5052 aluminum coils is Aluminum-magnesium alloy aluminum coils.
Mg is the main alloying element in 5052 aluminum coils.
It is the most widely used rust-proof aluminum.
The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength.
It can not be heat-treated, the plasticity of it is good in semi-cold hardening.
Itâ??s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing.
The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc.
Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution.
In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%.
Surface Advantages of 5052 Aluminum coils:
1 - surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate.
2 - The surface is allowed to have peeling, air bubbles, surface roughness.
and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located.
But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%.
3 - Allow the supplier to illuminate the profile longitudinally to a smooth surface.
4 - Other requirements: There are demanders and suppliers to draw up their own.
Application of 5052 Aluminum coils:
5052 aluminum coils is mainly used for high plasticity with good weldability.
It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc.
It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material.
The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
8011 aluminum coil adds Fe-Si elements on the basis of 1 series pure aluminum. If the total alloy elements exceed 1%, its alloy properties will have higher advantages. It is commonly used to make aluminum foil below 0.2 and aluminum coils of 0.2-0.5. Its performance is better than that of pure aluminum foil, and it is widely used in aluminum foil and aluminum coil thin materials.
1050 pure aluminum coil has low density, good electrical and thermal conductivity, good corrosion resistance, and good plastic processing performance. It cannot be strengthened by heat treatment. The strength can be improved through cold deformation. The only form of heat treatment is annealing.
1060 aluminum coil is industrial pure aluminum with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity. It has good elongation and tensile strength, but its strength is low and heat treatment cannot enhance the machinability.
1100 aluminum coil belongs to the aluminum series, its strength is relatively low, and it has excellent ductility, formability, weldability and corrosion resistance; the corrosion resistance can be further improved after anodizing, but it cannot be strengthened by heat treatment.
3003 aluminum coil is a common aluminum alloy coil, mainly composed of aluminum and manganese, with good corrosion resistance, workability, and welding properties.
Its main uses include manufacturing various types of oil tanks, pipelines, pressure vessels, food and chemical processing equipment, etc.
The product characteristics and application scope of 3003 aluminum coil are as follows: Good corrosion resistance, suitable for equipment and structures working in harsh environments.
Good deep-drawing and welding properties, easy to process into various shapes and sizes of products.
Smooth surface, easy to perform surface treatment and painting.
Widely used, including manufacturing automobile parts, building materials, power equipment, electronic components, food packaging, etc.
Overall, 3003 aluminum coil is a high-quality aluminum alloy material with good physical and chemical properties, suitable for production and manufacturing in various industrial and civil fields.
3003 aluminum coil is an aluminum-manganese alloy coil, whose main components include: Aluminum (Al): accounting for about 98% of the aluminum coil, it is the main component, with lightweight, high strength, good conductivity, and thermal conductivity.
Manganese (Mn): accounting for about 1%~1.5% of the aluminum coil, it can increase the strength and hardness of the aluminum coil, improve its corrosion resistance and weldability.
Other elements: 3003 aluminum coil may also contain small amounts of copper (Cu), iron (Fe), silicon (Si), and other elements, as well as trace impurities.
The content and proportion of these components will have a certain impact on the performance of 3003 aluminum coil.
For example, the content of aluminum and manganese has an important influence on its hardness and strength, and the addition of copper, iron and other elements can improve the heat treatment and processing properties of aluminum coil.
Therefore, precise control of its chemical composition is needed during the production of 3003 aluminum coil to ensure its stable performance and excellent quality.
Product Description :
Aluminum is also theoretically 100% recyclable with no loss of its natural properties. It also takes 5% of the energy to recycle scrap aluminum then what is used to produce new aluminum.
The most common uses of aluminum include:
Aluminum is the third most abundant metal in the Earth’s crust, and the third most abundant element overall. No other metal can compare to Aluminum when it comes to its variety of uses. Some uses of aluminum may not be immediately obvious; for example, did you know aluminum is used in the manufacturing of glass?
Aluminum popular features: Lightweight · Strong · Resistant to corrosion ·
Durable · Ductile · Malleable · Conductive · Odorless
Price of product ( USD price or FOB price) :
Monthly quantity at least 3.000 MT.
Best price over 5.000 MT monthly.
Selling price LME Less 20% .
Product origin : Russia and Non Russia
Key Specifications/Special Features :
Aluminum A7/A8 GOST 11069-74
Quality Value demanded by norm GOST 11069-74
A7 A8
Al Min. 99,7% Min. 99,8%
Fe Max. 0,16% Max. 0,11%
Si Max. 0,15% Max. 0,08%
Cu Max. O,01% Max. 0,01%
Zn max. 0,05% Max. 0,05%
Ti max. 0,02% Max. 0,02%
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
Hot Selling Aluminium Ingot A7 99.7% & A8 99.8% best Price
Aluminium Ingot A7 99.7% And A8 99.8%. Once the aluminum scrap is collected and sorted, it is placed into a melting furnace and turned into molten aluminum at temperatures ranging from 1300 to 1400 degrees Fahrenheit. This molten aluminum cast into large slabs called ingots or billets. And since aluminum never loses its performance or strength during the recycling process, the same piece of aluminum can enter the secondary production process time and time again, multiplying the cost savings and environmental benefits. Not only does secondary aluminum production use less energy, it reduces landfill waste, contributes much lower greenhouse gas emissions and greatly reduces costly international transportation.
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Our advantage: 1. We offer the most competitive prices. 2. We provide relevant professional product consulting. 3. We are willing to help customers find any potential products and merchandise. 4. You can visit our factory by yourself. Our success is inseparable from your support and making friends from all over the world in good faith. 5. Our aim is: integrity first; reputation first, best reputation; once cooperation, friends for a lifetime.
For more information about our product, please feel free to contact us.
Applications:
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap
Aluminum block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted
auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc.
Aluminum scrap
Density: 2.702g/cm
Melting point: 660.37
Boiling point: 2467.0
Features: Free from Nuts, Steel plate, paint
Chemical Composition: AL
Appearance: Silvery White
We have Aluminum Tense Scrap in stock, we also have Aluminum Radiator scrap, Aluminum Wheel Scrap, Aluminum Extrusion and Aluminum Ingots Scrap. Contact us for more.
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products.
Product name: Pure Aluminum Extrusion Scrap 6063
Series: 6063
Al Content (%): 99.9%
Material: Alloy 6063
Color: Silver White
Tensile strength: 145MPa
Brand Name: OEM
Model Number: AB97
Grade: Other
Alloy Or Not: Is Alloy
Secondary Or Not: Is Secondary
Al (Min): 98.5
Product Name: Aluminum ingot
Weight:: 5-19 kg
Package Weight:: 500-600 kg
Package Dimension: 800x800x1000 mm
Standard:: GOST 295-98
Usage: Metallurgy Industry
2210 Aluminum Coils Suppliers
Short on time? Let Aluminum Coils sellers contact you.
