MaxiDiag Pro MD801 is multi-functional scan tool designed for technicians to troubleshoot engine, transmission, ABS and airbag systems for most of the vehicles on the road today.
Features:
1.One tool can do it all-troubleshoot and clear engine, transmission, airbag and ABS failures
2.Global OBDI & OBDII coverage (US, Asian, European)
3.Turn off engine, transmission, ABS and airbag warning lights for most USA, Asian and European vehicles
4.Support all 9 test modes of the latest J1979 OBDII test specs.
5.Read/clear codes for Tire pressure monitor systems
6.Enhanced OBDII mode 6
7.OBDII repair information
8.Display DTC definitions on unit screen
9.Retrieve ECU information (VIN, CIN, CVN)
10.Data graphing
11.Read, store, playback live data
12.CAN enabled with no adapter to buy
13.Memory/battery backup for off-vehicle data review and analysis
14.Software upgradeable via internet
15.Print data via PC-link.
Professional Vehicle OBD Diagnostic Scanner Maxiecu MPM COM Autodiag Car Diagnostic Interface
MPM COM interface + MaxiEcu 2 (full version, or you can buy the vehicle brand you need only)
MPM COM interface, designed by the manufacturer of the software, works perfectly with a lot of diagnostic software for lots of vehicles old and new.
Functions:
Fault codes will be shown with all available information
Read fault codes
Clear fault codes
Retrieves vehicle information (VIN, ECU)
Performs actuations and adaptations
Retrieve Real-time Data stream
Perform ECU Coding
Perform ECU Programming
Diesel engine, petrol engine, ABS, EDL, ASR, ESP, AIR-BAG, immobiliser
Instrument cluster, door electronics, steering column electronics, battery control
Vehicle electrical system control unit - BCM, trailer function AHF, Radio-navigation
software: you can download from the official website (buy the activation on official website is supported!
and buy activation from us directly is OK, too! We have wholesale price): http://maxiecu.com/download,
6,en.html
MaxiEcu 2 allows for a diagnosis of the best known brands: Renault, Mercedes, Peugeot, Citroen,
Nissan, Opel, Ford, Fiat, Alfa Romeo, Lancia and more soon (vehicles of the Volkswagen
Audi group).
It can diagnose vehicles to the standard OBD 2, but, unusually, it also works with those that are
incompatible with the standard.
Unlike the simple kit, this pro pack provides access to advanced functions (coding of injectors,
regeneration of the particulate filter, reset maintenance ...).
The MPM COM interface currently is one of the most advanced products in terms of automotive diagnosis.
Not only to be a 32-bit interface made high-quality, is also an interface that is compatible with
A lot of diagnostic software known (see list below). OBDII compatible, it supports
quite old communication protocols (OBD), studied software such as
maxiecu 2, which can support even older vehicles.
It is a product that will allow you to communicate with the Abs, airbags, etc ....
Do not hesitate a moment, this is a product that attracted us.
Advantages:
1.) built-in multiplexer
2.) compatibility with various diagnostic programs
3) reliable construction and software update for free
4.) simple and fast driver installation
5.) amazing speed of data transfer
6.) life-long warranty from factory directly for our distributors
Interface
MPM-COM
ELM 327
Processor
AT91SAM7S
PIC18F2580
Architecture
32 bite
8 bite
Number of operations per second
45million
4million
Flash memory capacity
256 KB
16 KB
Connection speed support
9600 bps to 1 Mbps
9600 bps to 500 Kbps
Custom communication protocols
Support
No support
Full operation of CAN bus
Support
No support
CAN BUS 1 wire protocol (Opel)
Support
No support
Software update
Support
No support
Multiplexer
built-in
none
RX obd-2 buffer capacity
256 B
8 B
Ignition line check
Support
No support
Energy saving mode
Eco Mode
none
As it can be seen above, MPM-COM has features unavailable in ELM 327, which increase the reliability
and availability of the programs connected to the interface.
technical Specifications
32-bit processor AT91SAM7S
32-bit architecture
Number instructions / s: 45000000
Connection speed up to 1Mbps
Support for non-standard protocols
Full support CAN bus
Latest software update
multiplexer
256 B buffer
USB
Software specifications:
MaxiECU software version 2 "Full"
--multi- languages
--Protocols OBD1 OBD2 +
--ISO15765-4 (CAN)
--ISO14230-4 (KWP2000)
--ISO9141-2
--J1850 VPW
--J1850 PWM
--Compatibility: Windows XP, 2000, Vista, 7 and 8, 8.1 (32 and 64 bit)
--Compatible with USB and BT ELM official version.
If you need the user manual or if you need additional cables for this interface, pls just let us know.
Diagnosis Opel from 1986 to 2010, depending on the vintage and equipment
Diagnosis Ford from 1994 to 2010, depending on the vintage and equipment
Diagnosis Fiat from 1994 to 2010, depending on the vintage and equipment
Diagnosis Alfa Romeo from 1997 to 2010, depending on the vintage and equipment
Diagnosis Lancia from 1998 to 2010, depending on the vintage and equipment
Diagnosis Nissan from 2001 to 2010 depending on the vintage and equipment
Diagnosis Citroen from 1994 to 2010, depending on the vintage and equipment
Diagnosis Peugeot from 1994 to 2010, depending on the vintage and equipment
Diagnosis Renault from 1980 to 2010, depending on the vintage and equipment
Diagnosis Mercedes from 1993 to 2010, depending on the vintage and equipment
Diagnosis Mazda from 1999 to 2010, depending on the vintage and equipment
Diagnosis Audi from 1990 to 2011, depending on the vintage and equipment
Diagnosis Seat from 1990 to 2011, depending on the vintage and equipment
Diagnosis Skoda from 1990 to 2011, depending on the vintage and equipment
Diagnosis Volkswagen since 1990 to 2011, depending on the vintage and equipment ( New! )
