Global tech gt-pcm-c series pcm multiplexer chassis can take 64k bps timeslot as granularity, construct n* 64k bit nd approximate 50w maximum power consumption.
* varied service types and port quantities are configurable flexibly in chassis.
*
¡ö rx range: ¡ü 27db
¡ö transmission distance
Multi mode fiber: 5km
Single mode fiber: 20/60/120km
¡ö jitter feature: comply with g.742 and g.832
¡ñ ethernet interface
¡ö 10m/ 100m auto negotiation
¡ö full/ half auto negotiation
¡ö related standard: iee802.3, iee802.1q (vlan)
¡ö connector: rj45
¡ö mdi/ mdix auto negotiation
¡ö mac address table: up to 4096
¡ñ e1 interface
¡ö bit rate: 2.048m bps ¡à50ppm
¡ö coding: hdb3
¡ö timeslot control: pcm30£¬pcm31
¡ö impedance: 120¦¸ (balanced), 75¦¸(unbalance)
¡ö port feature: comply with g.703
¡ö connector: rj45 (120¦¸), bnc (75¦¸)
¡ö jitter feature: comply with g.745 and g.832
¡ñ fxo/s interface
¡ö sampling frequency: 8k hz ¡à50ppm
¡ö encoding law: a-law
¡ö impedance: 600¦¸
¡ö overload point: +3.14dbm
¡ö related standard: comply with itu-t g.712¡¢g.713
Features
PAL (625/50) and NTSC (525/60) standard auto-recognition
The technical specifications are better than broadcast quality
Video 10 bits A/D conversion, audio 20 bits A/D conversion
Video AGC(auto gain control)functionality, poor video signal input tolerance
Audio output balance/unbalance can be transformed automatically, ESD (Electric Static Discharge) functionality, more safer , more stable
Transmission distance up to 120 km without relay
All components, including connectors, are ordered from public-known manufacturers in the world, high stability and reliability ensurance
Enclosure box material is made of aluminum, elegant appearance, light weight
PCB boards made with environment friendly Pb-free and RoHS Compliant
Convenient instructions of LED status Indicator, video/audio activity, optical link, power supply etc
Applications
TV programme signal transmission
Video conference system
Remote multimedia studio
Distance learning system
Brief Introduction
XOV X101 is high performance digital optic fiber transmission system. Input 1-channel composite analog video, 2 -channel analog audio. Output 1-channel composite analog video,2 or 4 or 6-channel analog audio.
The quality of video, audio non-compressed transmission with digital designs is much superior to the analog transmission based on amplitude frequency modulation designs.
Due to the advanced digital fiber optic transmission technology, almost you need not make any adjustments, simple to set up, easy to operate.
SFP Fiber-optic Transceiver with Up to 155M/1.25Gbps Data Rate
1470/1490/1510/1530/1550/1570/1590/1610nm Wavelength(DFB laser)
Reach to 40km/80km.
(Digital Diagnostic Monitor compatible)
C-Light transceivers family includes SFP SFP+ XFP X2 CWDM. All products are compatible with MSA. They are suitable for Fast Ethernet, Gigabit Ethernet, SDH/STM and Fiber Channel network system. Data rate ranges from 155M to 10G. Distance reach from 80m to 80km in MMF and SMF. These products can be compatibly used in brands devices of 3COM, Alcatel, Cisco, Extreme, Foundry, HP and Juniper.
X2 Fiber-optic Transceiver with Up to 10GB Data Rate
850nm/1310nm Wavelength(DFB laser)
Reach to 85m/10km.
(Digital Diagnostic Monitor compatible)
C-Light transceivers family includes SFP SFP+ XFP X2 CWDM. All products are compatible with MSA. They are suitable for Fast Ethernet, Gigabit Ethernet, SDH/STM and Fiber Channel network system. Data rate ranges from 155M to 10G. Distance reach from 80m to 80km in MMF and SMF. These products can be compatibly used in brands devices of 3COM, Alcatel, Cisco, Extreme, Foundry, HP and Juniper.
Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC addresses table: 1K
Data buffer: Built-in 128Kbyte RAM .
Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: ST/SC/FC, 100Mbps
Cable:
UTP: Cat. 5 (the max distance up to 100m)
Fiber ( Multimode): 50/125, 62.5/125m, the max distance up to 2km or 5km
Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125m, the max distance up to 20 -120km
Flow Control
Full Duplex: Supporting standard IEEE802.3x
Half Duplex: back pressure
LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power Requirement: AC 170 ¡« 240V, DC 5V.
Ambient Temperature: 0 ¡« 70
Humidity: 5 ¡« 90%
Dimensions: Internal power: 30, 110, 140mm
External power: 26, 70, 93mm.
Technical Specifications
Operating standards: IEEE802.3z/AB, 10/100/1000Base-T and 1000Base-SX/LX/HX
MAC address table: 4K
Data Buffer: 256K
Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: LC,1000Mbps
Cable :
UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)
Fiber : multimode : 50/125, 62.5/125¦Ìm (the max distance up to 550/224m)
singlemode : 8.3/125, 8.7/125, 9/125¦Ìm (the max distance up to 100km)
Flow control
Full Duplex: IEEE802.3x
Half Duplex: back pressure.
Power: AC 220V(170-260V) 50Hz; DC 5V£¬1A
Ambient temperature: 0 ¡« +50
Storage temperature: -20 ¡« +70
Humidity: 5% ¡« 90%
Dimensions:
Internal Power: 40 (high) x 110 (width) x 140 (length) mm
External Power: 26 (high) x 70 (width) x 93 (length) mm.
Technical Specifications
Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX
MAC address table: 4K
Data Buffer: 256K
Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: SC,1000Mbps
Cable :
UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)
Fiber : multimode : 50/125, 62.5/125¦Ìm (the max distance up to 550/224m)
singlemode : 8.3/125, 8.7/125, 9/125¦Ìm (the max distance up to 100km)
Flow control
Full Duplex: IEEE802.3x
Half Duplex: back pressure.
Power: AC 220V(170-260V) 50Hz; DC 5V2A
Ambient temperature: 0 ¡« +50
Storage temperature: -20 ¡« +70
Humidity: 5% ¡« 90%
Dimensions: 40 (high) x 110 (width) x 140 (length) mm .
OFS Gigabit Single Fiber Converter can convert Optical£Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 90km through single optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabyte IC from USA and Taiwan. It must be used in couples because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and diagnose the failure of converters.
Main features
The transmission of a channel signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber.
Auto negotiation function allows UTP port to auto select 10/100/1000M and Full Duplex or Half Duplex
The UTP port supports MDI / MDI-X auto crossover.
Supporting the max 1536 bytes packets
Adopting internal power supply to insure equipment at long-hours work stably.
Technical Specifications
Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX
MAC address table: 4K
Data Buffer: 256K
Connector: UTP: RJ-45,10/100/1000Mbps Fiber: SC,1000Mbps.
Cable :
UTP: Cat.5e or Cat.6 (the max distance up to 100m)
Fiber (singlemode): 8.3/125, 8.7/125, 9/125, 10/125µm (the max distance up to 90km)
Flow control:
Full Duplex: IEEE802.3x
Half Duplex: back pressure
Power: AC. 220V(170-260V) 50Hz; DC. 5V 2A
Ambient temperature:0 ¡« +50
Storage temperature:-20 ¡« +70
Humidity:5% ¡« 90%
Dimensions:40 (high) x 110(width) x 140 (length) mm.
14 Slots Media Converters Rack
It is acceptable for the most 14 sets of 10M, 10/100M 10/1001000MMedia Converters within a rack-mountable chassis which is supplied with unified power. Installing at the center of network, the Rack not only reduce the links, simplify the structure, but also ease for management and maintenance.
Main features:
The power of the Rack can be supplied by the type of single power or dual power. Adopting dual power supply, the load of each power can be reduced and the life of the power would extend. When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the RACK.
Supplying the Converters or Powers to be plugged and played.
It is possessed of stable performance, large capacity of power supply, and ease for management and maintenance
2U high: 19-inch standard design
Technical Specifications:
Capacity : 14 slots available
Power: Input: AC 100 ¡« 260V, 50¡«60HZ
Output: DC +5V 12A
Power protection: protection from over voltage, over current and short circuit
Working temperature: 0¡«50
Storage temperature: -20¡«70
Relative Humidity: 5%¡«95%
Dimensions: 485 (wide), 245 (length), 90 (high) mm.
FC, SC, ST, LC, MU, MTRJ, MTP/MPO, DIN, ESCON, D4, ESCON ,VF-45 etc. Low insertion loss. High return loss. G652,G655,G65/ fiber, LSZH, Plenum and Hytrel cables available. Simplex or duplex. Single mode or multimode.
Fiber optic patch cables are suited for equipment jumper cord, cross connects, and work area connections. All fiber optic patch cord cables are manufactured using riser grade cable and are factory tested to make sure performance to meet Telcordia standards. Patch cords are available in both multimode and singlemode, in duplex and simplex.
Global Tech economic multi-service SDH is fully compliant with ITU-T and China domestic SDH standard, and can benefit your network with compact design, flexible topology and intelligent architecture. GT-SDH-155B provides two STM-1 optical line interfaces, versatile E1, V.35 and FE multiplexing and transmission, ITU-T G.813 compliant NE timing, VC-12 level switching and path protection mechanism. GT-SDH-155B can operate as ADM or TM to construct point-to-point, chain and ring networks.
* Compact 1U design, 19¡± standards rack and less space consumption.
* Support Ring,Chain and P to P topology structure, Perfect NMS and CLI Management.
* 2 STM-1 optical interfaces, optional 1+1 protection operation.
* 2~ 8 GFP applied FE interfaces(or droping in 2 Gigabit Ethernet), optional 4~ 16 E1 interfaces, 1~ 2 V.35 interfaces.
* Configurable N* 64K V.35 interface, N=1~ 32.
* Remote Power Monitoring and Loopback Test.
* Remote management and centralized management. Support DCC over VC-12.
* Dual power supply: DC -48V, AC 220V.
Ethernet Interface
* 10M/ 100/1000M auto negotiation
* Full/half duplex auto negotiation
* MDI/ MDIX auto negotiation
* Connector: RJ45
* Related Standard: IEE802.3, IEE802.1Q(VLAN)
* MAC Address Table: Up to 4096
V.35 Interface
* Bit Rate: N* 64Kbps, N=1~ 32
* Electric Feature: ITU-T V.35
* Terminal Interface: ISO2593
Operation Environment
* Working Temperature: -50~ 50
* Storage Temperature: -40~ 85
* Related Humidity: 5%~ 95%, non-condensing
* No corrosive and solvent gas, no dust and heavy EMI
* Power Supply: AC 220V, DC -48V
* Power Consumption: ¡Ü 20W
* Physical Dimension: 483mm(W)* 45mm(H)* 154mm(D).
Global Tech GFP EoP, Ethernet over PDH, Interface Converter can transport GFP encapsulated Ethernet service over 1 up to 16 E1 channels. Fully comply with G.7041, G.7042, G.7043, and G.8040 recommendations, GFP Interface Converter can cooperate with the products from other manufactures adopted the same recommendations.
GFP Interface Converters can transform traffic between E1 interface and Ethernet interface, and utilize current adequate E1 resources to extend the Ethernet transmission distance and coverage range without any network reformation.
Feature
* GFP encapsulation based Ethernet interface can cooperate with other vendors GFP based Ethernet equipments.
* Up to 4 Ethernet interfaces.
* Switching Ethernet interfaces isolation is configured by E1 channel or 802.1Q through NMS, disabled by default.
* Automatically Fault Shifting function.
* Support Telnet/Web browser/SNMP NMS management. Strong NMS function to support client managing in complicate topology.
Technical Parameter
* E1 Interface
- Bit Rate: 1.984M bps
- Coding: HDB3
- Impedance: 75, Unbalanced/ 120, Balanced
- Port Feature: G.703 and G.704
- Connector: Q9 (75)/ RJ45 or RJ48-C (120)
* Ethernet Interface
- 10M/100M auto negotiation
- Full/half duplex auto negotiation
- Port Quantity: 1, up to 4 ports
- MDI/MDIX auto negotiation
- Related Standard: G.7041, G.7042, G.7043, G.8040
* Operation Environment
- Working Temperature: -10~ 55
- Storage Temperature: -40~ 70
- Relative Humidity: 5%~ 95%, non-condensing
- No corrosive and solvent gas, no dust and heavy EMI
- Power Supply:
AC 180~ 260V, Desktop,
DC -72~ -36V, Chassis
- Support 1+1 dual power supply in chassis configuration
Global Tech PMUX-E series manageable PDH has adopted the state-of-the-art technologies and advanced FPGA to provide 1E1/4E1/8E1/16E1 multiplexing and optical electrical regeneration. With plug and play modularized design, GP6 can support all kinds of customized service requirement. The equipment able to support more than 2FE with shared bandwidth 10/100/1000M.
* Provide max. 16 E1 channel transparent transmission with 4 wire speed 10M/100/1000M Ethernet channels. Fully comply with G.703 and IEEE802.3
* With optical line bit rate at 155.52Mbps, reach the max. 120KM transmission distance.
* 1+1 optical interfaces support forced switch and automatic protection switch.
* Support Automatic Laser Shutdown on all optical interfaces.
* E1 interface supports HDB3 E1 coding and comply with G.703, G.823 and G.742.
* 4 Ethernet interfaces support full/half duplex auto negotiation.
* Transparent transport IEEE802.1Q and flow control are provided at Ethernet Interfaces.
* Sophisticated alarm function. Monitor the remote end equipment status from local end.
* Support E1 loop back function on local and remote end, with convenience for equipment maintenance and management.
* Support Engineering Order Wire with standard phone set.
* Rack mounted chassis and standalone desktop configurations are available.
* Desktop configuration provides RS232 management port. Chassis configuration provides Ethernet and RS232 management port. Both configurations support E1 in-band management.
Ethernet Interface
* Work Mode: Full/half duplex, auto negotiation
* Bit Rate: Support max. 100/1000M wired line Ethernet
* Connector: RJ45
* Related Standard: IEEE802.3
* MDI/ MDIX auto negotiation.
E1 Interface
* Bit Rate: 2.048M bps
* Coding: HDB3
* Impedance: 75,120
* Related Standard: ITU-T G.703, G.821, G.82
Operation Environment
* Working Temperature: -10C~ 60C
* Storage Temperature: -40C~ 85C
* Relative Humidity: 0%~95%, non-condensing
* No corrosive and solvent gas, no dust and heavy EMI
* Power Supply: AC 220V, DC -48V.
Global Tech GT-SDH-155A 63E1 SDH is the compact STM-1 level Synchronous Digital Hierarchy (SDH) transmission system compatible with ITU-T standard. It is designed as a modular system with two 155.520Mb/s optical interfaces to provide an ultra-compact, cost-effective and high capacity platform. It provides fully cross-connect between all tributaries, and can be used as Terminal Multiplexer (TM) or an Add-Drop-Multiplexer (ADM) to build point-to-point, ring and chain transmission network.
Feature
# Achieve Multiplexing from 63 E1 to 2 STM-1 optical interfaces
# 1U height, 19 Inch width standard
# Service interface
* Two STM-1 optical interfaces, SFP optical module (LC connector)
* Maximum 63 E1 interfaces compliant with ITU-T G.703, optional unbalanced/ balanced interface
# Timing mode
* STM-1 line timing (T11,T12)
* Tributary timing from E1-1 to E1-63 (T2)
* External timing source input (T31/T32), 2048Kbit/s by default and 2048KHz selectable
* External timing output (T41/T42), 2048Kbit/s by default and 2048KHz selectable
* ITU-T G.813 internal oscillator
* The timing source can be auto-switched according to SSM or operator settings
# Supports 1+1 protection and Automatic Protect Switch (APS) with the switching time less than 50ms
# Supports Remote power Down Detection (RPD) and Auto Laser Shutdown (ALS)
# Supports embedded BERT and various loop back for troubleshooting
# Highly efficient management system
* Supports NE management based on CLI command via RS232 interface or TELNET
* Supports Network management based on PC via unified platform: GTVIEW
* Supports three network management types: Traditional DCC management, Inner DCN management (by some VC12 channel) and outer DCN management (by E1 cable via outer EXM interface).
# Power system
* Two backup power supply
* 220V AC or-48V DC single power
* -48V DC & 220V AC double power
* -48V DC & -48V DC double power
* 220V AC & 220V AC double power
* Power consumption less than 25W
Technical Parameter
System Fabric
* Cross Connect: 4* 4 VC-4
