Lle101101 Lle Series Liquid Level Sensor

Honeywell BW Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. The first single-gas detector with the 1 Series sensor for CO, H2S and O2

Features & Benefits:
User-friendly operation,
Easy-to-read display for multiple languages,
Lightweight convenience,
Ease of maintenance,
Serviceability,
The new 1-Series sensor for enhanced reliability,
Connected Bluetooth Low Energy (BLE) capabilities.

Agecho ultrasonic sensors salient features:
Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c.
Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available.
Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band).
Agecho accuracy is 1% of the full scale.
Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional)
Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module.
Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use.
Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target.
Agecho operating temperature 0 to 65 degree celsius.
Agecho temperature compensated measurement for better accuracy (optional).
Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.

Product Parameter:
Type: Optical Level Sensor
Power supply: 5V DC
Material: PC or PSU
Size: 1.46*1.46*2.57
Operating Temperature: -20~ +65 °C
Storage Temperature: -40~ +85 °C
Working Life: 50000 Hrs

Products Features:
1. No mechanical moving components and with high reliability.
2. Small in size and low in cost.
3. High liquid level control precision and can be installed from any direction
4. Satisfying the requirements in Safety Standards.
5. The sensor itself satisfies RoHS requirements.
6. Waterproofing standard IP67.
7. Accuracy is between ±1mm.

Application:
Water dispenser
Water heater
Humidifier
Medical devices or equipment
Electrical appliances and equipments etc. requiring liquid-level control

Item Name: Water Level Sensor Float Switch
Item No: CFS-103L
Color: black
Cable Length: 350mm / 13.78inch
Switch Size: OD17 x 85mm
Thread Dia(Approx) : M16*1.5
Max Contact Rating: 10W
Float Body Material: polypropylene
Float Ball Material: polypropylene
Working Voltage: AC110V-220V
Working Temperature: -10~85
Max Temperature: 85
Working Pressure: 0.4 Mpa
Max Pressure: 0.4Mpa
Max Switching Current: 0.5A
Max Breakdown Voltage : 220VDC
Max Carry Current : 1.0A
Max Contact Resistance: 100m Ohm
Max Carry Current : 1.0A

APPLICATION This kind of level sensor float switch is designed for the Ink cartridge of advertising printing machine, oil cartridge, ink box, etc. It also can be using to any other container to monitoring the liquid level.
HOW IT WORK This liquid level sensor float switch can be easily converted the up or down position monitoring by inverting the float after unload the E-ring.
EASY TO USE, HIGHT RELIABLILITY This kind of float switch is simple and reliable, easy to install and use strong anti-interference with high reliability.
LONG SERVICE LIFE DC24V AC 110V circuit can be used, electrical lifespan: 1 million times.
OUR SERVICE We offer standard product and custom design service over liquid level sensor with different materials & different sizes, send me message for further support if you need customized product.

PRODUCT SPECIFICATION:
Item Name: Water level sensor float switch
Color: Level Sensor Body Stainless Steel Color
Cable Length: 350mm / 13.78
Switch Body Size: OD28 x 28mm
Thread Dia (Approx): M10*1.0mm
Max Contact Rating: 10W
Float Body Material: Polypropylene
Float Ball Material: SUS 304 Stainless Steel
Wire Material: Fiberglass pipe
Working Voltage: DV24 - AV 110V
Working Temperature: -10~+85
Max Temperature: 85
Working Pressure: 0.4Mpa
Max Pressure: 0.4Mpa
Max Switching Current: 0.5A
Max Carry Current: 0.5A
Max Contact Resistance: 100mOhm
Max Carry Current: 0.5A
PACKAGE INFORMATION:
Package Weight: 7.34 ounces
Packing list: 6 x Liquid level sensor Float Switch
Unit Weight: 0.8 ounce
Package Size: 15x8.5x10.5cm / 5.8x3.3x4inch

WHAT WE CAN DO
We are professional manufacturer of the level sensor float switch, and we offer standard product and custom design service over all kinds of float switch level switch, temperature switches, flow switches, magnetic switches, reed switches, liquid level, pressure and flow sensor, welcome to send us inquiry for suggestion or support any time.

FS-IR02B series Water Liquid Single Point Level Sensor, the theory is infrared, it can totally replace traditional float level switch, it controls the level though output high or low voltage. When the detected level is in air, due to reflect of the prism,most of light will enter receiver LED, optical level sensor will output high voltage. When the detected level is in water, due to refraction of the liquid, just less of light enter receiver LED, optical level sensor will output low voltage.

The FS-IR2003D is a single point liquid level switch that can operate in high pressure, high temperature, and aggressive
environments due to its stainless steel and glass construction. This level switch offers industrial supply voltages and outputs that can directly drive loads. This model has a wide operating voltage, which is from 5VDC to 24VDC. The output ways have two types, NPN and PNP. The sensor can detect the presence or absence of almost any liquid, and can be configured to output a high or low signal in either a wet or dry state.

The microcontroller based Stainless Glass Range liquid level switches are solid state, incorporating an infra-red LED and
phototransistor which are optically coupled by the tip when the sensor is in air. When the sensing tip is immersed in liquid, the infrared light escapes making the output change state. The sensor can detect the presence or absence of almost any liquid type; oil or water based. It is insensitive to ambient light and is not affected by foam when in air or by small bubbles when in liquid.

Horizontal level sensor are side-mounted through a hermetically sealed hole on the side of a tank. With a doughnut-shaped floats rising and falling with the level of the liquid around stems, actuating reed switches inside the stems. Wires then send an electric signal to the outside of the tank , making these components essential for accurate monitoring.

Features of horizontal water level sensor
Compact size and easy to install.
No power consumed in standby status.
Design to work in harsh environment
Size, cable length, connect and float are customizable

There are many position sensor manufacturers, but we are one of the best choices for you.