Single Roller Coater

• This machine is designed for painting the surface of flat plates. Coating paints by roller. The amount of the paint is controllable by the roller. The painting pump recycles the paints.
• Line speed: 2-18m/min. Quick disassembling rollers. High production efficiency
• Coating capacity: 8-30g. Adjustable. The painting film is thin and uniform. Great coating result.
• Feeding speed adjustable. Thickness controllable. Paint heating. Intelligent controller. Simple and practical operation.
• Steel rollers can be lifted with optional electric motor. Roller has pneumatic emergency and rises to protect. Interlock protection. Safe operation.
Rubber roller:NBR/EPDM/PUR/Q/Laser
Application roller:F250mm
Doctor roller:F175mm
Lacquer circulation pump
Roller Scrapper
Metering roller can increase heating controller
Power distribution box:L1.L2.L3.N.PE
Removable bottom casters
CE certificate

Roller coater
Double Roller Coater is a kind of coating which is applied to the coating surface by the coating roll, and the coating machine is the main type of coating machine. The amount of coating can be adjusted by measuring the pressure between rollers. The pressure is strengthened, the amount of passing paint is reduced, and the amount of coating is also reduced.

2 inche roller frame
Description:
Single wire roller frame for paint rollers cover, for use corner wall surface
Spcification:
Inc-plated main rod
New plastic handle

Description:
single wire rod and cap frame with yellow plastichandle for 7 x 1½ roller cover
Spcification:
â?¢ Durable Plastic frame
â?¢ Wire Materials: Metal, Zinc-plated
Cohwa supply a range of paint rollers suitable both DIY'ers and professional painter. There are also mini rollers and radiator rollers available. Paint rollers are supplied either in sets or together with sleeves, roller cages and paint trays, there are a multitude of sizes available, from 4â?³to 15" wide, and a selection of materials to choose from including high density foam, polyester, acrylic, microfiber and simulated sheepskin in a variety of pile types.

Description:
Single wire roller frame for mini paint rollers refill,for use corner
wall surface
Spcification:
Chrom-plated Main Rod
New Plastic Handle
SKU List

SIZE DIAMETER CASE
4"x 12" 5.4mm 120
4"x 20" 5.4mm 120
Cohwa supply a range of paint rollers suitable both DIY'ers and professional painter. There are also mini rollers and radiator rollers available. Paint rollers are supplied either in sets or together with sleeves, roller cages and paint trays, there are a multitude of sizes available, from 4â?³to 15" wide, and a selection of materials to choose from including high density foam, polyester, acrylic, microfiber and simulated sheepskin in a variety of pile types.

Easy To Apply
Single Pack
Superior Durability
Excellent Gloss Retention

SCOPE
USES
Kisomin Aluminium Paint is a modified Synthetic Resin based enamel.
It provides high Light fastner and brightness with excellent orientation
finish. it has good adhesion on interior or Exterior surfaces.
Recommended as a decorative finish coat & can be applied on
surfaces like Grill, Windows, Cabinets & wide range Metal Structures.

FEATURES/ BENEFITS
* Smooth durable finish.
* Smooth flow & easy to apply.
* Excellent coverage & hiding.
* Superior surface protection

KEY ATTRIBUTES
* Application temperatures : 10-44 degc

VISCOSITY FOR APPLICATION
* For Brushing 40"-45" at 30C
* For Spraying 18" 20" at 30C
* For Roller 55"-60" at 30C

SURFACE PREPARATION
APPLICATION
BRUSH
CONVENTIONAL SPRAY
NOTES :
HEALTH & SAFETY
Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of
Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the
surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve
desired viscosity & filter through white cloth. Apply Kisomin Paint to finish.
Stir the base thoroughly and then mix to uniform consistency.
Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4
Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm.
1. Use off the mixed paint .
2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist
3. Brushes and spray equipment should be cleaned with Thinner,
4. Special care to be taken to close immediately the partly used Diluted Material.
Please refer to the separate Material Safety Data Sheet available with detailed information

HI - Performance Syn. Enamel Paint
Superior Durability Color Pigment System
Easy To Apply By Brush , Roller And Spray

PRODUCT PARAMETERS
1. Type : Single Pack
2. Composite : Modified Oil Based Resin with Finest Bright
Pigments, Hydrocarbon solvent and addives
3. Use Recommended Thinner to make
Applicaon Viscosity
4. Applicaon Tools : Brushing, Spraying or
Roller
5. Flash off = 30 Minutes
6. Drying Time :
Surface Dry : 4 Hours
Hard Dry : Overnight
7. Curing Time : 72 hours
8. Over coang Interval : MIN : Overnight
MAX : 5 Days
9. Color : Assorted Shades
. Finish :
10 Smooth Finish
11 Thinner / Cleaner KISOMIN THINNER
12. Shelf Life: Up to 12 Months as long as the sealed containers
are kept under cover in a dry place under normal
temperature.

SCOPE
USES
Kisomin durable synthec enamel are long lasng & solvent based
paint used for wide range of surface.
Recommended as a decorave finish coat & can be applied on
surfaces like Metal, Cement Brickwork, Asbestos Grills and Wooden
surfaces like doors, Windows, Cabinets & wide range of furniture

FEATURES/ BENEFITS
* Smooth durable finish.
* Smooth flow & easy to apply.
* Excellent coverage & hiding.
* Superior surface protecon.

KEY ATTRIBUTES
* Applicaon temperatures : 10-44 degc

PERFORMANCE PROPERTY
Chemical Resistance
A Exposures Splash & Mild Fumes/Outdoor
Spillage Resistance
cid + +
Alkalis + +
Solvent NA NA
Salt ++ ++
Water +++ +++
Flexibility +++
Adhesion +++

Excellent : +++
Very Good : ++
Good : +

SURFACE PREPARATION
APPLICATION
BRUSH
CONVENTIONAL SPRAY
NOTES :
HEALTH & SAFETY
Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign parcles. System of
Coang should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the
surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before applicaon of paint, thin down to achieve
desired viscosity & filter through white cloth. Apply Kisomin Paint to finish.
Sr the base thoroughly and then mix to uniform consistency.
Apply without thinning
Add Kisomin thinner to adjust viscosity depending on spray condion. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm�².
1. Use off the mixed paint .
2. Do not apply when temperature falls below 10 C or rises above 50�°c and when relave humidity rises above 90%. Do not apply during rain, fog or mist
3. Brushes and spray equipment should be cleaned with Thinner,
4. Special care to be taken to close immediately the partly used Diluted Material.
Please refer to the separate Material Safety Data Sheet available with detailed information