Liquid Level Sensor

Agecho ultrasonic sensors salient features:
Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c.
Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available.
Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band).
Agecho accuracy is 1% of the full scale.
Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional)
Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module.
Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use.
Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target.
Agecho operating temperature 0 to 65 degree celsius.
Agecho temperature compensated measurement for better accuracy (optional).
Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.

Horizontal level sensor are side-mounted through a hermetically sealed hole on the side of a tank. With a doughnut-shaped floats rising and falling with the level of the liquid around stems, actuating reed switches inside the stems. Wires then send an electric signal to the outside of the tank , making these components essential for accurate monitoring.

Features of horizontal water level sensor
Compact size and easy to install.
No power consumed in standby status.
Design to work in harsh environment
Size, cable length, connect and float are customizable

There are many position sensor manufacturers, but we are one of the best choices for you.

A vertical water level sensor is a mechanical device that monitors liquid levels inside a container. In typical applications, a vertical liquid level sensor is to trigger an action when the liquid reaches a certain level.

Vertical liquid level sensors are made up of two main components: a center tubed magnetic float and a reed switch. Both the float and the reed are operated by magnets. When the float reaches a predetermined level, the reed switch reacts by closing or opening.

Features of Vertical Liquid Level Sensor
What's the advantage of a vertical liquid level sensor?
Non-powered, reliable, direct indication, relatively inexpensive, various outputs

Can BST make explosion proof liquid level sensor?
Yes, ATEX certified.

What's the output of a liquid level sensot?
Analog or digital, depends on customer's needs.

There are many position sensor manufacturers, but we are one of the best choices for you.

Item Name: Water Level Sensor Float Switch
Item No: CFS-103L
Color: black
Cable Length: 350mm / 13.78inch
Switch Size: OD17 x 85mm
Thread Dia(Approx) : M16*1.5
Max Contact Rating: 10W
Float Body Material: polypropylene
Float Ball Material: polypropylene
Working Voltage: AC110V-220V
Working Temperature: -10~85
Max Temperature: 85
Working Pressure: 0.4 Mpa
Max Pressure: 0.4Mpa
Max Switching Current: 0.5A
Max Breakdown Voltage : 220VDC
Max Carry Current : 1.0A
Max Contact Resistance: 100m Ohm
Max Carry Current : 1.0A

APPLICATION This kind of level sensor float switch is designed for the Ink cartridge of advertising printing machine, oil cartridge, ink box, etc. It also can be using to any other container to monitoring the liquid level.
HOW IT WORK This liquid level sensor float switch can be easily converted the up or down position monitoring by inverting the float after unload the E-ring.
EASY TO USE, HIGHT RELIABLILITY This kind of float switch is simple and reliable, easy to install and use strong anti-interference with high reliability.
LONG SERVICE LIFE DC24V AC 110V circuit can be used, electrical lifespan: 1 million times.
OUR SERVICE We offer standard product and custom design service over liquid level sensor with different materials & different sizes, send me message for further support if you need customized product.

PRODUCT SPECIFICATION:
Item Name: Water level sensor float switch
Color: Level Sensor Body Stainless Steel Color
Cable Length: 350mm / 13.78
Switch Body Size: OD28 x 28mm
Thread Dia (Approx): M10*1.0mm
Max Contact Rating: 10W
Float Body Material: Polypropylene
Float Ball Material: SUS 304 Stainless Steel
Wire Material: Fiberglass pipe
Working Voltage: DV24 - AV 110V
Working Temperature: -10~+85
Max Temperature: 85
Working Pressure: 0.4Mpa
Max Pressure: 0.4Mpa
Max Switching Current: 0.5A
Max Carry Current: 0.5A
Max Contact Resistance: 100mOhm
Max Carry Current: 0.5A
PACKAGE INFORMATION:
Package Weight: 7.34 ounces
Packing list: 6 x Liquid level sensor Float Switch
Unit Weight: 0.8 ounce
Package Size: 15x8.5x10.5cm / 5.8x3.3x4inch

WHAT WE CAN DO
We are professional manufacturer of the level sensor float switch, and we offer standard product and custom design service over all kinds of float switch level switch, temperature switches, flow switches, magnetic switches, reed switches, liquid level, pressure and flow sensor, welcome to send us inquiry for suggestion or support any time.

The FS-IR2003D is a single point liquid level switch that can operate in high pressure, high temperature, and aggressive
environments due to its stainless steel and glass construction. This level switch offers industrial supply voltages and outputs that can directly drive loads. This model has a wide operating voltage, which is from 5VDC to 24VDC. The output ways have two types, NPN and PNP. The sensor can detect the presence or absence of almost any liquid, and can be configured to output a high or low signal in either a wet or dry state.

The microcontroller based Stainless Glass Range liquid level switches are solid state, incorporating an infra-red LED and
phototransistor which are optically coupled by the tip when the sensor is in air. When the sensing tip is immersed in liquid, the infrared light escapes making the output change state. The sensor can detect the presence or absence of almost any liquid type; oil or water based. It is insensitive to ambient light and is not affected by foam when in air or by small bubbles when in liquid.

For laboratories, the cell samples stored in liquid nitrogen tanks are relatively precious. If liquid nitrogen is not added in time, the cell samples will lose their activity due to insufficient liquid nitrogen, causing unnecessary losses. To avoid this kind of situation, we can choose a liquid nitrogen tank alarm to help us check how much liquid nitrogen is left in the tank, and remind us to replenish it in time when the liquid nitrogen is insufficient.

What is a liquid nitrogen tank alarm?
The liquid nitrogen tank alarm is specially developed and produced for measuring the liquid nitrogen balance and temperature in the liquid nitrogen tank. It uses imported high-precision sensor probes and is powered by dual 18650 large-capacity batteries. The USB port can be connected to an external power supply for power supply and charging. It has an ultra-low power consumption design. A single battery can last for 4 months (real-time data is reported once every 10 minutes). With accurate measurement and excellent performance, it is widely used in liquid nitrogen cryogenic equipment, pharmaceutical warehouses, cold chain transportation, laboratories and other places.
working principle:
It uses imported high-precision sensor probes to measure the temperature of liquid nitrogen and output information to the terminal;
Liquid nitrogen tank alarm features:
1. Imported high-precision probe, with high measurement accuracy, large range and good consistency.
2. With a cloud monitoring platform, there is no need to monitor hosts, collectors and other equipment.
3. Easy to use, you can use the mobile APP or log in to the web page to view the data.
4. Support SMS alarm and email alarm.
5. Realize cloud monitoring of high temperature, low temperature, high humidity, low humidity, offline, low battery, power outage, etc.
Note: The temperature probe should be fixed in the appropriate position according to actual needs.
6. Low power consumption design, using a large-capacity battery, rechargeable; the battery is anti-reverse connection, and the phone will not burn if the battery is installed backwards.
7. Offline recording function, normal monitoring and recording of data when the network is disconnected, and automatic reporting to the cloud platform after the network is connected.
8. Desktop wall-mounted magnetic structure design, easy to install; has super stability and anti-interference ability.

Item Name: Liquid water level sensor float switch
Model: CFS -1040P
Color: white
Cable Length: 350mm / 13.78
Switch Body Size: OD19 x 16.6mm
Thread Dia (Approx): M8*1.25
Max Contact Rating: 10W
Float Body Material: PP
Float Ball Material: PP
Working Voltage: AC 110V-220V
Working Temperature: -10~+85
Max Temperature: 85
Working Pressure: 0.4Mpa
Max Pressure: 0.4Mpa
Max Switching Current: 0.5A
Max Breakdown Voltage: 220VDC
Max Carry Current: 1.0A
Max Contact Resistance: 100mOhm
Max Carry Current: 1.0A

float liquid level sensor LS20-700P10T1AK
In order to ensure the high quality of the products, YOYIK uses advanced CNC processing equipment and automated production lines in the production process, and cooperates with strict quality inspection processes to ensure that each product meets international quality standards. At the same time, it actively develops efficient and energy-saving power equipment accessories to help customers achieve green transformation and jointly promote the sustainable development of the energy industry.

Yoyik can offer many spare parts for power plants as below:

#DF-float liquid level sensor LS20-700P10T1AK-DF
SWTCH PRSR DLE50VA50P01
System Power card MBD 205
CARD MOV IMC30
Connection Cable CON021/916-160
high precision lvdt DET800A
Ethernet Switch MOXA
Bolt electric heating rod ZJ-20-R2
PCB IO PORT APF7.820.077C
Magnetc Spd Pckup Sensor SDJ-SG-2W
LVDT Sensor 186.33.31.02
analog displacement sensor TDZ-1E-31 0-50
Eddy Current Sensor PR6422/101-040
CPU board GD2511008
Eddy Current Sensor PR6422/102-100
Contactor LC1N3201CC5N 36V
speed sensor CS-1H-G-060-03-02
Procision transient speed monitor HZQW-03A
BENTLY Preamplifier 330180-51-00
2 wire pt100 sensor WZPK-237S
LVDT sensor DET300B
General Purpose Analyzer LXV404.99.00502
LVDT transmitter XCBSQ-01/600-01-22
Thermocouple WREKD2-04
Electric actuator SND-Z30-24S
heat expansion sensor TD-2-A2 (0-35mm)
LVDT transmitter XCBSQ-03/100-02-22
Conductivity Meter 2402B
6W Wall mount speaker L-PWP06A
Eddy Current Sensor PR6423/004-040
speed meter WZ-3C-A-1ï½?6000
Transmitter 3051CD3A22A1AM5B4DF
Liquid level switch BH-016021-016
Eddy Current Sensor PR6423/004-021
Eddy Current Sensor PR6424/100-101
Temperature Sensor WZP-201
Bolt electric heating rod ZJ-20-17
float liquid level sensor LS20-700P10T1AK

float liquid level sensor LS20-700P10T1AK

MY-DFYL-2024-7-11