g/cm3
Melting point -200+250
Characteristic
(1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it.
(2) Thermal stability: The cracking temperature is above 400 . Therefore, it can operate normally within the temperature range of -200 to 300 , and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields.
(3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber
(4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.  
Appliaction
High temperature resistance - operating temperature up to 250 .
Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 , it can maintain a 5% elongation rate.
Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents.
Climate resistance - has an aging life in plastics.
High lubrication - is the highest friction coefficient in solid materials.
Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance.
Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time.
The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh.
Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc.

Product Name Alloy20 Wire Mesh
Brand Carpenter20|Alloy20|NS143|UNSN08020|NiCr20CuMo
Mesh number | mesh size 0.5-400Mesh
Wire diameter | thickness 5.0mm-0.05mm
Weaving method Plain weave Twill weave Mat weave
Density 8.08g/cm3
Melting point 1370-1420
characteristic
Carpenter20 Carpenter chromium-nickel-molybdenum-copper corrosion-resistant alloy filter screen is a chromium-nickel-molybdenum-copper corrosion-resistant alloy.
It has good corrosion resistance in sulfuric acid, nitric acid and their mixed acid medium. (Especially in dilute sulfuric acid (concentration below 30%) environment)
It has excellent hot working, cold working and welding performance, and is also easy to cast. It is mainly used in chemical, petrochemical, metallurgical and rare metal refining industries
Application
Pulp and paper industry classifiers, separators, screening equipment, bleaching equipment, storage and processing systems, oil and gas pipelines, heat exchanger pipes, sewage treatment systems, high-pressure storage tanks, high-pressure pipelines, heat exchangers (chemical processing industry), filtering and screening vessels under high-intensity explosive environments, chemical industry, petroleum equipment, metallurgy, and rare metal refining industries.

Product Name NO8020 Wire Mesh
Brand Carpenter20|Alloy20|NS143|UNSN08020|NiCr20CuMo
Mesh number | mesh size 0.5-400Mesh
Wire diameter | thickness 5.0mm-0.05mm
Weaving method Plain weave Twill weave Mat weave
Density 8.08g/cm3
Melting point 1370-1420â??
characteristic
Carpenter20 Carpenter chromium-nickel-molybdenum-copper corrosion-resistant alloy filter screen is a chromium-nickel-molybdenum-copper corrosion-resistant alloy.
It has good corrosion resistance in sulfuric acid, nitric acid and their mixed acid medium. (Especially in dilute sulfuric acid (concentration below 30%) environment)
It has excellent hot working, cold working and welding performance, and is also easy to cast. It is mainly used in chemical, petrochemical, metallurgical and rare metal refining industries
Application
Pulp and paper industry classifiers, separators, screening equipment, bleaching equipment, storage and processing systems, oil and gas pipelines, heat exchanger pipes, sewage treatment systems, high-pressure storage tanks, high-pressure pipelines, heat exchangers (chemical processing industry), filtering and screening vessels under high-intensity explosive environments, chemical industry, petroleum equipment, metallurgy, and rare metal refining industries.

Product Name Carpenter20 Wire Mesh
Brand Carpenter20|Alloy20|NS143|UNSN08020|NiCr20CuMo
Mesh number | mesh size 0.5-400Mesh
Wire diameter | thickness 5.0mm-0.05mm
Weaving method Plain weave Twill weave Mat weave
Density 8.08g/cm3
Melting point 1370-1420
characteristic
Carpenter20 Carpenter chromium-nickel-molybdenum-copper corrosion-resistant alloy filter screen is a chromium-nickel-molybdenum-copper corrosion-resistant alloy.
It has good corrosion resistance in sulfuric acid, nitric acid and their mixed acid medium. (Especially in dilute sulfuric acid (concentration below 30%) environment)
It has excellent hot working, cold working and welding performance, and is also easy to cast. It is mainly used in chemical, petrochemical, metallurgical and rare metal refining industries
Application
Pulp and paper industry classifiers, separators, screening equipment, bleaching equipment, storage and processing systems, oil and gas pipelines, heat exchanger pipes, sewage treatment systems, high-pressure storage tanks, high-pressure pipelines, heat exchangers (chemical processing industry), filtering and screening vessels under high-intensity explosive environments, chemical industry, petroleum equipment, metallurgy, and rare metal refining industries.

Product Name N10276 Wire Mesh Alloy Perforated Metal Stretch Metal Laser Perforated Metal
Brand HastelloyC-276| N10276|NS334|W.Nr.2.4819
Mesh number | mesh size 0.5-300 Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm
Wire diameter | thickness 5.0mm-0.05mm
Weaving method Plain weave Twill weave Mat weave Diamond hole Round hole Square hole Oblong hole, hexagonal hole
Density 8.9g/cm3
Melting Point 1325-1370â??
Characteristic
Hastelloy C-276 Hastelloy alloy woven wire mesh is a tungsten-containing nickel-chromium-molybdenum alloy with extremely low silicon-carbon content. It is considered to be the best corrosion-resistant alloy. It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride salt solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance in low-temperature and medium-temperature hydrochloric acid. Therefore, in the past thirty years, it has been widely used in harsh corrosive environments such as chemical, petrochemical, flue gas desulfurization, pulp and paper, environmental protection and other industrial fields.
Application
â?  In both oxidizing and reducing atmospheres, it has excellent corrosion resistance to most corrosive media.
â?¡ It has excellent resistance to pitting, crevice corrosion and stress corrosion. The higher Mo and Cr content makes the alloy resistant to chloride ion corrosion, and the W element further improves the corrosion resistance. At the same time, Hastelloy C-276 Hastelloy alloy woven wire mesh is one of the only materials resistant to corrosion by moist chlorine, hypochlorite and chlorine dioxide solutions, and has excellent corrosion resistance to high-concentration chloride solutions such as ferric chloride and cupric chloride. It is suitable for sulfuric acid solutions of various concentrations and is one of the few materials that can be used in hot concentrated sulfuric acid solutions.
Hastelloy C276 is suitable for: petrochemical equipment, heat exchangers, flue gas desulfurization equipment, fluid chemical pumps, fluorine chemicals, etc.
Contact Infomation
Whatsapp:+86-13315865785
Email:estrellayue@ofolan.com
M.P:+86-13315865785