silicone rubber heater is a kind of thin film which heats upon electrified, in a standard thickness of 1.5mm, Adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high-temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers.
Specification
This product mainly consists of alloy electric heating wires and silicone rubber high temperature insulating cloth,it generates heat rapidly with even temperature,high heat efficiency &good toughness,it conforms to American UL94-V0 grade flammability standard, it is easy to use,safe and water-proof,the aging life can be as long as 5 years.
Technical Parameters
1) The maximum temperature resistance of the insulating material:250C
2) Highest service temperature:250 C-300C
3) Insulating resistance:5M
4) Compressive strength:1500v/5s
5) Power deviation rate:±8%
6) High voltage resistance:>5KV
7)Maximum 1000mm 8000mm minimum 20mm, 20mm thickness1.5mm (thinness 0.8mm,thickness 4mm)lead wire length: Standard 200mm, in case
that the above dimensions are exceeded, please contact with our company.
Features
1) Designed according to actual shape and dimensions, including three-dimensional
geometry to meet the requirement of your equipment
2) Moisture-proof and non-slip silicone rubber material offers longer working life of heaters
3) Simply sticking to your components through sulfuration, adhesive or fixer
Heaters have a full function electronic thermostat New thermostat replaces the standard mechanical thermostat found on other brands. Provide sensitive control of room temperatures to around 1 degree.
Feature
Heaters will not reduce humidity or oxygen.
Heats up to 1000 Square Feet.
Uses 1.26 kilowatts hour when it's running full time.
Washable pre-filter.
BTU 5600.
Use Accurate Digital Thermostatic Controls Display.
Temperature setting Thermostat range 37-86
Quartz Infrared Emitters Stainless deflection coils.
Safety cutoff, Simple operation.
Pre-setting on off.
Efficient heating.
Energy saving function.
Fan Noise Level 42 dB much quieter and softer.
Full function remote control with delay start feature.
Plastic Cabinet with Caster Wheels.
Model WW 15064P
Material Plastics Veneer
Consumption 1500 watt Max
Current 12.5A Max
Dimensions L 46.04 W 33.02 H 31.75 cm
Weight 9.8 Kg
AC Cord 6 feet
Silicone Carbide heaters (SiC) is a non metal electric heating element made from SiC and its main raw materials. It has some specific properties such as low expansion coefficient, little deformation, stable chemical property, long service life and is very easy to install. SiC elements are used in applications ranging from below 600�°C up to 1600�°C in both air and controlled atmospheres and are commonly used in furnaces.
Since there are no standard furnaces, SiC heaters come in a variety of shapes and sizes and can be both used vertically or horizontally.
The surface load of SiC heaters is in direct relation with the life of SiC heaters and therefore it is necessary to control the surface load within the range when heating.
Our company can provide "m" type, "u" type, "h" and straight-type silicon carbide rod type, you can buy various types of furnaces according to the actual situation, different specifications of silicon carbide, if there are special needs, It can be resolved through consultation.research, etc.
Silicon-carbon rods have the characteristics of high temperature resistance, oxidation resistance, corrosion resistance, fast heating, long service life, small high temperature deformation, convenient installation and maintenance, and good chemical stability.
Matched with the automatic electric control system, the accurate constant temperature can be obtained, and the temperature can be adjusted automatically according to the curve according to the needs of the production process.
Heating with silicon-carbon rods is not only convenient, but also safe and reliable.
It has been widely used in high temperature fields such as electronics, magnetic materials, powder metallurgy, ceramics, glass, semiconductors, analytical testing, scientific research and so on. it has become the electric heating element of tunnel kiln, roller kiln, glass furnace, vacuum furnace, muffle furnace, smelting furnace and all kinds of heating equipment.
Sheath/Casing materials:SUS304/ SUS321/ SUS316/ SUS316L/ SUS310S/ Incoloy800/ Incoloy840/ Copper/ Titanium
Lead Options:Flexible Leads(Internally)/ Externally Connected Leads/ Straight Leads with Clip Support/ 90° Leads/ 90° Leads with Clip
Material of Lead Wire/Cable:Silicone cable /Silicone fiberglass cable/Pure Nickel Cable/Teflon cable/PVC cable and Special Cable
Lead Protection:Straight Strain Relief Spring/ Stainless Steel Braid/ Stainless Steel Armor/ Right Angle Elbow/
End cap:Ceramic end (standard)/ Cement/ Epoxy/ R
These ceramic heating elements can be used as spare parts for industrial heating gun, Hot air gun ,Plastic Welding Gun,and Hot wind machine.
No matter Where you come from and No matter What type of heating elements you need, Hope we can help you save cost, increase efficiency and enlarge marketing.
Product Name: Air heater
Item No: W-serie
Rated Voltage: 12V/24V
Rated Power: 5500W/4000W
Type of Moter: Brushless
Life Time of Motor: 20000h
Weight:Â 5.75Â KGS
Dimension: 425*148*162(200)mm
Product Name: Air heater
Item No: E-serie
Rated Voltage: 12V/24V
Rated Power: 4500W/4000W/3000W/2000W
Type of Moter: Brushed
Life Time of Motor: 2000h
Weight:Â 5.75Â KGS
Dimension: 372*141*150(175)mm
We are one of the prominent Flanged Immersion Heater Manufacturers, Exporters and Suppliers from India. The Flanged Immersion Heaters we offer are made from the best quality material abnd are high on demand in the market. Flanged Immersion Heaters are ideal for generating steam and heating gases and liquids in pressure vessel or tanks.
Attributes
Easy to install
Ease of maintenance
Perfect for higher K.W output applications
Safe designing
Fast-acting
Ideal for low-wattage applications
Applications
Chemical industry
Textile industry
Nuclear industry
Oil & Gas industry
Bright Nickel industry
Dull Nickel
Zinc/Copper industry
To enquire about the desired product(s), just check the box and then click â??Enquiry Nowâ?� button which is provided below.
We are widely known as a reliable High Density Cartridge Heaters Manufacturer, Exporter and Supplier in the worldwide market. The Cartridge Heating Element we offer is designed for use in the applications where limited heat is required. The High Density Cartridge Heaterss are manufactured using pure Magnesium Oxide insulation ensuring high and efficient heating.
Attributes
High watt density
Fast heat transfer efficiency
High dielectric strength
Swaging increases the high thermal conductivity
Uniform heating
Shock and vibration resistant
Built in thermocouple J or K
Advantages
Maximize Heat Transfer
Maximum operating temperature 750oC
Reduce Maintenance Costs
Leak proof welded end cap prevents heater contamination due to the entry of any foreign materials
Our heaters are cylindrically ground to have better surface contact and minimum hole tolerance
Product Details
Wattage tolerance : +5%-+10%
Diameter In MM :
5
6
8
9.5
10
12
12.5
14
16
20
25
Used In
Dies
Hotplates
Platens
Injection molds
Packaging machinery Heaters
Avail from us the best quality Ceramic Band Heaters at the most affordable prices. The Ceramic Band Heaters we provide are made for proper contact heating on cylindrical surfaces. The Ceramic Band Heaters can also be used for air cooled applications. We provide Ceramic Band Heaters with insulated jacket cover to save energy.
Salient Features
Excellent dielectric strength
High thermal conductivity
Fast heating up and cooling down
Economic
Durable
Low maintenance cost
Raw Materials Used
M.S.
Brass
S.S. sheathing
Applications
Injection Molding
Blow Molding
Drum Heating
Extruders
Dies Ceramic Band Heaters
We are counted amongst the most dependable Porcelain Heaters Manufacturers, Exporters and Suppliers in the global market. The Porcelain Heaters we manufacture are made with high temperature bearing insulators ensuring high and efficient heating. In Porcelain Heaters elements are exposed partially in air for better transmission of air. Porcelain Heaters are extensively used in applications where draining is not possible.
Attributes
High performance
Precise designing
Trouble free functioning
Maintenance free
Durable
We are electric blanket factory in Qingdao, China. We can provide CE/GS/CB/BSCI/UL Approved Machine Washable Electric throw/under Blanket :With auto timer; thermostat function; two helix heated wire; much more healthy, convenient,comfortable and energy-efficiency.
