Single Drum Vibratory Rollers
This product is middle type mechanical vibratory roller. It is mainly used for compacting various construction materials such as non-cohesive soil, sandy soil, graves, macadam aggregate mixtures. Especially suitable for compact community road, village highway, underground garage, playground and all kinds of groove earthwork backfill.
MAIN FEATURES
1. Hydraulic vibrating and steering, rear drive. Adopts 4 cylinder water-cooling diesel engine, excellent power output.
2. Adopts shaft transmission is more efficiently.
3. Adopts wheel-sided reducer rear axle, torque is very powerful. three times as durable as mechanical rear axle.
4. It has high speed mode, save time and tow truck to change work place. Adopts air pressure oil brake, more reliably and stably.
MAIN PERFORMANCE PARAMETRES
ã??MODEL KYL-Z1450C
ã??Operating Mass 6000kg
ã??Exciting Force 85kn
ã??Vibration Frequency 40Hz
ã??Drum Width/Diameter 1450/1110mm
ã??Static Linear Load(Front) 210N/cm
ã??Travel Speed 2/5/8/11km/h
ã??Gradeability 30%
ã??Minimum turning radius 5500 mm
ã??Wheelbase 2350mm
ã??Min. ground clearance 280 mm
ã??Battery Voltage 12V
ã??Diesel/ Hydraulic tank capacity 85/85L
ã??Diesel Model ZN490B
ã??Diesel Power 34/36.8kw
ã??Dimension(LÃ?WÃ?H) 4350x1650x2700mm
Single Drum Vibratory Rollers
This product is clamp-type hydraulic vibratory roller, it has narrow size in equal series. It is mainly used for compacting various construction materials such as non-cohesive soil, sandy soil, graves, macadam aggregate mixtures. Especially suitable for compact community road, village highway, underground garage, playground and all kinds of groove earthwork backfill.
MAIN FEATURES
1. Hydraulic vibrating and steering, rear drive. Adopts Changchai 4 cylinder water-cooling diesel engine, excellent power output.
2. clamp-type front frame can work to edge and corner, suitable for narrow groove.
3. Adopts shaft transmission is more efficiently. It has high speed mode, save time and tow truck to change work place.
4.Adopts fiberglass water tank, convenient for humidification. Change smooth tread tire can work to asphalt road surface
MAIN PERFORMANCE PARAMETRES
ã??MODEL KYL-Z1300C
ã??Operating Mass 4000kg
ã??Exciting Force 68 kn
ã??Vibration Frequency 45Hz
ã??Drum Width/Diameter 1300/1000mm
ã??Static Linear Load(Front) 110N/cm
ã??Travel Speed 2/5/8/11 km/h
ã??Gradeability 30%
ã??Minimum turning radius 4700 mm
ã??Wheelbase 2110mm
ã??Min. ground clearance 220mm
ã??Battery Voltage 12V
ã??Diesel/ Hydraulic tank capacity 74/74L
ã??Diesel Model ZN490
ã??Diesel Power 34/36kw
ã??Dimension(LÃ?WÃ?H) 4000x1420x2520mm
Single Drum Vibratory Rollers
This product is clamp-type hydraulic vibratory roller, it has narrow size in equal series. It is mainly used for compacting various construction materials such as non-cohesive soil, sandy soil, graves, macadam aggregate mixtures. Especially suitable for compact community road, village highway, underground garage, playground and all kinds of groove earthwork backfill.
MAIN FEATURES
1. Hydraulic vibrating and steering, rear drive. Adopts Changchai 4 cylinder water-cooling diesel engine, excellent power output.
2. clamp-type front frame can work to edge and corner, suitable for narrow groove.
3. Adopts shaft transmission is more efficiently. It has high speed mode, save time and tow truck to change work place.
4.Adopts fiberglass water tank, convenient for humidification. Change smooth tread tire can work to asphalt road surface
MAIN PERFORMANCE PARAMETRES
ã??MODEL KYL-Z1300C
ã??Operating Mass 4000kg
ã??Exciting Force 68 kn
ã??Vibration Frequency 45Hz
ã??Drum Width/Diameter 1300/1000mm
ã??Static Linear Load(Front) 110N/cm
ã??Travel Speed 2/5/8/11 km/h
ã??Gradeability 30%
ã??Minimum turning radius 4700 mm
ã??Wheelbase 2110mm
ã??Min. ground clearance 220mm
ã??Battery Voltage 12V
ã??Diesel/ Hydraulic tank capacity 74/74L
ã??Diesel Model ZN490
ã??Diesel Power 34/36kw
ã??Dimension(LÃ?WÃ?H) 4000x1420x2520mm
Single Drum Vibratory Rollers
This product is clamp-type hydraulic vibratory roller, it has narrow size in equal series. It is mainly used for compacting various construction materials such as non-cohesive soil, sandy soil, graves, macadam aggregate mixtures. Especially suitable for compact community road, village highway, underground garage, playground and all kinds of groove earthwork backfill.
MAIN FEATURES
1. Hydraulic vibrating and steering, rear drive. Adopts Changchai 4 cylinder water-cooling diesel engine, excellent power output.
2. clamp-type front frame can work to edge and corner, suitable for narrow groove.
3. Adopts shaft transmission is more efficiently. It has high speed mode, save time and tow truck to change work place.
4.Adopts fiberglass water tank, convenient for humidification. Change smooth tread tire can work to asphalt road surface
MAIN PERFORMANCE PARAMETRES
ã??MODEL KYL-Z1300C
ã??Operating Mass 4000kg
ã??Exciting Force 68 kn
ã??Vibration Frequency 45Hz
ã??Drum Width/Diameter 1300/1000mm
ã??Static Linear Load(Front) 110N/cm
ã??Travel Speed 2/5/8/11 km/h
ã??Gradeability 30%
ã??Minimum turning radius 4700 mm
ã??Wheelbase 2110mm
ã??Min. ground clearance 220mm
ã??Battery Voltage 12V
ã??Diesel/ Hydraulic tank capacity 74/74L
ã??Diesel Model ZN490
ã??Diesel Power 34/36kw
ã??Dimension(LÃ?WÃ?H) 4000x1420x2520mm
This product is small type double drum hydraulic vibratory roller. Applied to mending maintaining various roads, expressway shoulder, side work, parking area, playground and garden lawn. Especially suitable for compact wayside, pipeline channel and drainage trench and all kinds of grooves backfill.
FEATURES
1. Hydraulic vibrating and steering, Back drive. Adopts Changchai 3 cylinder water-cooling diesel engine, excellent power output.
2. Adopts side gear transmission, less power loss and more efficient.
3. Clamp-type frame is better for fit edge, fit edge height is more than 60cm, higher than road shoulders.
4. Upgrade to oil brake and use new gearbox is more efficient and faster speed.
MAIN PERFORMANCE PARAMETRES
ã??MODEL KYL-Z1090C
ã??Operating Mass 3000kg
ã??Exciting Force 35kn
ã??Vibration Frequency 45 Hz
ã??Drum Width/Diameter 1090/780mm
ã??Static Linear Load 120/153N/cm
ã??Travel Speed 2.4/10km/h
ã??Gradeability 20%
ã??Minimum turning radius 3500 mm
ã??Wheelbase 2150mm
ã??Min. ground clearance 170mm
Diesel/ Hydraulic tank capacity 60/60L
ã??Diesel Model ZN385
CF3B35G/ZN390B
ã??Diesel Power 21ï¼?25.8/26.5ï¼?kw
ã??Dimension(LÃ?WÃ?H) 3000x1300x2400mm
This product is small type double drum hydraulic vibratory roller. Applied to mending maintaining various roads, expressway shoulder, side work, parking area, playground and garden lawn. Especially suitable for compact wayside, pipeline channel and drainage trench and all kinds of grooves backfill.
FEATURES
1. Hydraulic vibrating and steering, Back drive. Adopts Changchai 3 cylinder water-cooling diesel engine, excellent power output.
2. Adopts side gear transmission, less power loss and more efficient.
3. Clamp-type frame is better for fit edge, fit edge height is more than 60cm, higher than road shoulders.
4. Upgrade to oil brake and use new gearbox is more efficient and faster speed.
MAIN PERFORMANCE PARAMETRES
ã??MODEL KYL-Z1090C
ã??Operating Mass 3000kg
ã??Exciting Force 35kn
ã??Vibration Frequency 45 Hz
ã??Drum Width/Diameter 1090/780mm
ã??Static Linear Load 120/153N/cm
ã??Travel Speed 2.4/10km/h
ã??Gradeability 20%
ã??Minimum turning radius 3500 mm
ã??Wheelbase 2150mm
ã??Min. ground clearance 170mm
Diesel/ Hydraulic tank capacity 60/60L
ã??Diesel Model ZN385
CF3B35G/ZN390B
ã??Diesel Power 21ï¼?25.8/26.5ï¼?kw
ã??Dimension(LÃ?WÃ?H) 3000x1300x2400mm
This product is small type double drum hydraulic vibratory roller. Applied to mending maintaining various roads, expressway shoulder, side work, parking area, playground and garden lawn. Especially suitable for compact wayside, pipeline channel and drainage trench and all kinds of grooves backfill.
FEATURES
1. Hydraulic vibrating and steering, Back drive. Adopts Changchai 3 cylinder water-cooling diesel engine, excellent power output.
2. Adopts side gear transmission, less power loss and more efficient.
3. Clamp-type frame is better for fit edge, fit edge height is more than 60cm, higher than road shoulders.
4. Upgrade to oil brake and use new gearbox is more efficient and faster speed.
MAIN PERFORMANCE PARAMETRES
ã??MODEL KYL-Z1090C
ã??Operating Mass 3000kg
ã??Exciting Force 35kn
ã??Vibration Frequency 45 Hz
ã??Drum Width/Diameter 1090/780mm
ã??Static Linear Load 120/153N/cm
ã??Travel Speed 2.4/10km/h
ã??Gradeability 20%
ã??Minimum turning radius 3500 mm
ã??Wheelbase 2150mm
ã??Min. ground clearance 170mm
Diesel/ Hydraulic tank capacity 60/60L
ã??Diesel Model ZN385
CF3B35G/ZN390B
ã??Diesel Power 21ï¼?25.8/26.5ï¼?kw
ã??Dimension(LÃ?WÃ?H) 3000x1300x2400mm
Product Application
KYL-Z900Q is 1 ton roller has compact appearance, can used for narrow area. Mainly used for soil, asphalt, and sand compaction. New construction and repair work for road construction projects, such as school, playground, and highway repair.
Features:
1Adopts imported variable piston pump drives the roller stepless speed walking, infinitely variable speed;
2Double drums hydraulic driving and steering, hydraulic vibration is driven by imported motor;
3 Engine optional: air cooled diesel engine, Honda gasoline engine;
4 Operate radius small, can work in small area, suitable for groove backfill;
5International NSK bearing, MITSUBOSHI triangle belt, Eaton steering gear;
6Surface spray, beautiful appearance, rust resistant.
Technical Parameter
Model KYL-Z900Q
Walk Speed 0-8.0km/h Water Tank 100L
Gradeability 30% Hydraulic Oil Tank 60L
Drive Type Hydraulic Double Drive Engine Model CF192F
Vibration Type Hydraulic Vibration Power 10.0HP
Static Linear Control 56N/cm Steel Wheel Size Φ560mm* 900mm*2
Nominal Amplitude 0.6mm Package Size 2300*1250*1700mm
Vibration Frequency 70Hz Net Weight 1500kg
Exciting Force 30KN Starting Mode Electric
KYL-450 is 200kg hand push single drum vibratory road roller, mainly used for narrow place compaction, soil and asphalt pavement; road maintenance and construction.
Such as highway construction of culvert, channel into the edge, corner of the compaction of asphalt concrete, bridge abutment backfill structures, large roller compaction cannot work area.
Main Features
1).Operating radius is small, can work in a small area; hand push road roller
2).HONDA gasoline, quality assurance, superior performance, easy to start;
3).Surface spray, beautiful appearance, rust resistant, reversing conveniently, long lifetime.
Model KYL-450
Walk Speed 0-3km/h Water Tank 20L
Gradeability 30% Hydraulic Oil Tank 0L
Drive Type Hand push type Engine Model Honda GX160
Vibration Control Automatic Clutch Power 5.5HP
Static Linear Load 40N/cm Steel Wheel Size 425*450mm
Nominal Amplitude 0.6mm Package Size 750*750*900mm
Vibration Frequency 70Hz Working Weight 200kg
Exciting Force 15KN Starting Mode Recoil
Road Roller KYL-600C is one kind of small-size Road Roller, adopts famous Air cooled engine , the engine is optional, the power is 5.5HP, it adopts hydraulic station,ensure the compaction performance of the whole machine and gradeability, our Vibratory Roller has hand and electric start, small operating radius, can work in a small area, the mini road roller is mainly used for compact asphalt, broken stone, backfill and concrete etc. The packaging of the Roller is wooden case or according to customers' requirements.
Main Features
1.Operating radius is small, can work in a small area.
2.Domestic famous water-cooled diesel engine, quality assurance, superior performance, easy to start.
3. The use of famous brand hydraulic drive unit, convenient to reverse, long lifetime, reversing convenient.
4. Handrails using plane gear adjusting mechanism, flexible, can adapt to different height workers to operate.
5. Adopt international famous NSK bearing MITSUBOSHI v-belt, to ensure the work performance of the machine.
6. Diesel power which electric startup, light and flexible.
7. Beautiful appearance, rust resistant.
Technical Parameter
Model KYL-600C
Walk Speed 0-3.0km/h Water Tank 17L
Gradeability 30% Hydraulic Oil Tank 19L
Drive Type Hydraulic Station Engine Model CF170F
Vibration Type Automatic Clutch Power 5.50HP
Static Linear Control 40N/cm Steel Wheel Size Φ425mm* 600mm 轮宽
Nominal Amplitude 0.6mm Package Size 1100*1000*1200mm
Vibration Frequency 70Hz Net Weight 320kg
Exciting Force 15KN Starting Mode Hand or Electric
Road Roller KYL-S600C is one kind of small-size Road Roller, adopts famous Air cooled engine , the engine is optional, the power is 7HP, it adopts hydraulic station, double drum driving and vibration, ensure the compaction performance of the whole machine and gradeability, our Vibratory Roller has hand and electric start, small operating radius, can work in a small area, the mini road roller is mainly used for compact asphalt, broken stone, backfill and concrete etc. The packaging of the Roller is wooden case or according to customers' requirements.
Main Features
1.Operating radius is small, can work in a small area.
2.Domestic famous water-cooled diesel engine, quality assurance, superior performance, easy to start.
3. The use of famous brand hydraulic drive unit, convenient to reverse, long lifetime, reversing convenient.
4. Handrails using plane gear adjusting mechanism, flexible, can adapt to different height workers to operate.
5. Adopt international famous NSK bearing MITSUBOSHI v-belt, to ensure the work performance of the machine.
6. Diesel power which electric startup, light and flexible.
7. Beautiful appearance, rust resistant.
Technical Parameter
Model KYL-S600C
Walk Speed 0-4.0km/h Water Tank 20L
Gradeability 30% Hydraulic Oil Tank 21L
Drive Type Hydraulic Station Engine Model CF178F
Vibration Type Automatic Clutch Power 7.0HP
Static Linear Control 53N/cm Steel Wheel Size Φ425mm* 600mm*2
Nominal Amplitude 0.5mm Package Size 1450*1100*1200mm
Vibration Frequency 70Hz Net Weight 550kg
Exciting Force 20KN Starting Mode Hand or Electric
Heavy load for the rocky condition; the working device and front and rear frame feature thick board of high strength,reasonable distribution and strong carrying capacity.
The large rock bucket with capacity of 3.0m³ is improved in terms of the work efficiency and adaptation. The bucket teeth adopt the structure of toothholder and sleeve. The cutting blade and bucket edge are equipped with protection device, featuring excellent abrasion resistance and shock resistance.
LW300KN is the most popular model of China 3t wheel loader,updated from the old model zl30g, now LW300KN is upgrading to new model LW300KV equipped with EURO III engine with electric injector, new model will have high performance.
The SD16 is equipped with a hydraulic drive system with hydraulic control technology and has an advanced structure, providing reliable performance and convenient and flexible operation, making the SD16 an ideal construction machine.
Famous Engine
Optimized low speed torque capability and machine productivity
Strong torque delivery leads to higher breakout force
Best-in-class fuel efficiency
Efficient Hydraulic System
Twin pump flow merging hydraulic system increasesmachine efficiency
The optimized hydraulic system paired with the drive
train reduces machine cycle time and increasesproductivity
Joystick hydraulic control for easy and preciseoperation
Operator Station
Premium operator station withbig space and superior visibility
Patented MAC mount providesless noise and increased comfort
Adjustable suspension seat
Sliding side window and AC withfresh air circulation provideoperator comfort
Single lever shifting is flexible andconvenient
Adjustable air flow outlet deliversbetter defrost performance
Reliable Drivetrain
Countershaft transmission with upgraded core componentsprovides high reliability
Large rim-pull in 1st gear and higher speed in 2nd gear provide high efficiency for load and carry applications
Clutch cutoff selection switch ensures stable and safe operation
Torque convertor structure is simple and efficiency is high
The SEM designed and built axle provides best in class performance in heavy duty applications
Advanced Cooling System
The standard cooling package provides high reliability in 50 ambient conditions.
Shock pad mounts ensure reliability under severe applications
Solid Structure
Structures undergo Finite Element Analysis (FEA) and On Machine Stress Analysis (OMSA) to ensure durability
Performance Series (PS) buckets improve loading capability
Serviceability
System pressure test ports are standard
Big angle engine hood side open door provides easy service access
Torque convertor is isolated from transmission making it easy to service
Safety
Safety design complies with all regulatory requirements
Production System (CPS) leveraged in manufacturing process
3-point touching design provides convenient operator entering to cabin
Backup alarm ensures machine safety
Environmentally friendly painting process
Machine Applications
The sturdy design of the 655D makes it the perfect machine for large volume earthmoving applications
In Hopper feeding and Coal loading applications the 655D can load more, move faster and burn less fuel
Multiple work tools are available for increased versatility
