Solar Wafer Cutting Wire

Solar Wafer Cutting wire Silicon Cutting Sawing Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.

Solar Wafer Cutting wire Silicon Cutting Sawing Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.

Solar Wafer Cutting wire Silicon Cutting Sawing Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
Advantage of
Sawing Wire for Solar Wafer Cutiing
--------
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology
INTRODUCTION:
Solar Wafer Cutting wire Silicon Cutting Sawing Wire
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 10,000 tons of sawing wire
ISO/TS 16949 And ISO9002 certificated
Can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size of h wheel.

Sawing wire for multi sawing solar wfter cutting
Item: Sawing wire for multi-wire sawing
Ultra Fine Wire Saw For Cutting High Hardness of Monocrystalline Silicon
Shape:wire
Material: Imported C-steel
Coating:Brass,combinations
Number of wires:1 wire
Other Name: Solar Wafer Cutting wire Silicon Cutting Sawing Wire
Diameter:65um-350um available
Advantage of
Sawing Wire for Solar Wafer Cutiing

Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
http://en.hengxingchinese.com/
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsahttp://en.hengxingchinese.com/

Item: 0.1mm-0.7mm Brassed Coated Sawing Steel Wire for Solar Wafer Cutting
Shape:wire
Material: Imported C-steel
Coating:Brass,combinations
Number of wires:1
Diameter:65um-350um available
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology

Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.

Advantage of Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire
--------
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology

Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 10,000 tons of sawing wire
ISO/TS 16949 And ISO9002 certificated

Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire
Item: 0.1mm-0.7mm Brassed Coated Sawing Steel Wire for Solar Wafer Cutting
Shape:wire
Material: Imported C-steel
Coating:Brass,combinations
Number of wires:1
Diameter:65um-350um available
Advantage of Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire
--------
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology

Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.