Latest Version OBD Diagnostic Scanner for Opel OP-COM V1.45 with Best Price
Functions:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)
6. You can print out, save, or copy the fault codes to any other application.From the fault codes window, you can go directly to the measuring blocks window.
7. The program shows you measuring block information on many control module, you can choose anything from the list on your own.
8. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast! You can also run output tests on many controllers. PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps.
9. You will get a feedback on the state of the activated output. This will helps you to find the failed.components more easily.With DIGIOBD OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.
10. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC. You will need the vehicle security code, which can be found on the CAR-PASS. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva You can code SAB6, and SAB8 airbags with the software.
ELM 327 bluetooth OBD2 CAN BUS Scanner OBDII Wireless Diagnostic Tool
Functions:
Read diagnostic trouble codes, both generic and manufacturer specific, and display their meaning (over 3000 generic code definitions in the database)
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others
Hot Selling Fiat ECU Scan Adaptors Car ECU Scanner with Best Price
Why Buy diagnostic cables/connectors from us?
We are professional factory for cables. 12 years experience make cables and We offer best price in china.
We always use best quality plastic and other materials,not use bad plasticand cable usage is short and do'nt look decent.
We make all kinds of cables,almost full range of diagnostic cables.
We can make cables as your design and any requirements,any color,any length available.
We can make your own pinout for u for free.
We test every single pc before we send to clients,almost ZERO bad feedback.
we offer plenty cables in short time, thousands pcs can be made in a few days.
We stock plenty to avoid any shortage,not like trade companies,take money first and let clients wait.
A Life-time warranty.
Description:
Fiat Ecu Scan Adaptor Fiat Connector OBD2 16Pin OBD Cable for Fiat Four Colors (4 Pieces/ Set).
We can do any pinout as clients offered .
We can do any design as clients offered.
Specifications:
Type: OBD2 Cable
Applicable Models: Most of branded of cars, OBD Cars
Voltage: 12V
Power: 24W
Certification: CE, SGS
Material: Plastic
Color: Four colors
OEM: Yes
Shipping ways: China post, DHL, UPS, Fedex, TNT, EMS, HongKong post, etc
New Arrival BMW Inpa K+DCAN With Switch USB Interface For BMW Car from 1998-2008
Why buy BMW Inpa K+DCAN With Switch from us?
1.100% Original Brand New FTDI 232RL Chip,Most of in market from other suppliers use fake FTDI or other chip IC which many function will not be able to apply or very low quality and short life length.
2.We Sell more than 15,000pcs every year,back repair rate is almost "Zero"
3.Use good quality plastic not the bad ones in the market
4.Always stock enough for clients'need
5.Produce this product more than ten years and with our big sales volume,Price is best in china.
6.Can OEM with your new desgin
7.We are first factory in china to make this,a real original product from our factory
8.Life-long warranty directly from our factory.
Function:
BMW INPA K+DCAN With Switch1. Read and delete errors
2. Adaptations
3. Driver programming
4. Applu coding
and others...
Specification:
1. Supports protocols
1) Fast magistral D-CAN and PT-CAN (500 kbit/s)
2) Slow magistral K-CAN (100 kbit/s)
3) Standard BMW protocol (BMW OBD interface).
2. D-CAN for:
1) E60, E61 od 03/2007
2) E83 od 09/2006
3) E81, E87 od 03/2007
4) E90, E91, E92, E93 od 03/2007
5) E70 (new model X5)
6) R56 (new model MINI)
PT-CAN, K-CAN-fully switchable speed of magistral CAN - ou can diagnose driver without any car.
3. Protocol "BMW OBD interface" for older cars:
1) From 1995 to 1998 (don't need K-line).
2) From 1998 to 03/2008 (all models)
OBD2 Diagnostic Scanner For FORD-VCM OBD Auto Diagnostic Cable
Description:
Ford-VCM OBD is professional device for ford vehicles, F0rd-VCM OBD has the most functions of ford vcm ids, it is the mini version of ford vcm ids. Ford-VCM OBD works on ford car by OBD2 port directly.Ford-VCM OBD is diagnostic software for Ford vehicles.
It is designed for ford,mazda,and other few brand cars,really working very well with those cars 1996-2010, some 2011 cars.Ford-VCM OBD is diagnostic programmer for Ford vehicles 1996-2010. It can connect to various electronic control units ( ECUs) and display identification, read and clear fault code memory, display and record measured values and performactuator tests,some key programmer,etc.
Key features:
1. Support for wide range of ECUs and models
2. Easy connection via smart USB to OBD2 interface
3. Wide range of communication protocols and buses covered: 4.J1850 PWM, ISO, CAN
5. Automatic ECU recognition
6. Automatic vehicle scan
7. ECU Identification
8. Fault code (DTC) reading
9. Fault code clearing
10. Measured vaules / live data
11. Live data recording
12. Diagnostic protocol printing
13. Actuator tests
14. Control unit coding
15. PATS Immobilizer operations
16. Flash and serial memory programming
Packing:
1. Ford-VCM OBD interface.
2. CD-ROM with software and drivers
Forscan ELM 327 USB With Switch OBD2 CAN BUS Scanner OBDII Diagnostic Tool
This interface will allow you to realize a diagnosis on vehicles FORD group.
This is the only interfacein the market to be compatible with software like FORSCAN, FOCCCUS diagnostic software specially designed for vehicles of the brand FORD, MAZDA and some which are free.
If you have a FORD, this interface is for you!
Using the switch, so you can access the FORD proprietary networks like CAN HS, MS CAN.
You have a FORD and you do not know if it works on your vehicle. You can visit the official page of FORSCAN.
This interface will show you much more easily and quickly the settings you have selected. FORSCAN associated software, you can access many computers. A list of computers is also available on the official website.
Functions:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database)
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others
Specifications:
Output Protocol: S232 to bluetooth
Frequancy: 38400
Size: 88*46*25
Voltage: 12V
Current: 45mA
Bluetooth: 10M
Supported platform: Andriod, Symbian, Windows Mobile, palm, pc, pocket pc.
Forscan ELM 327 Bluetooth With Switch OBD2 CAN BUS Scanner Wireless Diagnostic Tool
This interface will allow you to realize a diagnosis on vehicles FORD group.
This is the only interfacein the market to be compatible with software like FORSCAN, FOCCCUS diagnostic software specially designed for vehicles of the brand FORD, MAZDA and some which are free.
If you have a FORD, this interface is for you!
Using the switch, so you can access the FORD proprietary networks like CAN HS, MS CAN.
You have a FORD and you do not know if it works on your vehicle. You can visit the official page of FORSCAN.
This interface will show you much more easily and quickly the settings you have selected. FORSCAN associated software, you can access many computers. A list of computers is also available on the official website.
Functions:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database)
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others
8 Pieces / Set OBD2 Truck Cables For Autocom CDP Pro Truck Diagnostic Interface Tool
Why Buy diagnostic cables/connectors from us?
We are professional factory for cables. 12 years experience make cables and We offer best price in china.
We always use best quality plastic and other materials,not use bad plastic and cable usage is short and dont look decent
We make all kinds of cables,almost full range of diagnostic cables.
We can make cables as your design and any requirements,any color,any length available.
We can make your own pinout for u for free.
We test every single pc before we send to clients,almost ZERO bad feedback.
we offer plenty cables in short time,thousands pcs can be made in a few days.
We stock plenty to avoid any shortage,not like trade companies,take money first and let clients wait.
A Life-time warranty.
Description:
8 Piece Truck Cables OBD2 Adapter Truck Diagnostic CableThe OBDII adapter cable set for trucks is compatible with Autocom CDP, TCS CDP Pro, MutliDiag Pro+ and Delphi DS150E diagnostic tools. The set includes a total of 8 truck cables.
Packaging list:
7 pin Knorr,Wabco Trailer Cable
12 pin MAN Cable
37 pin MAN Cable
IVECO 30P Cable
SCANIA 16P Cable
MB-14P Cable
Renault 12P Cable
VOLVO 8P Cable
ELM 327 USB ( FTDI chip + Power Protection Chips)
Functions:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database)
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others
