This is a essential Sensor set on the wrists of cobot. It makes the robot enable tool collision, tool weight compensation, force control, direct teaching tool, and object weight measurement with checking any power on senor.
The 6-axis F/T Sensor KIT, featuring AIDIN ROBOTICS' advanced force-sensing technology, is now optimized for Rainbow Robotics & Neuromeka cobot series. It overcomes the limitations of capacitance measurement and offers functions like force control and collision detection. This kit improves manufacturing efficiency and ensures safe human-robot collaboration.
The 6-axis F/T Sensor KIT, featuring AIDIN ROBOTICS' advanced force-sensing technology, is now optimized for Rainbow Robotics & Neuromeka cobot series. It overcomes the limitations of capacitance measurement and offers functions like force control and collision detection. This kit improves manufacturing efficiency and ensures safe human-robot collaboration.
Ultra-thin Joint Torque Sensor accurately and sensitively measures torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.
This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialized situations where only torque needs to be extracted or in motors that generate torque.
Ultra-thin Joint Torque Sensor accurately and sensitively measures torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.
This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialized situations where only torque needs to be extracted or in motors that generate torque.
146246 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
Ultra-thin Joint Torque Sensor accurately and sensitively measures torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.
This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialized situations where only torque needs to be extracted or in motors that generate torque.
This is a essential Sensor set on the wrists of cobot. It makes the robot enable tool collision, tool weight compensation, force control, direct teaching tool, and object weight measurement with checking any power on senor.
The 6-axis F/T Sensor KIT, featuring AIDIN ROBOTICS' advanced force-sensing technology, is now optimized for Rainbow Robotics & Neuromeka cobot series. It overcomes the limitations of capacitance measurement and offers functions like force control and collision detection. This kit improves manufacturing efficiency and ensures safe human-robot collaboration.
Aluminum, copper wire, electronics devices and appliances, food and beverages, spices and condiments, agricultural products, used trucks, used trailers, used tankers, used rescue vehicles,.
SJ-OCC-SS-576-1 Stainless Steel Fiber Optical Cross Connect Cabinets OCC is designed for the connection between the Optical fiber cable and the main points, and it is a kind of port device. It has the function of direct or indirect connection, coiling, storage, and dispatching on the fiber cable.
Specification:
Model NO.: SJ-OFOC-04
Dimension (HWD) MM: 860X610X335
Material: Cold-rolled Steel or Stainless Steel.
Installation: Wall Mounted.
Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement.
1.We make the tooling by ourselves according to customer's drawing or sample
2.We send samples to customer to confirm first
3.Lifetime:forever,we maintain freely
Usage: Pole Brackets are used to support ADSS fittings of utility poles
DIN Rail Industrial Powerline Ethernet BridgeMaster
Brief introduction
DIN Rail Industrial PLC Ethernet Bridge Master is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. Can be used in one phase or 3 phases ,The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..
1.1 Highlight
1.1.1 Technical parameters
Support G.hn.
Industrial DIN rail style installation
Actual bandwidth up to 400Mbps
The maximum transfer distance up to 1000 meters
Self-adapt the rate
Compatible with all G.hn devices
One Domain Master can manage 15pcs End Point
There can be 16 groups(16 different Domain Master) of PLC telecommunication devices in the same power line circuit
1.1.2 Manageability
Support Remote Firmware update(TR069)
802.3D Ethernet Bridge
802.1Q VLAN
Quality of Service(QoS)
IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Support local web management
1.1.3Operating environment
Working temperature: -40-80
Operating humidity: 10%-85% no condense
Storage humidity:5%-90% no condense
1.1.4Design standards
ITU-T G.9960
IEC 60529
IEC 50022
IEC 60068-2-6
MIL-STD-810G
1.2 Features
Packet loss.1%?100M,load 70%
Support 7*24 hours all weather operation
hardware watch dog function
PING2MS
The quantity of the group 16pcs
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
Beijing dingdianbaiwei electronic technology co., ltd is an established professional reseller, repairer, and refurbisher of telecom equipment. As this is our only business, we strive to be the best.
Products from most major manufacturers such as alcatel-lucent, lucent are covered under repair program. Our repair department is highly knowledgeable and experienced, and you can always depend on a quick turnaround on your repair. All telecom parts are quality tested and carry our standard, one-year warranty.
Dingdian’s single-source solution includes repair of a wide range of equipment including but not limited to:
We are keep offering new and used nortel modules at a low price, including om3500/om5200/om4200/om6500/dx/7480/7440/6440/8k/5k and much more. Please email if you need.
Jingjingzheng@ding-dian.Com
Inline polarizer (ilp)
Ruik¡¡¥s(ruik-tech communication co., ltd, skype:ruiktech, yhl(at)ruik-tech.Com) inline polarizer (ilp) has always been along with very excellent features can be applicated in communication system, test instrumentations, fiber sensors, research.
Features: low insertion loss, high return loss, high extinction ratio, high reliably.
Category:
1310nm in line polarizer (ilp) (3port in panda fiber),
1550nm in line polarizer (ilp) (3port in panda fiber),
1064nm in line polarizer (ilp) (3port in panda fiber),
980nm in line polarizer (ilp) (3port in panda fiber),
850nm in line polarizer (ilp) (3port in panda fiber),
1310nm in line polarizer (ilp) (input-smf-28e/hi 1060 fiber),
1550nm in line polarizer (ilp) (input-smf-28e/hi 1060 fiber),
1064nm in line polarizer (ilp) (input-smf-28e/hi 1060 fiber),
980nm in line polarizer (ilp) (input-smf-28e/hi 1060 fiber),
850nm in line polarizer (ilp) (input-smf-28e/hi 1060 fiber),
1064nm in-line polarizer (ilp), 900um loose tube, 1m, fc/apc(senko brand)
Specifications:
Center wavelength(nm):1064
Opterating wavelength range(nm):+/-30
Typ. Insertion loss(db):0.40
Max, insertion loss(db):0.60
Min. Return loss(db):50
Typ. Extinction ratio(db):30
C)(3port all in panda fiber),
1550nm polarization beam splitter/combiner(pbs/c) (3port all in panda fiber),
1064nm polarization beam splitter/combiner(pbs/c) (3port all in panda fiber),
1310nm polarization beam splitter/combiner(pbs/c) (port3 in hi1060 fiber),
1550nm polarization beam splitter/combiner(pbs/c) (port3 in hi1060 fiber),
1064nm polarization beam splitter/combiner(pbs/c) (port3 in hi1060 fiber),
1310nm polarization beam splitter/combiner(pbs/c) (port3 in smf-28e fiber),
1550nm polarization beam splitter/combiner(pbs/c) (port3 in smf-28e fiber),
1064nm polarization beam splitter/combiner(pbs/c) (port3 in smf-28e fiber),
Package dimensions:
Packing info.:
6pieces per box for free,
Box size:22*22*10mm
1550nm 1x2 polarization beam splitter/combiner(pbs/c)
Specifications:
Center wavelength(nm):1550
Opterating wavelength range(nm):+/-40
Typ. Insertion loss(db):0.40
Max, insertion loss(db):0.60
Min. Return loss(db):50
Typ. Extinction ratio(db):35
Min. Extinction ratio(db):22
Max. Handing power(mw):500
Max, tensile load(n): 5
Fiber type: fujikura panda fiber1550
Operating temperature:-5~70
Storage temperature:-40~80
146246 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
