Dp Transmitter

Key Features:
1.High sensitivity
2.Robust Design, over pressure protected
3.Wear resistant sensor
4.High resistance to corrosion
5.Low hysteresis
6.Large LED Display

Key Specifications:
1.Measuring range:
0 ~ 6 mbar to 0 ~ 60 mbar, max static pressure: 32 bar
0 ~ 32 mbar to 0 ~ 320 mbar, max static pressure: 140 bar
0 ~ 130 mbar to 0 ~ 1300 mbar, max static pressure: 140 bar
0 ~ 500 mbar to 0 ~ 5000 mbar, max static pressure: 140 bar
0 ~ 2 bar to 0 ~ 20 bar, max static pressure: 140 bar
2.Linearity: < 0.1 %
3.Hysteresis: < 0.1 %
4.Temperature coefficient: < 0.5 % / 10° C
5.Operating ambient temperature: -10° C to +70° C
6.Operating media temperature: 0° C to +80° C
7.Protection class: IP67
8.Electrical output: 4-20mA
9.Power supply: 24 V DC
10.Pressure connection: 2 x 1/4â?³ NPT
11.Display: analog display with 0 ~ 100% scale. digital display (only with communication module option -K installed)
12.Electrical connections: internal terminal block
13.Material (media contact): Stainless steel 316 L (1.4404)
14.Electronic housing: Aluminum, surface coated
15.Marking / approval: CE mark, complies with EMV specifications EN 50082-1 and EN 50082-2

Application areas:
1.Filter technique
2.Precision measurements in air conditioning conduits
3.Clean room pressure compensation
4.Burner vacuum measurement
5.Circulating air controlling in furnaces

Industrial areas:
1.Air conditioning and ventilation systems
2.HVAC and ventilation application
3.Environment monitoring
4.Clean room and laboratory rooms

Key Features:
1.Very low pressure measurable without long-term drift
2.Rugged design
3.Maintenance free
4.Over-pressure protected

Key Specifications:
1.Measuring range: 0 ~ 25 Pa to 0 ~ 1000 Pa
2.Maximum static operating pressure: 1.0 bar
3.Maximum safe pressure: 1.7 bar
4.Straight line error (max.): 1.0 % Full scale
5.Pressure connection: screw clamp connectors (aluminum) for 6/4 mm or 8/6 tube
6.Repeatability: 0.1 % full scale
7.Operating ambient & media temperature: -10° C to +70° C
8.Protection class: IP65 per DIN EN 60529
9.Linearity: < 2% Full scale
10.Electrical output: 4-20mA linear, 2 â?? wire
11.Power supply: 24 V DC
12.Material, housing: Polyamide PA 6,6
13.Materials, media contact: Silicon, PVC, aluminum, brass

Application areas:
1.Filter status / condition monitoring
2.Precision air duct measurement
3.Clean room pressure balance monitoring
4.Burner air feed low pressure detection
5.Oven air feed control

Industrial areas:
1.Air conditioning and ventilation systems
2.Auditorium, office, conference rooms
3.HVAC and ventilation application
4.Environment monitoring
5.Clean room and laboratory rooms

Key Features:
1.Explosion proof ATEX certification with CE Ex II 3 G c EEx nA IIC T4 for DE38###R and CE Ex II 3 D c IP65 T125 for DE38###S
2.Robust design with high repeatability
3.Over pressure protection
4.Wear free non-contact LVDT sensing element, thus no maintenance
5.Signal output with possibility of various characteristic curve
6.Characteristic conversion of output via 3?¦.30 entries table
7.Complete set-up of all parameters and print out by using optional PC programming interface EU03
8.Measuring range: 0-400 mbar to 0-1600 bar
9.Operating temperature: Ambient: -10°C to +70°C; Media:-10°C to +70°C
10.Protection class: IP65 per DIN EN 60529
11.Output: 0/4-20mA, 0-10 VDC
12.Display: 3 ½ digit LCD

Applications areas:
1.Monitoring of compressors, filters and vacuum systems
2.Measurement of differential pressure between supply and return fuel lines in heating & 3.cooling systems (Chillers)
4.Flow measurement ?? lubricants, oil, hydrocarbons, water, gases
5.Control pressure ?? air, gases, oil, water, lubricants
6.Level measurement- tank, container of lubricants, oils, water, liquids etc

Industrial areas:
1.Cement plants
2.Nuclear plants, coal or gas fired power plants
3.hydro power plants
4.Manufacturing and chemical plants