Please click here to check who's online and chat with them.

Slag Removal

Supplier From China
Apr-25-18

Our advantages:
1. High purity
- control the consistency of raw material from the mine resource.
- introduce automatic whole-process equipment to ensure product consistency.
- not allowed any harmful impurities during raw material & production process.

2.Fine classification
- choose different raw materials according to their characteristics.
- various product category, to provide customized slag treatment scheme

3. Environment friendly & health
- the reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal.
- the physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health.

4).Mechanism of slag removing
- low softening point, high viscosity. After being scattered into the metal surface, the product will expand and
- spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which
Sticks to the scum in the metal, to make slag collected and removed.

Price and Minimum Quantity

Price: $210
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Slag Removal

Sep-18-17
Supplier From Shandong, China
Mar-02-12

E71T-1 Flux Cored Welding Wire

$1.30K
MOQ: Not Specified
Supplier From Qingdao, Shandong, China
 
Carbon Steel Steel Flux Cored Arc Welding E71T-1
E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength and good notch toughness is required. It is an excellent general purpose welding wire. This wire has very low fume, stable arc, good slag removal and excellent mechanical properties.

AWS Specification:
AWS A5.20

AWS Classification:
E71T-1

Typical Applications:
• Buff and fillet welding of hulls and storage tanks
• Structural steel
• Farm machinery
• Construction equipment
• General carbon steel fabrication

Welding Current:
DCEP (Electrode Positive, Reverse Polarity)

Typical Wire Chemistry:
100% CO2 75%Ar/25%CO2

C: 0.05 0.05
Si: 0.56 0.64
Mn: 1.39 1.61
P: 0.008 0.005
S: 0.014 0.01

Welding Positions:
All Positions

Typical Mechanical Properties (As Welded):
Typical Mechanical Properties (As Welded) :

100% CO2 75%Ar/25%CO2
Yield Strength, Mpa: 480 470
Tensile Strength, Mpa : 570-690 560-690
% Elongation: 25.8 26.5

Available Diameters:
0.8mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm

Available Spools:
plastic spool and metal basket

Available Weight per Unit:
0.9kg, 1kg, 5kg 15kg.


In standard export packing or on customer requirements.
Mar-04-23
Supplier From Qingdao, China
Feb-21-23
Supplier From Qinyang, China
Jun-30-20
 
Usage
 The injection refining equipment is used for refining, degassing and slag removal of molten aluminum in a static furnace.
Equipment Features
 Good refining effects. The equipment has the advantages of both gas refining and flux-refining.
Low consumption of refining agent, and uniform feeding.
 Low metal loss. After proper flux-refining, there is less dross on the melt surface and the dross is loose.
The metal is rarely encased and little metal is taken out during slag removal.
 
Technical Parameters
Barrel capacity: 15L, 30, 45L
 Refining gas type: high-purity nitrogen or argon
Refining gas pressure: 0.10.4MPa
  Maximum refining gas flow: 300NL/min
  Flux flow: 0-3000g/min, adjustable
  Flux size: 1070 meshes
Jun-30-20
 
Introduction:
A graphite rotor is immersed in the molten aluminum in a crucible (or ladle) to rotate while a high-purity inert gas such as nitrogen (or argon) is injected into the molten aluminum. As the graphite rotor rotates, the inert gas and refining agent can remove gases and slags from the molten aluminum.
Divided into several basic models, including mobile, stationary and suspended.
Divided into types such as rotary and rotary + dust adding
Equipment Features
Able to remove gases (mainly hydrogen) and oxides from the molten aluminum more effectively. The equipment has the advantages of both gas refining and flux-refining. After rotary injection, the hydrogen content in molten aluminum alloys will reach up to 0.1ml/100g, the pinhole degree will reach up to level 1, the density will be less than 1, and a stable effect will be achieved. Low metal loss. After proper flux-refining, there is less dross on the melt surface and the dross is loose; the metal is rarely encased and little metal is taken out during slag removal. Low refining agent consumption and uniform feeding.
Equipped with an anti-falling mechanism, a refining agent material level measurer and an air channel leakage detector.
Multiple technological processes can be executed. When used with different functions of fluxes, it can be used for high-efficiency modification, degassing and slag removal.
â?¢�  The rotor bearing is a high-temperature bearing, not needing to be air-cooled. The spindle can work without stop at a high temperature of 200�°C.
Site working conditions are significantly improved.

Technical Parameters Refining time: 0~99min
â?¢�  Gas flow for refinement: 12~40NL/min
Inert gas for degassing: N2 or Ar with a purity greater than 99.996% Gas working pressure: 0.1-0.4MPa
Molten aluminum temperature: 640 850
Amount of molten aluminum treated: 200 3000kg
  Rotor speed: 0-600r/min (max1000)
Mar-10-15
 
Submerged arc welding welding flux lj-sj501 sintered flux

Lj-sj501 welding flux aws a 5.17 f6a0-el12 soldering flux f7a2-em12k

Flux type: aluminum-rutile

Basicity index: 0.5-0.8

Remark: 1.Before welding, fluxes should be baked for two hours at 300-350ºc.
2.Removal of rust, oil, dirt, water, impurities, etc in welding areas.


Packing: 25kg/bag, pallets are available.

Lead time: 2 weeks

Performance: vrey good weld bead appearance, excellent slag removal with narrow groove and fillet welds. High resistance to cracking and porosity and insensitive to oil, rust, scale and dirt on the surface to be welded.

Applications: used for ordinary carbon steel, low alloy structure and boiler quality steel and high speed welding.

Contact: miss helen duan
Tel/fax: 0086-532-85641729



25kg/bag
Mar-10-15
 
Submerged arc welding welding flux lj-sj501 sintered flux

Lj-sj501 welding flux aws a 5.17 f6a0-el12 soldering flux f7a2-em12k

Flux type: aluminum-rutile

Basicity index: 0.5-0.8

Remark: 1.Before welding, fluxes should be baked for two hours at 300-350ºc.
2.Removal of rust, oil, dirt, water, impurities, etc in welding areas.


Packing: 25kg/bag, pallets are available.

Lead time: 2 weeks

Performance: vrey good weld bead appearance, excellent slag removal with narrow groove and fillet welds. High resistance to cracking and porosity and insensitive to oil, rust, scale and dirt on the surface to be welded.

Applications: used for ordinary carbon steel, low alloy structure and boiler quality steel and high speed welding.

Contact: miss helen duan
Tel/fax: 0086-532-85641729



Packing: 25kg/bag, pallets are available.
Sep-30-16
 
Agglomerated acid flux for welding of ordinary carbon manganese, low alloy structure and boiler quality steel in combination with appropriate SAW wire (such as EL8,EM12. EM12K). The flux suitable for high speed welding and provides very good weld bead appearance and excellent slag removal even with narrow groove and fillet welds. The other character of LJ-SJ501 is high resistance to cracking and porosity. Especially it is insensitive to oil, rust, scale and dirt on the surface to be welded. Most being applied to double-side with single pass weld and fillet welds. As the consumption of the flux is very low,it is very economical.
• Flux type: Aluminum-Rutile
• Basicity index: 0.5-0.8
• Grain size:2.0-0.28mm(10-60meshes)

Verification Status